Focal Integration ISS 690

6" x 9" component speaker system

Item #: 091ISS690

In Stock

4 Reviews | Ask Questions

Free Installation gear for most cars

Your price: $279.99 Earn up to 280 Rewards points

Add to Cart Free Shipping Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

View all associated offers




Does it fit my car?

Select your car

Find what fits your car


Audiophile-grade engineering

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration ISS 690 component system includes 6"x9" woofers with cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, so they'll play accurately with no added resonances.

Adjustable tweeter

Each separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. Focal includes a low-profile surface mount and an angled mount so you can set up the tweeter for the best possible imaging in your vehicle.

Focal ISS 690 6X9" 2 way Component Speakers

You can use this angled tweeter mount to improve high-frequency dispersion in problem vehicles.

Built-in crossover networks

The crossover networks are built-in, so you don't have those extra boxes to install. Low-profile Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers. Grilles are not included; factory grilles are appropriate for most installations.

Product Highlights:

  • component speaker system includes two 6"x9" woofers and two tweeters
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • built-in crossovers
  • 4-ohm impedance
  • 5-80 watts RMS power range (160 watts peak)
  • frequency response: 55-20,000 Hz
  • sensitivity: 93.6 dB
  • woofer top-mount depth: 3-5/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Hands-on research

What's in the box?

Download owner's manual

  • Two woofers
  • Two inverted dome tweeters (with 5" length of speaker wire attached)
  • 2 Bottom mount woofer adapters
  • 2 Surface mount tweeter housings (with tweeters installed)
  • 2 Angled surface mount tweeter housings
  • Two 19" Lengths of speaker wire with in-line tweeter crossovers
  • Two 7" Lengths of speaker wire with in-line woofer crossovers
  • 2 Woofer mounting gaskets
  • 8 Speed clips
  • Four 7/8" Flathead screws
  • Eight 2-3/8" Self-tapping screws
  • Owner's manual (English/ French)
  • Focal window sticker

Product Research



Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.

Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.

Crossovers: The included 7" woofer wires have integrated crossovers. The woofer ends of the wires have female quick-slides that easily connect to the woofer terminals.


Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeters include two types of surface mount housings, one low profile and one angled:

  Flush Mount Low Profile Surface Mount Angled Surface Mount
Mounting Height 0.3" 0.894" 1.933"
Mounting Depth 0.55" 0.875" (screw depth) 0.875" (screw depth)
Frame Diameter 1.871" 1.88" N/A
Cutout Diameter 1.67" N/A N/A
Width N/A N/A 1.895"
Surface Depth N/A N/A 2.839"

Crossovers: The included 19" tweeter wires have integrated crossovers. The tweeter ends of the wires have quick-slide terminals that easily connect to the wires soldered to the tweeters. The input end of each wire has three leads, a negative and two positives. The positive leads are labeled Car and Display, with a lower output level from the Car lead (useful because the placement of the woofer in a typical car installation requires the tweeter output be lowered to maintain a balanced sound).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Focal Integration ISS 690 Reviews

Average Customer Review:

4 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great speakers

Written By Bruce, Chs, SC on Sunday, November 16, 2014

Crutchfield Customer Review (What's this?)

Installed these in a 2014 Toyota 4Runner and they are SO much better than the stock plastic speakers

Pros: Simple install sounds great

Cons: None

Focal Integration ISS 690

Written By s.e.o., VA on Tuesday, July 29, 2014

Installed in front doors of a 2005 Toyota 4-Runner (non-JBL). Running off a Pioneer AVH-P3100DVD Head Unit (4 x 14w RMS). Still running stock rear door speakers. No amp. Had custom brackets fabricated for the 6x9 with foam rims to align with the stock foam on the door panel. Also went with inner & outer sound deadening on the front doors. These speakers are incredible, even with only 14w RMS pushing them they have incredible response down to about 50hz, really suprised how much punch they have in the 50-100hz ranges and that's just running on a head unit. Highly, highly reocmmend sound deadening and getting the tightest seal as humanly possible with the speaker enclosure in the doors, this is likely why they respond so well in lower frequencies only driven from the head unit. For lower volumes, more power is needed. I will be adding an amp soon. At low volumes, high end is weak without more power. I'll likely be adding an amp that can run at least 70w to each of these speakers. Crystal clear throughout all the spectrum and stable. Mid range is a bit "nasaly" and requires some EQ attention in the 200hz-1k range (could just be my head unit). Also tweets are very sensitive in the 16k+ range and require some EQ to eliminate pristine clarity on hi-hat riding. Again, could just be my head unit and resolve with more power to flatten out the source. Lots of data points, now just my personal opinion. These speakers ROCK. Compared them heads up to JL, Alpine ...

