Polk Audio LSi M 702 f/x

Surround speakers

  • Polk Audio LSi M 702 f/x


  • Polk Audio LSi M 702 f/x

    Shown with grilles off


Our take on the Polk Audio LSi M 702 f/x

by Kristen Schaub
Polk Audio

Realistic, wraparound special effects for movie night

Any movie fan will tell you that surround speakers are an integral part of recreating the movie theater experience in your home. Polk's LSi M 702 f/x speakers were designed just for that purpose. Building upon the widely acclaimed LSi family of speakers, the new LSi M series incorporates the latest developments in speaker technology. The '702 f/x speakers excel at delivering the kind of wide, deep rear soundstage that puts you in the action. You'll also notice realistic details like the zing of bullets rushing past or the rustle of leaves.

Polk's Dynamic Sonic Engine: The speaker within a speaker

Dynamic Sonic Engine

An exploded view of Polk's Dynamic Sonic Engine with a tightly spaced tweeter and midrange.

Like the larger, floor-standing LSi M models, these surround speakers each feature Polk's Dynamic Sonic Engine. Made up of a 3-1/4" midrange driver and a 1" ring radiator tweeter in its own acoustically sealed enclosure, this tightly spaced duo acts like a "mini-monitor." The precise alignment of the midrange and tweeter allows them to disperse sound over a wide, uniform area with excellent off-axis response in the critical 200 Hz to 2,000 Hz midrange.

The ring radiator tweeter features several improvements from the version in the earlier LSi line. A slight reshaping of the tweeter's bullet-shaped phase plug allows it to move even farther out of the baffle, while a redesigned diaphragm has made the tweeter even more efficient. It even has its own tuned enclosure within the Dynamic Sonic Engine. These changes result in higher power handling, extended dynamic range, improved dispersion, and extended high-frequency response — all the way up to 30,000 Hz!

Advanced driver material for even more realistic sound

The original LSi speakers featured a light, stiff mineral-filled polypropylene cone that was "puffed up" with injected air to form a honeycomb-like structure. The new super cell aerated polypropylene uses larger "puffed cells" to create a cone material that's thicker yet lighter than the original. It's used in both the midrange and woofer, allowing them to move faster and with more efficiency. This speaker also uses proprietary Orth Crossovers to send the right frequencies to the right drivers, making it extremely efficient and easier for your receiver or amplifier to drive.

PowerPort technology for smooth, deep bass

Like all LSi M speakers, the 6-1/2" woofer in each of the '702 f/x speakers has its own PowerPort®. Designed exclusively by Polk, this specially designed "cone" at the mouth of the bass port directs moving air to eliminate bass-stealing turbulence. No turbulence means no wasted power, which means more efficient bass response.

Grilles off

Read more

Solid cabinet design for versatile placement

The '702 f/x cabinets are made of heavily braced 3/4" thick MDF with even thicker front baffles (1-1/4") to keep sound-coloring resonances to a minimum. The magnetic grilles easily snap on and off, and they measure less than 1mm thick, so they won't interfere with the sound. A wall distance switch on the back of each speaker ensures you get the best possible bass performance without any "boominess," whether you place them on tables in the corners of your room or mount them on your walls.

Achieve startling realism and seamless surround effects when you build a complete LSi M system. All LSi M models feature the same components and tuning, so you can use the LSi M 702 f/x surround speakers in the back of your room with either the bookshelf or floor-standing speakers in the front of your room for high-performance sound, with a matching center channel speaker for crisp dialogue.

LSi M Line up

Create a stunning LSi M system with an LSi M center channel speaker, and bookshelf speakers or tower speakers.

Got wire?

Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.


  • frequency response 55-30,000 Hz (-3dB)
  • handles 20-200 watts
  • sensitivity 88 dB
  • 8-ohm impedance
  • 1" ring radiator tweeter
  • 3-1/4" super cell aerated polypropylene midrange
  • 6-1/2" super cell aerated polypropylene woofer
  • PowerPort® technology (for the woofer only) improves bass response
  • wall distance switch maximizes bass performance for more placement options
  • keyhole slots for wall mounting (stud-mounting recommended)
  • 5-way gold-plated binding posts
  • gloss black finish
  • 19-15/16"W x 16-5/16"H x 6-13/16"D
  • weight: 28.9 lbs. (each)
  • warranty: 5 years
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Enclosure Sealed/Ported
Bipole or Dipole No
Tweeter Ring radiator
Midrange size (inches) 3-1/4
Woofer size (inches) 6-1/2
Connector Type Post
Power Range 20-200
Sensitivity 88 dB
Impedance (Ohms) 8
Frequency Response 55-30k Hz
Height (inches) ---
Width (inches) ---
Depth (inches) ---
Weight (pounds) ---
Mounting Bracket Included Keyhole
Parts Warranty 5 Years
Labor Warranty 5 Years
Product Research
What's in the box?

