About the Focal TiS 1.5
Add some smooth highs
Add some smooth highs
Focal's TiS 1.5 tweeters use the same inverted dome design developed for their fantastic component speaker systems, delivering a rich and smooth high-frequency upgrade to your car's audio system. Paired with built-in crossovers, these stiff aluminum tweeters provide a naturally detailed sound to improve the soundstage in your vehicle. If you're not looking to change your entire speaker array, these TiS 1.5 tweeters are a great way to open up the sound and add some high-frequency excitement.
Mount them your way
You can surface- or flush-mount the speakers in your car with the included hardware. For the surface-mount option, Focal included both low-profile and angled tweeter housings depending on the shape of your dash or doors. In some cases, these tweeters may fit in the factory tweeter locations, so check the "Details" section for detailed dimensions.
Installation note: Installing tweeters can require modifications to your vehicle. These Focal tweeters are pressure-fit to the surface- and flush-mount housings, so the cutout diameter dimension is very important.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in many factory locations.
Product highlights:
- 1-1/2" aluminum inverted dome tweeters (pair)
- flush- and surface-mount hardware included
- built-in high-pass filters included (6 dB/octave)
- power handling: 2-15 watts RMS (50 watts peak power)
- frequency response: 6,000-20,000 Hz
- impedance: 4 ohms
- sensitivity: 91 dB
- flush-mount depth: 9/16"
- warranty: 1 year
- MFR # TIS 1.5
What's in the box:
- 2 Inverted dome tweeters (with 5" lengths of speaker wire attached)
- Two 19" Lengths of speaker wire with integrated crossovers
- 2 Surface mount tweeter housings (installed)
- 2 Angled surface mount tweeter housings
- Four 1" Flathead screws
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Focal TiS 1.5
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal TiS 1.5
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | 94 | |
Frequency Response | 6000 - 20k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 15 | |
Peak Power Handling (Watts) | 50 | |
Top-mount Depth (Inches) | 0 9/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 1 11/16 | |
Mounting Height (Inches) | 0.28 | |
Frame Width | 1.875 | |
Frame Length | 1.875 |
Product Research
Features
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeters can be flush mounted or surface mounted, two types of surface mount housings are included, one low profile and one angled:
Flush Mount | Low Profile Surface Mount | Angled Surface Mount | |
---|---|---|---|
Mounting Height | 0.28" | 0.892" | 1.952" |
Mounting Depth | 0.557" | 0.88" (screw depth) | 0.3" (screw depth) |
Frame Diameter | 1.875" | N/A | N/A |
Cutout Diameter | 1.674" | N/A | N/A |
Width | N/A | 1.886" | 1.885" |
Surface Depth | N/A | 1.886" | 2.845" |
Crossovers: Each wire has an in-line 6 dB/octave crossover. No crossover point frequency specifications are provided.
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...
For this price point these little beauties just elevated my system to actual enjoyability. I have a 2017 Mazda 3 Hatchback and the original dash mounted tweeters are made of cheap Mylar. In two words, they suck. Enter Focal 1.5 tweeters and happiness ensues. Thanks for a great product.
Chris from Framingham, MA