About the Focal Integration ISN 100
Precision craftmanship and advanced materials
Precision craftmanship and advanced materials
Focal's Integration ISN component speaker systems use precision craftmanship and advanced materials to deliver strong performance. And these systems include shallow-mount woofers that'll fit in the factory speaker locations in a wide range of vehicles.
Shallow-mount woofer with 2-layer cone
The ISN 100 system features a 4" woofer with a Polyglass cone that's created by depositing a layer of hollow glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose with the incredible strength of glass, for a cone that responds rapidly with extremely low resonance. A butyl rubber surround helps control cone movement and promotes high power handling. The ABS/fiberglass basket provides a non-magnetic, non-resonant housing that won't color the sound.
Unique tweeter design
Focal designed the aluminum/magnesium inverted dome tweeter to disperse high frequencies evenly for a big, open soundstage. Focal built the high- and low-pass filters into the speaker leads on the woofer and tweeter, so vocals and instruments sound natural and installation will be easier without those extra boxes to make room for.
Focal performance
We're always impressed by the sound of Focal speakers, and these components give you a great option for superior performance in vehicles that don't have a lot of room for speaker upgrades. You'll enjoy incredibly natural and realistic reproduction from this system, especially when combined with a good subwoofer. Woofer grilles are not included.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Product highlights:
- 4" component speaker system (includes 2 woofers, 2 tweeters, and hardware)
- Polyglass woofer with butyl rubber surround
- aluminum/magnesium inverted dome tweeter
- non-resonant ABS/fiberglass basket
- built-in crossovers
- 6-40 watts RMS power range (80 watts peak)
- frequency response: 80-28,000 Hz
- sensitivity: 86.26 dB
- depth: 1-13/16"
- warranty: 1 year
- MFR # ISN 100
What's in the box:
Focal Integration ISN 100 owner's manual
- Two 4" Woofers
- Two inverted dome tweeters (with attached 22" length of speaker wire and in-line crossover)
- Two 7" Woofer wires with in-line crossovers
- 2 Tweeter flush mount cups
- 2 Tweeter angle mount housings
- Tweeter removal tool
- 2 ISO connectors (for plug and play installation in certain vehicles)
- 2 Rear support brackets (for mounting the tweeters)
- 8 Speed clips
- 2 Stud bolts (for flush mounting)
- 2 Nuts for the stud bolts
- Eight 1-1/8" Self-tapping screws
- Four 3/4" Flat-head screws
- Owner's manual (English/ French)
- 2 Focal logo badges
- Focal window sticker
- Serial number card
Customer reviews for Focal Integration ISN 100
Loading...
Loading reviews...
Average review:
2.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Integration ISN 100
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Polyglass | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 86.26 | |
Sensitivity at 2.83 volts | 90.5 | |
Frequency Response | 90 - 20k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 40 | |
Peak Power Handling (Watts) | 80 | |
Top-mount Depth (Inches) | 1 11/16 | |
Bottom-mount Depth (Inches) | 1 15/16 | |
Cutout Diameter or Length (inches) | 3 5/8 | |
Mounting Height (Inches) | 0.352 | |
Frame Width | 4.026 | |
Frame Length | 4.026 |
Product Research
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Neodymium Magnets: The woofers use Neodymium magnets, which are much stronger than ceramic magnets of the same size, thus reducing the size and weight of the speaker.
Magnet Cover: The woofers have protective covers on the magnets. The measurements listed in the specifications were taken with the covers removed. The covers add approximately 1/8" to the depth and 5/8" to the magnet diameter.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at approximately 45°.
Dimensions:
Flush Mount | 45° Surface Mount | |
---|---|---|
Mounting Height | 0.3" | 1.83" |
Depth | 0.67" (1.75" including stud bolt) | 0.61" (screw depth) |
Frame Diameter | 2.05" | N/A |
Cutout Diameter | 1.82" | N/A |
Frame Width | N/A | 1.79" |
Frame Length | N/A | 2.75" |
Crossover
Crossovers: The 22" wires attached to the tweeters and the included 7" woofer wires have integrated crossovers; 6 dB/octave low-pass and 12 dB/octave high-pass. The input end of each tweeter wire has three leads, a negative and two positives. The positive leads are labeled Car and Display, with a lower output level from the Car lead (useful because the placement of the woofer in a typical car installation requires the tweeter output be lowered to maintain a balanced sound). Both ends of the woofer wires have quick-slide terminals that easily connect to the terminals on the woofer basket. Two ISO connectors are included, used for plug and play installation in certain vehicles. Because the woofer and tweeter crossovers are separate, the system can be bi-amped.
Note: No crossover point frequency specifications are provided.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...