About the Focal Performance PC 710
Bigger and sweeter sound
Bigger and sweeter sound
If you're looking for more than just replacement speakers, Focal's Performance Series speakers let the music speak for itself, providing transparent reproduction for all your recordings and listening pleasures. Focal's PC 710 7"x10" speakers use a lightweight, exceptionally rigid Polyglass cone in a sturdy aluminum frame to create accurate, richly-textured sound, whether played loud or soft.
These speaker are larger than conventional 6"x9" speakers, so they'll handle more power and deliver a little deeper bass. Focal includes spacers that allow installation in many 6"x9" locations, or you can use these speakers for a custom installation.
The double inverted tweeter improves the high frequency dispersion in many vehicles.
Advanced tweeter
Focal brought some of their high-fidelity technology out of the studio and into your car with the Performance inverted dome tweeters. This technology results in wider dispersion and a higher frequency response, so you'll notice greater detail in the instruments and voices. Each tweeter features an adjustable treble switch, which lets you choose your high frequency preference to a "flat" or "Hi treble" setting when you install the speakers.
Technology that sounds like magic
Focal applies molten glass microballs onto cellulose pulp to create their Polyglass cones, combining the crisp response of the rigid glass layer with the warm sound of a paper cone. The aluminum tweeter has been similarly treated with a softer, more easily damped material that makes the treble distinct without sounding harsh. You can expect superior performance from the Performance PC 710 speakers, whether you power them with a quality outboard amp or your car stereo.
Installation Note: These speakers will not fit into the 6"x9" openings in many vehicles because of their extra-large frames. Most installations will require modifications to your vehicle. Please enter your vehicle information to see if these speakers will fit.
Product highlights:
- 3-way 7"x10" speakers (pair)
- Polyglass woofer with butyl rubber surround
- processed double aluminum inverted dome tweeter
- two sets of terminals for bi-amping the speakers
- adjustable treble switch
- grilles and 6"x9" spacers included
- 4-ohm impedance
- 5-100 watts RMS power range (200 watts peak)
- frequency response: 50-20,000 Hz
- sensitivity: 89.7 dB
- top-mount depth: 3-3/4"
- warranty: 1 year
- MFR # PC710
What's in the box:
Focal Performance PC 710 owner's manual
- Two 7x10 Speakers
- Two 6x9 Top mount adapter brackets
- 2 Grilles
- 2 Grille mounting rings
- 2 Mounting gaskets
- 8 Speed clips
- Eight 1-3/4" Self-tapping screws
- 8 Pieces of grille putty
- Owner's manual (English/ French)
- Focal window sticker
Customer reviews for Focal Performance PC 710
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Performance PC 710
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 3-way | |
Tweeter Design | Dual Inverted Domes | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Polyglass | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 89.7 | |
Sensitivity at 2.83 volts | 92 | |
Frequency Response | 50 - 20k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 3 13/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 1.828 | |
Frame Width | 6.967 | |
Frame Length | 10.038 |
Product Research
Features
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Voice Coil: The voice coil is wound around a 1.2" diameter low-mass Kapton former, ensuring no coil deformation.
Dual Inverted Dome Tweeters: The two tweeters are inverted aluminum domes, producing a broad sound stage. The tweeter structure is angled, so it can be pointed toward the listener. A switch allows you to change the tweeter output level (Flat or Hi Treble).
Bi-amp: The wire terminals will accept bi-amp inputs, so you can power the woofer and tweeters separately.
Mounting: Without an adapter, the PC 710 is a 7x10 speaker (not a standard size). Adapters are included to convert to a 6x9 bolt pattern and cutout, so it will fit some factory applications. Keep in mind it has a very large frame, that most factory grilles won't fit over. (It fits just over 5% of factory 6x9 locations.)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...