Skip Navigation

Focal Integration IS 130

5-1/4" component speaker system

Item #: 091IS130

7 Reviews

This item is no longer available.

Original Price: $179.99

Shop all Component Systems

Does it fit my car?

Select your car

Find what fits your car

Can't find your exact car?

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration IS 130 component system features 5-1/4" woofer cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, for a woofer that plays accurately with no added resonances.

Adjustable tweeter
The separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging in many vehicles.

Built-in crossover networks
The crossover networks are built-in, so you don't have those extra boxes to install. Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers.

Product Highlights:

  • component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 woofer grilles
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • built-in crossovers
  • 4-ohm impedance
  • 5-60 watts RMS power range (120 watts peak)
  • frequency response: 75-20,000 Hz
  • sensitivity: 91.9 dB
  • woofer top-mount depth: 1-15/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Focal Integration IS 130 Reviews

Average Customer Review:

7 Reviews

Good, but not deep

Written by: Joseph from Missouri on August 30, 2013

2005 Toyota Corolla
Crutchfield Customer Review (What's this?)

I expect that the 6.5/6.75 inch would make a greater difference in midbass extention. The bass is weak, but that might be dealt with by a good subwoofer -- that is my next step.



Way better than I expected!

Written by: Kenlan21 from San Antonio, tx on August 7, 2013

2013 Nissan Versa
Crutchfield Customer Review (What's this?)

I bought these thinking that they were entry level and I would just be "satisfied" with these....Boy was I wrong! The sound quality was way better than I expected, this was a great purchase

Pros: Great speakers for the price!

Cons: None yet

Focal Sound

Written by: Anonymous from Los Angeles, CA on June 22, 2013

Crutchfield Customer Review (What's this?)

Strong mid-tones with a clear and defined sound quality. I run these and a subwoofer through a Kenwood amp and it sounds fantastic!



Focal IS 130s

Written by: Anonymous from Lexington NC on June 21, 2013

Crutchfield Customer Review (What's this?)

I installed these In a Ford F-150 ext cab front doors and they sound great. They are just running off of the factory reciever. Im sure when I install an amp they will sound even better!

Pros: Great sound

Cons: amp is a must

Focal IS 130

Written by: Ron from Longview, WA. on March 27, 2013

Crutchfield Customer Review (What's this?)

I couldn't take what was delivered to my ears any more from the "stock 4, 5 1/4 inch speakers with separate tweeters " in my 2000 Freightliner anymore ! An avid Alpine system supporter for years, a very good friend suggested I try this Focal brand, he looked at what I had we talked and he gave me the ID for the 2 pair of Focal's to install. I found them @ Crutchfield for a better than market price, got them, installed them, no sub or amp yet installed, but what a wonderful, clear, crisp sound. I can listen @ considerably less volume than before and truly enjoy what I hear. Thank You Crutchfield



They're Focal

Written by: Eddie from Knoxville, Iowa on March 4, 2013

Crutchfield Customer Review (What's this?)

They're Focal, what more do you need to know.


Cons: The built in crossovers kind of freaked me out, but it worked out ok,,,, The instructions are in French

Need an amp and some precise tuning

Written by: Wes from Fort Worth, TX on December 1, 2011

2007 Honda Accord EX
Crutchfield Customer Review (What's this?)

I was running these off my stock HU which puts out 45w per channel (not sure if that is RMS or Max). They were quieter and less responsive than the 1oz magnet OEM panasonic Home speakers that my car came with. I was under the impression that the integration line were made to slip in the place of high end OEM speakers. They sounded more or less terible. Very distorted below 100Hz Tweets barely audible. Swapped for the JL Audio TR050-CT Tweeters and 5.5" kappa 2-ways. The JL tweets were much clearer and louder (at 8ohms none the less) and the kappas were much louder and sounded better at low Hz. Perhaps the kappas do better being 2ohm and having a built in crossover. I think these could sound good if you installed an amp, crossed them over at 80-100HZ and had the proper components in the rear to fill in the midbass. But bypassing my factory crossover, wiring, buying another amp, etc. was just not an option for me. I am returning these.

Pros: Nothing really. The tweeter mounts would be pretty cool if they fit my application

Cons: I put these in my 2007 accord v6-6speed that has the premium 180w Alpine Navigation. They were quieter than OEM and distorted in the low midrange. I have never put in a pair of aftermarkets that sound worse than OEM until now. Time for Kappa's which are proven in my book.

Hands-on research

What's in the box?

Download owner's manual

  • Two 5-1/4" Woofers
  • Two inverted dome tweeters (with 18" length of speaker wire attached)
  • 2 Surface mount tweeter housings (installed)
  • 2 Angled surface mount tweeter housings
  • 2 Woofer grilles
  • 2 Grille mounting rings
  • 2 Foam woofer gaskets
  • 8 Speed clips
  • Four 7/8" Flathead screws
  • Eight 1" Self-tapping screws
  • Owner's manual (English/ French)
  • Focal window sticker

Product Research



Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.


Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeters can be surface mounted and include two types of surface mount housings, one low profile and one angled:

  Flush Mount Low Profile Surface Mount Angled Surface Mount
Mounting Height 0.292" 0.908" 1.935"
Mounting Depth 0.511" 0.885" (screw depth) 0.8" (screw depth)
Frame Diameter 1.886" N/A N/A
Cutout Diameter 1.677" N/A N/A
Width N/A 1.887" 1.892"
Surface Depth N/A 1.887" 2.865"


Crossovers: Each woofer and each tweeter has an integrated 6 dB/octave crossover. Because the woofer and tweeter crossovers are separate, the system can be bi-amped.

Note: No crossover point frequency specifications are provided.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.