Focal Performance PC 710

7"x10" 3-way car speakers

Item #: 091PC710

2 Reviews

This item is no longer available.

Original Price: $399.99 pair

Shop all 6"x9" Speakers

Does it fit my car?

Select your car

Find what fits your car

Bigger and sweeter sound

If you're looking for more than just replacement speakers, Focal's Performance Series speakers let the music speak for itself, providing transparent reproduction for all your recordings and listening pleasures. Focal's PC 710 7"x10" speakers use a lightweight, exceptionally rigid Polyglass cone in a sturdy aluminum frame to create accurate, richly-textured sound, whether played loud or soft.

These speaker are larger than conventional 6"x9" speakers, so they'll handle more power and deliver a little deeper bass. Focal includes spacers that allow installation in many 6"x9" locations, or you can use these speakers for a custom installation.

Focal PC 710

The double inverted tweeter improves the high frequency dispersion in many vehicles.

Advanced tweeter

Focal brought some of their high-fidelity technology out of the studio and into your car with the Performance inverted dome tweeters. This technology results in wider dispersion and a higher frequency response, so you'll notice greater detail in the instruments and voices. Each tweeter features an adjustable treble switch, which lets you choose your high frequency preference to a "flat" or "Hi treble" setting when you install the speakers.

Technology that sounds like magic

Focal applies molten glass microballs onto cellulose pulp to create their Polyglass cones, combining the crisp response of the rigid glass layer with the warm sound of a paper cone. The aluminum tweeter has been similarly treated with a softer, more easily damped material that makes the treble distinct without sounding harsh. You can expect superior performance from the Performance PC 710 speakers, whether you power them with a quality outboard amp or your car stereo.

Installation Note: These speakers will not fit into the 6"x9" openings in many vehicles because of their extra-large frames. Most installations will require modifications to your vehicle. Please enter your vehicle information to see if these speakers will fit.

Product Highlights:

  • 3-way 7"x10" speakers (pair)
  • Polyglass woofer with butyl rubber surround
  • processed double aluminum inverted dome tweeter
  • two sets of terminals for bi-amping the speakers
  • adjustable treble switch
  • grilles and 6"x9" spacers included
  • 4-ohm impedance
  • 5-100 watts RMS power range (200 watts peak)
  • frequency response: 50-20,000 Hz
  • sensitivity: 89.7 dB
  • top-mount depth: 3-3/4"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why replace your car's original speakers?

The speakers that originally came in your car were made from inexpensive materials, designed to create acceptable sound at the lowest possible cost to the manufacturer. If you love music, you deserve better. Name-brand aftermarket speakers deliver fuller, richer sound with considerably more detail and nuance, and they're capable of playing louder and cleaner than factory speakers. Connect new speakers to your factory radio and you'll get the best possible sound from your dealer-equipped system. Pair them up with a new car stereo for a level of enjoyment that can rival a high-fidelity home audio experience.

Focal Performance PC 710 Reviews

Average Customer Review:

2 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

So far superb!

Written By soberagainbilly, Wisconsin on Thursday, October 01, 2015

Crutchfield Customer Review (What's this?)

I was unable to install these myself, not having any cutting tools took them to a local custom shop. They were amazed at these speakers, asked me many questions. At this time they are hooked up to the stock Ford head unit which uses them as subs only. Next phase is to install a proper head unit (Pioneer Stage 4 or 3) to run them full range. Even though I have less 'power' (stock deck speakers were 2 ohm) the pitch definition is a world apart from the el cheepo stock philco subs (and I use that term losely). I listen to a mix of NIN, Metalica, Motorhead, late romantic period french organ music and Wagnerian Opera. Can hardly wait until I change and am able to run them full range! I recommend staying away from the cheaper Focal lines. Step up and purchase the upper lines, you'll have no regrets.

Pros: Worth every penny, much better low frequency overtone definition. Before there was just a fat bloated sound with no ability to make out specific pedal notes or stop changes. Now there is more than a hint. The only limiting factor is the front end. And that is only temporary.

Cons: Very large, not an easy install, expensive and no longer made/imported.

Focal 7x10

Written By Buzzy, Clear Water fl on Thursday, October 31, 2013

Crutchfield Customer Review (What's this?)

Installed new 7x10 focal in my 79 Trans am. Head unit is Pioneer -80 PRS powered by Alpine PDX-F4 Rated @ 120 wats per chanel. currently using only one chanel to drive. so far these speakers hit pretty hard with clean mids and highs. these have the capability to bi amp woofer from the mids and highs . I do plan on bi amping these. I have not had to much time to tweek these in as well as they could be because everything is new an requires tuning from each of the 3 components. I will not need to install sub with these. I did need to cut the rear deck to accept The speakers as i new i would.

Pros: Very attractive looking speaker. No need for a sub these hit hard. looking forward to pusing them to there full potential.

Cons: None so far

Hands-on research

What's in the box?

Download owner's manual

  • Two 7x10 Speakers
  • Two 6x9 Top mount adapter brackets
  • 2 Grilles
  • 2 Grille mounting rings
  • 2 Mounting gaskets
  • 8 Speed clips
  • Eight 1-3/4" Self-tapping screws
  • 8 Pieces of grille putty
  • Owner's manual (English/ French)
  • Focal window sticker

Features and Specs

Design 3-way
Tweeter Design Dual Inverted Domes
Tweeter Composition Aluminum
Woofer Composition Polyglass
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Sensitivity 92 dB at 2.83 volts
89.7 dB at 1 watt
Frequency Response 50 - 20k Hz
RMS Power Range (Watts) 5-100
Peak Power Handling (Watts) 200
Impedance (Ohms) 4
Top-mount Depth (Inches) 3 13/16
Bottom-mount Depth (Inches) N/A

Product Research


Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Voice Coil: The voice coil is wound around a 1.2" diameter low-mass Kapton former, ensuring no coil deformation.

Dual Inverted Dome Tweeters: The two tweeters are inverted aluminum domes, producing a broad sound stage. The tweeter structure is angled, so it can be pointed toward the listener. A switch allows you to change the tweeter output level (Flat or Hi Treble).

Bi-amp: The wire terminals will accept bi-amp inputs, so you can power the woofer and tweeters separately.

Mounting: Without an adapter, the PC 710 is a 7x10 speaker (not a standard size). Adapters are included to convert to a 6x9 bolt pattern and cutout, so it will fit some factory applications. Keep in mind it has a very large frame, that most factory grilles won't fit over. (It fits just over 5% of factory 6x9 locations.)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.