Enjoy rich, potent bass with Polk Audio's décor-friendly CSW200. This hideaway subwoofer is designed for placement in your floor or ceiling. After it's installed, all you'll see is the optional grille — a standard floor register available from your local hardware store.

This capable subwoofer gives you deep, clean bass with your movies and music. Feel the rumble of an on-screen thunderstorm, and add dramatic low-frequency punch to your favorite songs.

Polk's optional SWA500 amplifier powers the CSW200.

Free installation guides from Crutchfield
When you buy in-wall or in-ceiling speakers from Crutchfield, you'll also receive copies of our in-depth speaker and wire installation guides, free of charge.

Got wire?
Most speakers don't include any. Learn more about in-wall wiring at the Crutchfield Learning Center.
Shop our selection of in-wall speaker wire.

Product Highlights:

  • requires separate amplifier such as Polk's SWA500
  • 10" woofer
  • frequency response 28-140 Hz (-3dB)
  • Laminar Flow Port for resonance and noise-free performance
  • rigid MDF (medium-density fiberboard) enclosure
  • top and bottom speaker terminals for installation flexibility
  • mounting hardware and anti-rattle isolation pads included
  • compatible with standard 12" x 12", 10" x 10", or 8" x 14" HVAC grille; remove the grille's moving parts before installation
  • cutout: 13"W x 35-5/8"H
  • mounting depth: 9"
  • lifetime warranty

Hands-on research

What's in the box?

Download owner's manual

  • In-wall/in-ceiling subwoofer
  • 4 Metal mounting brackets
  • 3 Self-adhesive foam isolation pads
  • 16 Wood screws
  • 16 Flat washers
  • Manual
  • Online product registration sheet

Product Research

Features
Mounting Options

Features

Matched Amplifier: The CSW200 requires and is designed to only be used with the Polk SWA500 Subwoofer amplifier (107SWA500, sold separately). The SWA500 comes with a SPEX Card that configures the EQ, crossover, and power control circuitry to match the CSW200 subwoofer.

Woofer: The CSW200 features a long-throw 10" fiber cone woofer with a rubber surround.

Enclosure Construction: The CSW200 has rigidly braced MDF enclosure construction for low resonance and rattle-free performance.

Slot Vent: The enclosure feature and integrated slot vent for deep, driving bass.

Spring Posts: The CSW200 subwoofer has two sets of spring post terminals that will accept pin connectors and bare wire. There is one set on each end for convenience. When connecting the CSW200 to the SWA500 amplifier, you can only use one set of terminals - do not connect both.

Mounting Options

Mounting Location: The CSW200 is designed to be mounted between floor or ceiling joists. The CSW200 can fit between the tighter joist-spacing of QuietFloor or wooden I-Beam construction.

Mounting Brackets: The supplied brackets and wood screws allow you to mount the CSW200 to any parallel floor or ceiling joists.

Isolation Pads: When the enclosure is installed, it fits snugly against one of the floor or ceiling joists. To prevent rattling, two of the isolation pads should be installed between the enclosure and the joist, while the third isolation pad should be placed on the front panel of the enclosure.

Optional Grille: The CSW200 is designed to fire through an opening in the floor or ceiling. Once the installation is complete, the opening can be covered with an optional grille. The CSW200 is compatible with standard 12" x 12", 10" x 10", or 8" x 14" HVAC grilles.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Polk Audio CSW200 Reviews

Average Customer Review:

3 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Awesome Bass

Written By Gman, Bowie, MD on Wednesday, September 22, 2010

Crutchfield Customer Review (What's this?)

I bought this from CF a couple years ago and it is awesome. Do a little research in terms of placement. I placed mine 3 ft from front wall, and approximately 12:" from the side wall. Used a steel floor grate; finding the grate was probably the hardest part. Floor install was scary but fun. My mistake was to cut within the floor beams, you need to cut outside of the beams so that your new cut out will sit right on top of beams.

Everyone is looking for the Sub when they hear my system and all they see is open space with little in wall speakers. LOL. forget the Bose, save your cash for your 3D DVDs!

