About the Polk db1001
Brighten up your music
Brighten up your music
Polk's db1001 tweeters make music shimmer and shine with high-frequency detail. Mount these liquid-cooled 1" silk/polymer dome tweeters in a good spot in your vehicle, and listen as they brighten up vocals, instrumentals, and percussion, bringing out musical nuances you would otherwise miss.
The in-line crossover allows only the appropriate frequencies to pass to the tweeters, while built-in protection circuitry guards against tweeter overload. You can flush- or surface-mount the tweeters with the included mounting cups.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Priced per pair
Product highlights:
- 1" liquid-cooled silk/polymer dome tweeter (pair)
- Neodymium magnet
- in-line 12 db/octave passive crossover
- electronic tweeter protection circuit
- flush- and surface-mount swivel cups
- stainless steel mounting hardware
- power range: 6-60 watts RMS (180 watts peak power)
- frequency response: 4,000-23,000 Hz
- sensitivity: 92 dB
- top-mount depth: 1"
- warranty: 1 year
- MFR # AA1101-A
What's in the box:
- 2 Tweeters (each tweeter has attached 38" speaker leads)
- 2 Flush-mount cups
- 2 Metal flush-mount clamps
- 2 Surface-mount cups
- Two 6' lengths of speaker wire with an in-line high-pass crossover (each length of wire has female quick-slides on one end and tinned wire on the other end)
- 2 Self-tapping screws
- 2 Speed clips
- Owner's Manual
- Online registration sheet
Customer reviews for Polk db1001
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Polk db1001
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk/Polymer composite | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 92 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 4000 - 23k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 1 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 2 | |
Mounting Height (Inches) | 0.364 | |
Frame Width | 2.297 | |
Frame Length | 2.297 |
Product Research
Features
Silk/Polymer Composite Tweeters: The 1" liquid-cooled, silk/polymer composite tweeters have neodymium magnets to provide clear, detailed highs.
Crossovers: The db1001 tweeters have a 4kHz, 12dB/octave in-line passive crossover with an Electronic Tweeter Protection circuit for long term reliability.
Mounting: The supplied mounting cups allow you to surface- or flush-mount the tweeters. The tweeters swivel in the flush-mount housings, allowing you to adjust them for optimum imaging.
Tweeter Mounting Dimensions:
Surface Mount | Flush Mount | |
---|---|---|
Mounting Height | 1.046" | 0.364" |
Depth | 0.825" (screw depth) | 0.938" |
Frame Diameter | 2.002" | 2.297" |
Cutout Diameter | N/A | 1.951" |
The Polk db1001 replaces these items
Polk Audio DXi 1000
- 1" liquid-cooled silk/polymer domes
- frequency response: 4,000-23,000 Hz
- 6-60 watts RMS power range
Polk db1000
- 1" silk/polymer composite domes
- flush- and surface-mount adapters, 4,000 Hz passive in-line crossovers
- 2-60 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
Great little tweeters. I added to my current system made up of 4 polk speakers driven by Kicker amp. They sound great and add that little extra to any system. Great service from Crutchfield.
Bret from Valrico, FL