Polk Audio LCi-C

In-wall center channel speaker

  • Polk Audio LCi-C


  • Polk Audio LCi-C


Item #: 107LCIC

Review Summary

This item is no longer available to purchase.
Contact us for other options
Call   Email  
Original price $559.99
We recommend this similar item, or shop all In-wall Speakers

Our take on the Polk Audio LCi-C

by Amanda P.
Polk Audio

Polk's LCi-C anchors dialogue to your screen with crystal-clear accuracy. This in-wall center channel speaker takes advantage of the same sophisticated technologies that have made Polk's critically acclaimed LSi loudspeakers so successful. And since it installs directly into your wall, you get clean, high-impact sound without any room clutter whatsoever.

High-performance design
This speaker owes its impressive performance to a sturdy build and careful design. Polk's high-quality construction keeps the speaker's drivers in rigid alignment, and virtually eliminates sound-muddying resonance. An advanced tweeter delivers smooth, extended highs with impressive detail. It's swivel-mounted, so you can direct the sound toward your favorite listening position. And Polk engineered the woofers to provide clear, precise midrange and bass, as well as even sound coverage throughout the room.

Read more

An optional in-wall bracket is recommended for installing the LCi-C in-wall center channel speaker in a home with new construction.

Create a hidden home theater with the LCi-C and other LC in-wall speakers, plus a CSW in-wall or in-floor subwoofer. You can also can also combine the LCi-C with LSi free-standing speakers.

Free installation help from Crutchfield
When you buy in-wall or in-ceiling speakers from Crutchfield, you'll also receive copies of our in-depth speaker and wire installation guides, free of charge:

Click the links above to view these guides; you'll need the Adobe Acrobat PDF reader (free download).


  • frequency response 45-26,000 Hz (-3dB)
  • 1" swivel-mount Ring Radiator tweeter
  • dual 5-1/4" Dynamic Balance® woofers
  • handles up to 150 watts
  • sensitivity 91 dB
  • 4-ohm impedance
  • tweeter level switch
  • paintable white matte grilles
  • cutout: 13-1/8"W x 7-5/8"H
  • mounting depth: 3-1/2"
  • lifetime warranty

Priced each

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Enclosure Type In-wall
Video Shielded No
Tweeter Ring Radiator
Midrange Size 5.25
Woofer Size 5.25
Woofer Composition Polypropylene
Woofer Surround Rubber
Power Range (Watts) 10-150
Sensitivity 91 dB
Impedance (Ohms) 4
Frequency Response 45-26kHz
Connector Type Spring posts
Bi-Amp Inputs No
Parts Warranty Lifetime
Labor Warranty Lifetime
Product Research
What's in the box?

Download owner's manual

  • In-wall 2-way center channel speaker
  • White aluminum grille (paintable)
  • Cardboard template
  • Plastic paint mask
  • Owner's Manual (English / Portuguese / German / Italian / Spanish / French)
  • On-line registration card

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Mounting Options


Dynamic Balance Technology: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion.

Dual Midranges: The speaker has dual 5-1/4" Dynamic Balance, aerated polypropylene midrange drivers for clean, distortion-free midrange. The midrange drivers use rubber surrounds.

Cascade Tapered Array: The midranges are aligned in a Cascade Tapered Array, in which one driver plays only bass frequencies, and the other bass and midrange, for broad, even sound coverage for off-axis listeners.

Tweeter: The speaker uses a 1" Ring Radiator tweeter for crisp, transparent highs. The ultra-light woven Ring Radiator Diaphragm delivers flat response, precise detail and overall accuracy. A High Frequency Waveguide prevents phase cancellations for smooth, uniform frequency response and wide dispersion. A Low Frequency Waveguide promotes laminar airflow between chambers to prevent air turbulence. This feature serves the same function as Power Port for Polk's bass systems. The ball-and-socket swivel mount lets you aim the tweeter in any direction to give you direct high-frequency control, resulting in excellent imaging even for off-axis listening positions.

Infinite Baffle Tuning: Infinite Baffle Tuning uses the virtual enclosure of in-wall space for superior bass response.

Timbre-matched: The speaker is timbre-matched to the Polk Audio LCi Series for seamless, enveloping imaging when used in a home theater system. You can mix and match any of the LCi-series in-wall and in-ceiling speakers with the LCi Series high performance floor-standing and bookshelf speakers.

Terminals: The speaker features gold-plated spring post terminals.

Wiring Recommendations: The gauge of the speaker wire used to connect this speaker depends upon the length of the run:

  • Lengths of up to 25': 18 or 16 gauge
  • Lengths between 25' to 50': 16 or 14 gauge
  • Lengths between 50' and 75': 14 or 12 gauge
  • Lengths of over 75': 12 gauge


Tweeter Attenuator: If the listening room is very reflective, with smooth sheetrock walls, hardwood floors, and non-cushioned furniture, the sound will overly "bright" and unnatural. In this case, you can engage the LCi -3 dB Tweeter Attenuator (select the "Cut" setting) to flatten the room response without hindering higher frequency response for warmer, more realistic sound and more accurate imaging. The Tweeter Attenuator control is located on the speaker's front panel.

Mounting Options

Installation: The speaker requires a cutout 13-1/8" wide and 7-5/8" high with a depth of 3-1/2" assuming 1/2" drywall. Once the hole is cut, the speaker can be dropped in and the Rotating Cams can be tightened, allowing you to secure the speaker to the drywall without any extra assembly. If you will not be mounting the speaker in drywall, make sure the wall or ceiling material can safely support the weight of the speaker before installation; the speaker weighs approximately 8-1/2 pounds.

Paintable: The grille and flange can be painted, allowing the speaker to match any décor. A clear plastic paint mask is included to protect the "unpaintable" speaker parts.


Frequency Response:

  • Overall: 30 Hz-27 kHz
  • +/-3 dB Limit: 45 Hz-26 kHz
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Polk Audio LCi-C Reviews

Average Customer Review:

2 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

An outstanding center channel speaker

Written By John, Westminster, MD on Thursday, March 19, 2009
Crutchfield Customer Review (What's this?)
Superb fidelity and unobtrusive footprint. I'm really happy with this one.
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
5 out of 5

The BEST center channel speaker I've ever heard

Written By Michael, Orange County, CA on Monday, June 09, 2008
Although pricey, this is a speaker that is well worth the money, it will tie
together all your dialogue on a surround sound system. Don't cut corners
on your speakers, spend the money up front and they will reward you for
years to come.
31 out of 34 people found this helpful
Was this review helpful?    Yes | No

Add accessories for the Polk Audio LCi-C

UL-listed speaker wire is designed to be run through walls and is building code compliant. See all categories & accessories

AudioQuest FLX-16/2 16-Gauge 2-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
28 people say
Your Price: $99.99
Add to Cart
AudioQuest FLX-14/2 14-Gauge 2-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
51 people say
Your Price: $129.99
Add to Cart
AudioQuest FLX-16/4 16-Gauge 4-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
7 people say
Your Price: $159.99
Add to Cart
AudioQuest FLX-14/4 14-Gauge 4-Conductor In-Wall Speaker Cable UL-approved for in-wall use; direct-burial rated (125 feet)
2 people say
Your Price: $219.99
Add to Cart
Russound Flexbox For in-wall speakers
Your Price: $199.99
Add to Cart
Polk Audio PB LCi-C Pre-construction bracket for select Polk in-wall center channel speakers
7 people say
Your Price: $17.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

For a more in-depth review and enhanced detailed information on the Polk Audio LCi-C, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_107LCIC/Polk-Audio-LCi-C.html ).