Download owner's manual

  • 2 Surround loudspeakers (black)
  • 2 Magnetic grilles (black)
  • 8 Self-adhesive rubber bumpers
  • 8 Self-adhesive felt pads
  • Template
  • Owner's Manual CD-ROM
  • Quick Start Guide
  • "Read First" note
  • Thank You letter

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Driver Technology
Enclosure Design
Mounting Options

Driver Technology

Performance Objectives of the Polk Audio LSiM Series Loudspeakers: The LSiM series loudspeakers are Polk Audio's best high-performance loudspeaker. Polk Audio designed the LSiM series loudspeakers to create a sound that virtually transports you to the scene of the recorded performance. It was engineered & created with the following performance objectives in mind.

  • Pleasing tonality, even during extended listening at performance levels.
  • Crisp, lifelike impulses, transients & coherent detail without any unnatural ringing or decay.
  • Natural reproduction of complex low frequency instruments & special effects.
  • Uniform sonic representation within the listening area & immersive spatial impression.
  • Reproduce concert/theater levels while maintaining linearity and accuracy.
  • Compatibility with a wide array of electronics both past, present & future.
  • Work as promised for many years of enjoyment (5 year parts & labor warranty).

Dynamic Balance: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response, & low distortion.

3-Way Driver System: The Polk Audio LSiM series surround loudspeakers employ a 3-way driver system for crisp, detailed highs; natural, lifelike midrange; and accurate, dynamic midbass. The surround loudspeakers house a 1" (diameter) Dynamic Balance Enhanced Ring Radiator Tweeter, a 3.25" (diameter) Dynamic Balance Super Cell Aerated Polypropylene cone midrange driver, & a 6.5" (diameter) Dynamic Balance Super Cell Aerated Polypropylene cone midbass woofer.

Enhanced Ring Radiator Tweeter: The ring radiator tweeter was a vital element in the success of Polk Audio's original LSi Series. Polk Audio engineers have made some nuanced improvements in the design of this tweeter. First, they reshaped the tweeter's bullet-shaped phase plug, allowing it to move farther out of the baffle, improving dispersion and eliminating horn-loading. Next, they opened up the tweeter's face-plate, then redesigned the tweeter's diaphragm roll to make it more efficient and improve dispersion even more. Finally, they gave the new ring radiator tweeter its own tuned enclosure (Dynamic Sonic Engine). This new ring radiator tweeter boasts higher power handling, extended dynamic range, improved dispersion and extended top-end response.

Super Cell Aerated Polypropylene (APP) Cone Woofer: If the perfect cone material is lightweight (for faster, more efficient action) and stiff (for less distortion-causing flex), with enough internal damping to suppress and offset any limitations of its lightweight stiffness, then the Super Cell APP Cone Material is about as perfect as cone material gets. Aerated Polypropylene (APP) is a mineral-filled polypropylene material that's been "puffed up" with injected air to form a honey-comb structure. Polk Audio's original APP cone approached the ideal balance of lightweight stiffness with high damping, along with good resistance to moisture, UV and temperature extremes. Next generation LSiM series loudspeakers employ Polk Audio's next generation of APP Super Cell. In Super Cell APP, the "puffed cells" are larger, for a thicker cone material that actually has less mass than the original APP material. Super Cell APP has larger cells, for lighter weight and more inherent damping, plus uncompromised stiffness, for unsurpassed transient response and resonance suppression.

Butyl Rubber Surrounds: Durable, soft, injection-molded butyl rubber surrounds are tuned to absorb and suppress unwanted cone resonances. Polk Audio's butyl rubber material is impervious to UV, extreme temps & humidity, for a lifetime of smooth, reliable sound.

Extended Linear Motion Voice Coils: Allowing lots of movement in a limited space, ELM Voice Coils power the LSiM series speaker's mid-range & mid-woofer drivers to extend their higher-frequency response with much less impedance.

