The outstanding sound quality of the EX3 Series EX3560 6-1/2" component system is a testament to Polk Audio's commitment to sonic excellence. The rugged 6-1/2" poly/mica woofer cone reproduces bass and midrange with exceptional accuracy, aided by a butyl rubber surround and powder-coated, reinforced steel basket. A 1" silk dome tweeter delivers sparkling detail and superb imaging.

Optimize your soundstage by locating your tweeter in a suitable location, using the included flush-, surface-, and angle-mount adapters. If your vehicle doesn't have a good mounting location, the Elliptical Lens snaps over the tweeter in place of a grille, directing high frequencies toward your listening position. The high-quality crossover (high-/low-pass at 4,000 Hz, 12 dB per octave) sends frequencies to their proper destinations.

Details:
  • poly-mica woofer cone with butyl rubber surround
  • 1" silk dome tweeter
  • 2-way crossover (high-/low-pass at 4,000 Hz, 12 dB per octave)
  • frequency response 50-22,000 Hz
  • power range 10-100 watts RMS
  • peak power handling 300 watts
  • sensitivity 92 dB
  • top-mount depth 2-5/16"
  • 1-year warranty

Why install component speakers?

A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.

Hands-on research

What's in the box?

Download owner's manual

  • 2 Woofers
  • 2 Grilles
  • 2 Grille frames
  • 2 Tweeters installed in flush mount cups (each tweeter has an Elliptical Lens and a 23" length of speaker wire attached)
  • 2 Flush mount cup clamps
  • 2 Surface mount cups
  • 2 Angled surface mount cups
  • 2 Tweeter grilles
  • 2 Crossovers
  • 2 Self-adhesive foam gaskets
  • Two 10' lengths of speaker wire (each length of speaker wire has bare wire on one end and female quick-slides on the other end)
  • 8 Speed clips
  • 8 Speed nuts
  • Eight 1" self-tapping screws
  • Eight 3/4" self-tapping screws
  • 2 Machine screws
  • Owner's Manual
  • Product Registration Card
  • On-line registration sheet
  • Mounting Template

Product Research

Woofers
Tweeters
Crossovers

Woofers

Woofer Cone Material: The moisture-resistant mica-filled polymer composite woofer cones produce full, accurate midbass.

Surrounds: The durable butyl rubber surrounds increase speaker life and improve bass response.

Tweeters

Tweeter Dome Material: Each 1" tweeter is made with a silk dome that offers smooth, clear high frequency response.

Elliptical Lens: Each tweeter employs an Elliptical Lens that allows you to focus the high frequencies for pinpoint imaging and clear detail, even from off-axis factory speaker locations. Note: The Elliptical Lenses do not rotate. Instead, they must be aimed before installation.

Tweeter Mounting Options: The tweeters may be surface, angled surface, or flush mounted. They must be installed using one of the three housings.

  Flush Mount Surface Mount Angled Surface Mount 
Mounting Depth 1.015" 0.609" (screw depth) 0.609" (screw depth)
Mounting Height 0.47" 1.088" 1.077"
Cutout Diameter 1.851" NA NA
Frame Diameter 2.209" 2.036" 2.097"

Crossovers

Crossover Dimensions: L=4.708", W=2.714", H=1.419"

2-Way Crossovers: The crossovers feature a 12dB/octave, 4kHz high-pass network for the tweeters and a 12dB/octave, 4kHz low-pass network for the woofers.

Input/Output Connections: The crossover inputs and outputs are gold-plated screw terminals.

Mounting: There are two mounting holes in the base of each crossover.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Be the first to review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Get everything you’ll need to enjoy your new Polk EX3560

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
Keep your speakers clean and dry. They compress to fit behind your speakers.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415

(46)

$26.99
Add to Cart
XTC 6-1/2

XTC 6-1/2" Speaker Baffles

Protect your speakers (3-1/4" depth)

Item #: 237XT65

(157)

S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615

(12)