Chat
Contact us
Close contact box
Connect ID #
954 536 387 4
Connect ID #
954 536 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Focal PS 130 V 5-1/4" component speaker system

Item # 091PS130V

Are you looking for something more than just replacement speakers? You may want to consider Focal's Performance Series.

Find what Fits your vehicle

Remove

Checking fit...

Are you looking for something more than just replacement speakers? You may want to consider Focal's Performance Series.

3 questions - 6 answers

Item # 091PS130V

Shop all Focal Component Speakers

About the Focal PS 130 V

Alexander H.

Focal never rests

Are you looking for something more than just replacement speakers? You may want to consider Focal's Performance Series. The PS 130 V 5-1/4" component system is a fine example of Focal's obsession with exceptional sound — these Performance Series speakers feature a lightweight, exceptionally rigid Polyglass cone in a sturdy frame to create accurate, richly-textured sound, whether played loud or soft.
Focal PS 130 V

Focal never rests

Are you looking for something more than just replacement speakers? You may want to consider Focal's Performance Series. The PS 130 V 5-1/4" component system is a fine example of Focal's obsession with exceptional sound — these Performance Series speakers feature a lightweight, exceptionally rigid Polyglass cone in a sturdy frame to create accurate, richly-textured sound, whether played loud or soft.

Advanced tweeter

Focal brought some of their high-fidelity technology out of the studio and into your car. The Performance Series tweeter features inverted dome technology that offers wider dispersion and a higher frequency response, so you'll notice greater detail in the instruments and voices. Each tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage.

Cool crossover network

Superior fidelity used to involve a bulky crossover network that was hard to install. Focal designed this Performance crossover network as two separate pieces, which come joined together out of the box. If space is an issue in your vehicle, you can take them apart, then mount the high-pass crossover near the tweeter and the low-pass near the woofer, instead of having to mount one big crossover. You can also adjust the tweeter level and crossover point.

Technology that sounds like magic

Focal applies molten glass microballs onto cellulose pulp to create their Polyglass cones, combining the crisp response of the rigid glass layer with the warm sound of a paper cone. The aluminum tweeter has been similarly treated with a softer, more easily damped material that makes the treble distinct without sounding harsh. You can expect superior performance from these component speakers, whether you power them with a quality outboard amp or your car stereo.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

READ LESS

Product highlights:

  • component speaker system includes two 5-1/4" woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • separable crossover with 3-level tweeter control and 3 tweeter crossover points selector
  • 4-ohm impedance
  • 5-60 watts RMS power range (120 watts peak)
  • frequency response: 80-20,000 Hz
  • sensitivity: 90.9 dB
  • woofer top-mount depth: 2-1/4"
  • warranty: 1 year
  • MFR # PS 130V

What's in the box:

  • Two woofers
  • Two TNP inverted dome tweeters (with 19" length of speaker wire attached)
  • 2 Surface mount tweeter housings (installed)
  • 2 Angled surface mount tweeter housings
  • 2 Woofer crossovers
  • 2 Tweeter crossovers
  • 2 Woofer grilles
  • 2 Woofer grille mounting rings
  • 2 Foam woofer gaskets
  • 8 Speed clips
  • Four 7/8" Flathead screws
  • Eight 1" Self-tapping screws
  • Eight M4x25mm Machine screws (each with flat washer and lock washer attached)
  • Eight M4 Nuts
  • Owner's manual (English/ French)
  • Focal window sticker

Customer reviews for Focal PS 130 V

Loading reviews...

Average review:

4.5 out of 5 stars
31 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Focal PS 130 V

Pat M.

Features & specs

General
Speaker Size
Design 2-way
Tweeter Design Inverted Dome
Impedance (Ohms) 4
Tweeter Composition Aluminum
Woofer Composition Polyglass
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 90.9
Frequency Response 80 - 20k Hz
Minimum RMS Wattage 5
Maximum RMS Wattage 60
Peak Power Handling (Watts) 120
Top-mount Depth (Inches) 2 1/4
Bottom-mount Depth (Inches) 2 7/16
Cutout Diameter or Length (inches) 4 5/8
Mounting Height (Inches) 0.4
Frame Width 5.115
Frame Length 5.115
The Focal PS 130 V replaces these items:

Product Research

Woofer
Tweeter
Crossover

Woofer

Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.

Aluminum Basket: The woofer features a non-magnetic cast aluminum basket.

Tweeter

Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeters include two types of surface mount housings, one low profile and one angled. When flush mounted, the tweeters are pressure fit into the opening, so the cutout diameter is very important:

  Flush Mount Low Profile Surface Mount Angled Surface Mount
Mounting Height 0.282" 0.9" 1.945"
Mounting Depth 0.542" 0.875" (screw depth) 0.3" (screw depth)
Frame Diameter 1.887" N/A N/A
Cutout Diameter 1.682" N/A N/A
Width N/A 1.895" 1.920"
Surface Depth N/A 1.895" 2.875"
Crossover

Crossovers: Individual crossovers are included for each woofer and each tweeter. The crossovers can be mounted separately, docked in pairs, or all four crossovers docked together and mounted as one unit. The crossover inputs and outputs are screw terminals and will accept bare wire or spade connectors up to 0.3" wide. Because the woofer and tweeter crossovers are separate, and have separate inputs, the system can be bi-amped. The woofer crossover point is 3.5 kHz, all the crossover slopes are 6 dB/octave, and the tweeter crossovers offer two adjustments:

  • Tweeter Attenuation: set the tweeter output to -6dB, -3dB, or 0dB (no attenuation)
  • Tweeter Crossover Point: the tweeter crossovers also offer three crossover point options; 4 kHz, 4.5 kHz, and 5 kHz

Crossover Dimensions:

  • Length: 4"
  • Height: 1-1/4"
  • Width:
    • Individual: 2"
    • Pair: 4"
    • All four: 8"

Loading accessories...

Customer Q&A

3 questions already asked

Q
If one were to wire the parallel crossovers, would the load at the amp be 2 ohms for both the woofer and tweeter (per channel)?
shane  Oct 25, 2016
1 answer
A
That's an extremely interesting question, and one I have never thought about. I hope somebody answers but I hope that's not the case....
steven  Oct 26, 2016
Q
Can these tweeters be flush mounted? I don't see the mount in any of the pictures?
chris  Aug 02, 2016
4 answers
A
They can be mounted on a flat surface. You do not need to use the angle cone. They cannot be rear-mounted
harry  Aug 06, 2016
A
Yes they can. I flush mounted them in the oem holes on my 2014 Jeep JK.
eric  Aug 02, 2016
A
Yes. They pop out of the provided cups and can be flush mounted.
wp  Aug 02, 2016
A
The tweeters have 3 mounting options angle, surface, and flush mounting. The flush mounting is delicate as there are no brackets or other parts used to flush mount. The tweeter is held by the small ridges at the edge of the tweeter. Just be careful to not make the hole too big.
duncan  Aug 02, 2016
Q
I would like to run this speaker set using all circuits of a 4-channel amplifier I already own. The minimum impedance rating of the amplifier is 2ohm x4. What is the individual impedance of the tweeters/woofers of the PS130v?
eric  Apr 29, 2016
1 answer
A
You can bi-amp these components with a 4-channel amp, sure. Each woofer and tweeter comes packaged with it's own crossover for this purpose specifically. Each will present a 4 ohm load to the connected amplifier channel. So, 4 Ohms on all 4 channels. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
ryan  Apr 29, 2016 (Staff)

Loading articles...

Compare the sound