Cast Aluminum Baskets: These lightweight, cast aluminum baskets provide a rigid structure for precise alignment of the speaker's active parts, for flat response & low distortion, with no mechanical resonances or ringing. The open design provides ample venting for unobstructed linear movement.

Orth Crossovers: The Polk Audio LSiM series surround speakers employ proprietary engineering, designed and patented by Polk Audio to maintain a lower order crossover design & increase power handling. Orth Crossovers feature Mylar/polypropylene capacitors for sparkling highs & Air Core Inductors for superior transparency. Notch Filters and sophisticated Zobel circuits smooth the impedance curve of the system for more efficiency & better high frequency response.

  • Tweeter/Midrange Crossover: 2.4 kHz 18 dB/oct
  • Midrange/Midbass Crossover: 240 Hz 12 dB/oct

Timbre-Match Series: You can achieve incredible realism & seamless surround effects when you build a complete Polk Audio LSiM series speaker system. All LSiM series speaker models feature the same components & tuning for perfect timbre-matching.

Frequency Response Note: The overall frequency response is 45Hz to 40kHz & the -3dB frequency response is 55Hz to 30kHz.

Enclosure Design

High-Gloss Black Wood Veneer: The Polk Audio LSiM loudspeakers are finished in a high-gloss black, furniture-grade wood veneer.

MDF Enclosure: The enclosure is an integral part of the sound design of the Polk Audio LSiM series loudspeakers. All LSiM cabinets are made of .75" MDF, with wide-radius baffles of robust 1.25" MDF. Substantial internal bracing (each driver has its own separate non-parallel chamber) increases efficiency and banishes internal resonances & standing waves, for high power handling and incredible smoothness. Wide-radius baffles, along with zero-diffraction magnetic grilles, help stabilize imaging for a very wide, well-defined soundstage.

Dynamic Sonic Engine (DSE): At the heart of the Polk Audio LSiM series surround loudspeakers is an enclosure-within-the-enclosure design (known as the Dynamic Sonic Engine) that houses the mid-range driver & the ring radiator tweeter. Molded into one rigid piece, the DSE enclosure tapers to a "turbine" that reduces back-wave reflections. The DSE combines its two speakers in an aligned, optimized array for wide, uniform dispersion in the critical 200Hz-2kHz midrange, improving transient response. The combination delivers exact timbre-matching, improved high-frequency dispersion and greater horizontal off-axis response.

Note: The ring radiator tweeter & midrange driver are housed in a separate internal sealed enclosure from the ported enclosure which houses the midbass woofer.

PowerPort Bass Venting: PowerPort Bass Venting is a Patented Polk Audio technology that uses a specially designed "cone" at the mouth of the bass port to direct moving air as it exits the port. Air moving out of a bass port creates turbulence, which can result in boomy distortion & "port noise", especially at high volume. This distortion can cause bass output losses up to 3dB, wasting lots of amp power. To eliminate bass-stealing turbulence at the mouth of the port, Polk Audio engineers designed the PowerPort. It's unique shape promotes "laminar" airflow even in short tube ports by mimicking the properties of longer, flared port openings. No turbulence means no wasted power, which means more efficient bass response.

Zero-Diffraction Magnetic Grille: The super thin (1mm), zero-diffraction grille has no measurable effect on the speaker's response. Completely unobtrusive, stylishly sheer; the grille locks into place magnetically.


Gold-Plated Binding Posts: Each surround loudspeaker has one set of gold-plated binding posts. The binding posts will accept bare wire (16-12 AWG), pin connectors, spade connectors, & banana plugs (single only).

Color-Coded: The surround speakers' binding posts are color-coded (red/black) for easy identification between positive & negative.

Mounting Options

Keyhole Slots for Wall-Mounting: The LSiM series surround loudspeakers have built-in dual keyhole slots for wall mounting (stud-mounting recommended). The dual keyhole slots are spaced 12" apart (a mounting template is provided). The surround loudspeakers can be hung either on side walls or rear walls. The loudspeakers should be mounted 6-8' off the floor. If you're setting up a 7.1 system, mount the Surround Back Left & Surround Back Right loudspeakers at the same height as the Surround Left & Surround Right loudspeakers.

Note: The LSiM series surround loudspeakers should be oriented so that the Dynamic Sonic Engine (3 1/4" mid-range / 1" Ring Radiator tweeter) points toward your listening area. Therefore, the surround loudspeaker that would serve as the right surround on a sidewall will become the left surround on a rear wall.