Don't skimp on the polk amp either! You are gonna NEED it, it turns on and off automatically with any system.

AWSOME

Written By David, Delmar,DE on Saturday, February 03, 2007

Crutchfield Customer Review (What's this?)

I was going for the clean room look for my home theater and this sub was a great addition. Before there had been some in-wall subs but at alot higher price. When Polk came out with this sub it fit the bill. I have it installed in floor which its alot harder to find grates to fit the needed hole size but after some searching online I prevailed. I have prewired for a second sub if needed. I'm very happy with the SWA500 amp thats made for this sub.

Really Nice Sub Option

Written By Belter, Los Angeles, CA on Tuesday, September 26, 2006

I took a chance with this Sub, and am pretty happy. I am using a MA6100 monoblock amp to push it, but I think it would have more punch with the Polk amp that has the correct phase for this sub. I had it installed in-ceiling (single story home w/attic). Most installers never heard of this sub, and are hesitant, but the installer that eventually installed it was impressed with how easy it was. All in all, this is a really great sounding subwoofer for the money, and the ease of installation, and installation flexibility makes it ever better.

Get everything you’ll need to enjoy your new Polk Audio CSW200

UL-listed speaker wire is designed to be run through walls and is building code compliant. Most speakers don't include speaker wire.
Set the volume level in your remote location without going back and forth from room to room.
A speaker selector will let you control multiple pairs of speakers from a single location.
Have your speakers installed by qualified professionals.
AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable

AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703162125

(28)

$99.99
Add to Cart
AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable

AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703164125

(7)

$159.99
Add to Cart
AudioQuest FLX-14/2 14-Gauge 2-Conductor In-Wall Speaker Cable

AudioQuest FLX-14/2 14-Gauge 2-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703142125

(51)

$129.99
Add to Cart
AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable

AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable

UL-approved for in-wall use; direct-burial rated (125 feet)

Item #: 703144125

(2)

$219.99
Add to Cart
Niles SVC100K

Niles SVC100K

Sliding stereo volume control with impedance magnification

Item #: 190SVC100K

$129.99
Add to Cart
Niles VCS100K

Niles VCS100K

Stereo volume control with impedance magnification

Item #: 190VCS100K

(5)

$99.99
Add to Cart
Russound ALTX-WIRI-2D

Russound ALTX-WIRI-2D

Electronic volume control with IR sensor and impedance magnification

Item #: 543ALTXW2D

$159.00
Add to Cart
Niles SS-4

Niles SS-4

4-pair speaker selector

Item #: 190SS4

(23)

$129.99
Add to Cart
Niles SS-6

Niles SS-6

6-pair speaker selector

Item #: 190SS6

(8)

$174.99
Add to Cart
Russound SS-4.2

Russound SS-4.2

4-pair speaker selector

Item #: 543SS42

(6)

$119.00
Add to Cart
Russound SS-6.2

Russound SS-6.2

6-pair speaker selector

Item #: 543SS62

(1)

$159.00
Add to Cart
Niles SSVC-2

Niles SSVC-2

2-pair speaker selector with volume control

Item #: 190SSVC2

(4)

$249.99
Add to Cart
Niles SSVC-4

Niles SSVC-4

4-pair speaker selector with volume control

Item #: 190SSVC4

(7)

$399.99
Add to Cart
Niles SSVC-6

Niles SSVC-6

6-pair speaker selector with volume control

Item #: 190SSVC6

(6)

$474.99
Add to Cart
Russound SDB-2.1

Russound SDB-2.1

2-pair speaker and source selector with volume control

Item #: 543SDB21

(1)

$199.00
Add to Cart
Russound SDB-4.1

Russound SDB-4.1

High-power 4-pair speaker selector with volume control

Item #: 543SDB4VC

(1)

$399.99
Add to Cart
Russound SDB-6.1

Russound SDB-6.1

High-power 6-pair speaker selector with volume control

Item #: 543SDB6VC

$499.99
Add to Cart
Niles VCS HUB8

Niles VCS HUB8

8-speaker pair connecting block

Item #: 190VCSHUB8

(6)

$79.99
Add to Cart