Pros: ... Kenwood, Pioneer coax 6x9s and these were in another league. Hertz was similar, but had no component offering in 6x9. I refused to go with a 6.5" component because the 6x9 woofer just dominates the 6.5" in mid to mid-low output. The Pros: Crystal Clear, Highly Sensitive, Runs Great with Head Unit Only (look into properly sealing w/ sound deadening), Excellent Bass, Tight Response in Mid-Lows (I was hearing kick drum precision that I didn't even know existed).

Cons: Not really a con but likely requires amplification to open up the 10k Hz+ ranges at lower volumes. Again, not really a con and is solved with EQ and amplification - mid range seems to be the power house on the woofers.

ISS 690s

Written By Josh, Saratoga Springs, ny on Thursday, February 06, 2014

Crutchfield Customer Review (What's this?)

Installed 2 pair of these speakers in my 13' ram sport with a kicker ix 1000.5 and jl stealth box. Excellent products together. Very loud and clear speakers. Very pleased

Pros: Loud, easy install, great sound

Cons: ------

Very clean and clear

Written By Hill, charleston, SC on Monday, September 02, 2013

Crutchfield Customer Review (What's this?)

Overall a great speaker. If you have a toyota with stock 6x9 speakers in the front, consider these. Whatever you do, DO NOT use the junk flat speaker adapters that Crutchfield and others try to provide. This will rob you of speaker depth, bass response, mid-bass and clarity.

It is VERY easy to re-use the stock speaker brackets of your toyota or purchase brackets that are ~1.5" in depth and are made for your car. You can either drop in 6x9 speakers (these fit with no mods to doors or anything else) or you can use a 6x9 to 6.5 adapter that will mount right on to your factory 6x9 brackets. Point is, when you're told these won't fit, or you need shallow mount speakers, don't believe it and don't do it.

Ok, that out of the way, these are indeed excellent speakers. I believe they would run fine even on an aftermarket head unit and no amp. But, a small amp would be even better. The highs are fantastic. Flat EQ, they sound great. The bass is good.

Mid-bass and mid-range is good, to a point. I found these couldn't quite handle the power and volume I was trying to play. They were 90% there, but not quite. With 200 watts and at louder volumes, the mid-range and mid-bass got a little muddy.

Also, don't believe the 6x9s don't sound good cause they are oval. Myth. If you get junk 6x9's then yes. But a quality 6x9 will sound great and compete with any 6.5" in its price range for clarity and will likely win for bass/mid-bass. 6.5 speakers only give you more options.

Pros: Crystal clear speakers, great bass, great tweeters. Would work well even with aftermarket head unit power and really will with 50 watts and up. I would put the bass of these speakers over any 6.5" in this price range, and the mid-range clarity is excellent as long as you're not trying to have a full blown heavy metal concert in your car. These are meant for factory fit replacement of your 6x9 front speaker cars and they are great for that.

Cons: Ran out of words available to me above. The only real con is for me at least is I wish they would handle a little more power. But this is only a con to me, I wanted really really loud speakers that could take up to 200 watts each. For most everyone out there these are fantastic and you won't find any faults.

Get everything you’ll need to enjoy your new Focal Integration ISS 690

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
The right tools will help keep your installation simple and clean.
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612


Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435


Add to Cart
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415


Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1


T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1


Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B



XTC 6"x9" Speaker Baffles

Protect your speakers (5" depth)

Item #: 237XT69


Add to Cart
Boom Mat 6

Boom Mat 6"x9" Speaker Baffles

Protect your speakers
Regular and slim-line sizes (Regular: 4-1/2" depth)

Item #: 696B050380


Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT


Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL


Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533


Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100


Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615


S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650


Pro.Fit Trim Panel Tool

Pro.Fit Trim Panel Tool

Remove your vehicle's trim panels without damage

Item #: 042DM4022


Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042


Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A


Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL


Add to Cart
Posi-Products™ Car Speaker Connectors

Posi-Products™ Car Speaker Connectors

8 connectors for installing car speakers

Item #: 669PP502


Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839


Add to Cart

Questions & Answers Ask the community. Share your knowledge.