Wall Distance Switch: The LSiM series surround loudspeakers feature a wall distance switch located on the baffle underneath the grille. If position limitations demand that the surround loudspeakers be mounted closer than 2' from side walls or ceiling, the proximity of the surface can result in a response "bump" between 50 & 200Hz. This can cause the loudspeakers to sound "boomy". The wall distance switch flattens the response & eliminates "boominess" without sacrificing deep bass response for more lifelike sound. Set the switch accordingly to <2' or >2'.


Product reviews from the Crutchfield Labs (what are the Labs?)

Anatomy of Polk LSi M Speakers

Anatomy of Polk LSi M Speakers

by Dave Bar
Anatomy of Polk LSi M Speakers

We dissect the Polk Audio LSi M 705 floor-standing speaker to find out what makes it sound good.

Be the first to review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Add accessories for the Polk Audio LSi M 702 f/x

You'll need speaker wire to connect your surround speakers to your amp or receiver. No wire is included with this speaker. See all categories & accessories

Original Monster Cable With gold pin connectors (15-foot pair)
36 people say
Your Price: $39.99
Add to Cart
Monster Cable SuperFlat™ Mini Decor-friendly speaker cable with gold pin connectors (50-foot spool)
25 people say
Your Price: $34.95
Add to Cart
AudioQuest X2 Speaker Cable 14-gauge cable, connectors optional (30 feet, Gray)
25 people say
Your Price: $58.99
Add to Cart
AudioQuest G2 Speaker Cable 16-gauge cable, connectors optional (30 feet, Gray)
19 people say
Your Price: $38.99
Add to Cart
Monster XPHP™ MKII Speaker cable with clear jacket (100 feet)
8 people say
Your Price: $99.95
Add to Cart
Monster XP® Speaker cable with clear jacket, connectors optional (100 feet)
50 people say
Your Price: $64.95
Add to Cart
Monster XP® Navajo White MkII Speaker cable (50 feet)
2 people say
Your Price: $39.95
Add to Cart
64 people say
Your Price: $19.95
Add to Cart
10 people say
Your Price: $11.95
Add to Cart
4 people say
Your Price: $15.95
Add to Cart
9 people say
Your Price: $13.95
Add to Cart
Monster XP Mini Twist-on Pin Connectors 4 pair, 16-gauge (4 pair)
14 people say
Your Price: $11.95
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

For a more in-depth review and enhanced detailed information on the Polk Audio LSi M 702 f/x, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_107LS702FX/Polk-Audio-LSi-M-702-f-x.html ).

Find the gear that's right for you
Ask an expert
Your Crutchfield Advisor knows the gear inside and out.
Call 1.888.955.6000
Ask an expert

Compare with other Polk Audio models

  • Polk Audio FXi A6
  • More powerful surround effects
  • 4.5 out of 5: In Stock
  • The Polk Audio FXi A6 offers the same flexible design as the FXi A4, and sports a 6-1/2" woofer for frequency response down to 55 Hz.
  • Add To Cart
  • Polk Audio FXi A4
  • Surround Speakers
  • 5 out of 5: In Stock
    • The Polk Audio FXi A4 offers:
      • bass-reflex (ported) design
      • dipole/bipole switch
      • Dynamic Balance® drivers
  • Add To Cart
  • Polk Audio LSi M 702 f/x
  • Even more realistic sound
  • In Stock
  • The Polk Audio LSi M 702 f/x
    • has a 1" ring radiator tweeter, a 3-1/4" midrange, and a 6-1/2" woofer in each speaker
    • features Polk's PowerPort® technology for improved bass response
    • covers a frequency range from 55 to 30,000 Hz
    • handles up to 200 watts
    • has dual binding posts for bi-wiring or bi-amping
    • does not have a dipole/bipole switch
  • Add To Cart
  • Polk Audio FXi A6
  • Surround Speakers
  • 4.5 out of 5: In Stock
    • The Polk Audio FXi A6 offers:
      • bass-reflex (ported) design
      • dipole/bipole switch
      • Dynamic Balance® drivers
  • Add To Cart
  • Polk Audio LSi M 702 f/x
  • Gloss Black Surround
  • In Stock
    • The Polk Audio LSi M 702 f/x offers:
      • three-way design including a 1" ring radiator tweeter, 3-1/4" midrange, and 6-1/2" woofer
      • frequency response 55-30,000 Hz
      • wall distance switch maximizes bass performance for more placement options
  • Add To Cart
You are here