Polk Audio's Mobile Monitor Series subwoofers bring out superior performance from lighter materials, so you'll get the impact you want without the extra weight of a conventional system. Advanced engineering and optimized components reproduce your sound with uncompromising accuracy, for low end that is rich and clear.

The MM1240D 12" dual voice coil subwoofer handles up to 425 watts RMS. A copper voice coil and neodymium magnet motor drives the polymer cone with exceptional efficiency. The carbon composite basket features a "wagon wheel" design that resists flexing during heavy excursion, so your sub hits sub hits solidly without distorting. The dual 4-ohm voice coils offer options for wiring a multi-sub system or drawing maximum power from your mono amplifier.

This sub is certified for marine use, and Polk includes corrosion-resistant stainless steel mounting hardware.


Priced per speaker

Product Highlights:

  • 12" subwoofer with dual 4-ohm voice coils
  • polymer cone with butyl rubber surround
  • carbon composite basket
  • certified for marine use
  • optional matching grille complements the basket design
  • power range: 100-425 watts RMS (212 watts RMS per coil)
  • peak power handling: 800 watts
  • frequency response: 27-200 Hz
  • sensitivity: 88 dB
  • top-mount depth: 4-11/16"
  • sealed box volume: 0.88 cubic feet
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's a component sub and why would I want one?

A component sub is simply a speaker that's designed to reproduce bass once it's installed in a compatible enclosure. Think about the impact of a movie soundtrack in a big theater or even in your own home HDTV setup. A component sub can add the same kind of power to the music in your car. And a car sub is not all about the boom that you hear on a street corner (although that's cool too) - you can pair a component sub with your choice of enclosure to get bass just the way you like it, from tight and punchy to fat and loose. And once you experience music in your car with a well-tuned subwoofer, you'll never go back.

Hands-on research

What's in the box?

Download owner's manual

  • 12" Dual 4-ohm voice coil subwoofer
  • Foam gasket
  • 8 Mounting screws
  • 8 Speed-clips
  • Owner's Manual
  • Product Registration Information sheet

Product Research

Features
Enclosure Compatibility

Features

Klippel Optimized: Using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer's motor structure, voice coil alignment and suspension for the best possible performance, even at extreme listening levels.

Polymer Woofer Cone with Butyl Rubber Surrounds: The Polymer Woofer Cones and Butyl Rubber Surrounds will not break down over time and will survive the rigors of harsh automotive environments.

High Temperature Copper Voice Coil (50mm) and Polyamide Former: High Temperature 50mm Copper Voice Coil and Polyamide Former withstand the most rigorous use while maintaining extremely low distortion for bass punch and output.

Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils that offer wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2-ohm load. When wired in series, the woofer presents an 8-ohm load.

Carbon Composite Basket: The woofer's carbon composite basket is lightweight and will not flex during music audio peaks.

Nickel Plated Heavy Duty Input Terminals: Nickel plated heavy duty input spring-post terminals accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.

Preconditioning Period: Mobile Monitor subwoofers will achieve even greater performance once they are thoroughly broken in. To break in your new MM subwoofer, play 20 to 30 hours of music at moderate levels.

Marine Certified Woofer: Polk MM Series speakers are built to withstand exposure to moisture and UV rays, so they work well in boats and cars. They also include stainless mounting hardware for corrosion and rust resistance.

Enclosure Compatibility

Recommended Sealed Box Volume: Polk recommends mounting this woofer in a sealed enclosure made out of 3/4" MDF with an internal volume of 0.88 cu/ft.

Recommended Ported Box Volume: Polk recommends a ported enclosure made out of 3/4" MDF with an ideal internal volume of 1.58 cu/ft using a slot port measuring 13.5" wide x 1.5" tall x 18.5" deep.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Polk Audio MM1240D Reviews

Average Customer Review:

5 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great Sub

Written By K N, Cincinnati, OH on Saturday, June 15, 2013

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

Packs a lot of punch. Still need to tweek, but so far very tight sounding.

Pros: Well built

Polk 1240 DVC

Written By Nathan, Minot, ND on Sunday, December 16, 2012

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

If you are on the market for a subwoofer that plays flawlessly in all fields then look no further! I installed two of these in my 2007 impala paired with the Polk PA 1200.1, words cannot describe how these things can preform! They literally rattled my rear view mirror off the windshield! The sound quality of these subwoofers is absolutely superb, I have owned and heard many other brands but none of them have came even close to Polk as far as price and quality. Before you buy you need to make sure that the box you are using is exactly the size that polk recommends on their website, I have made this mistake and sacrificed a lot of sound quality. Also, please be prepared these subwoofers are very power hungry i was feeding them nearly 600 watts each, that being said look into a dry cell battery or a higher output alternator because you will need it if you plan on using more then one of these! The bottom line, you cannot go wrong with this product!

Pros: Loud, very good sound quality, hits very good lows

Cons: Very power hungry

Stop looking now, and buy the Polk Audio MM1240D!!!!

Written By KennyE, Stapleton, NE on Tuesday, June 05, 2012

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I spent 17 years in audio electronics retail in my younger years and have heard and installed hundreds of different subs over that time. I purchased the Polk Audio MM1240D for my daughter's Blazer. She wanted subs but didn't want the cargo area cluttered with a large enclosure. I've used RF, Kenwood and JL drivers in the past, but couldn't find a 12" sub that would work in a small sealed box that fit the budget. After doing a LOT of research, I decided to try the Polk. I am familiar with the brand, but never have I owned or sold it. Recomended enclosure size is .88 cu/ft, which worked great in the custom fiberglass enclosure I built for the passenger rear corner of the cargo area. I purchased a Kenwood KAC-8105 digital mono amplifier to drive the single sub. Rated power handling for the Polk is just under 400w/rms and the Kenwood amp is rated @ 400w/rms into a 2 ohm load. Wired the dual, 4 ohm voice coils in parallel for a 2 ohm load, perfect match to the amp. Once I completed construction of the enclosure and had everything installed, the sound quality REALLY impressed me. It has a long excursion which allows it to operate well in the sealed box. Bass was hard and tight with 80's rock and country music that I prefer, but also handled the mind numbing hip hop and rap crap my daughter listens to. Two of these with a pair of these amps would be unreal! Crutchfield offers this at a discounted price which makes it a bargain. I would recommend this to anyone.

Pros: No-nonsense design, no huge plastic crap around a tiny magnet structure like so many manufacturers have today, quality wire terminals and comes with a substantial gasket to seal to the box. SMALL sealed enclosure size. Shallow mounting depth. Sounds FANTASTIC!!! I pushed this thing as hard as I could and never once did it complain.

Cons: Bought the matching Polk speaker grill and wasn't crazy about the way it fit. It doesn't fit down over the basket rim as I had expected it would. Leaves a 1/4" gap between the grill and the enclosure. Nothing to dislike about the woofer!

These subs hit hard!

Written By SethS, Billings, MT on Saturday, April 14, 2012

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

These subs hit extremely hard. I've heard a lot of different subs and different configurations but just bought two of these and have them hooked up to an infinity kappa one amp and it just blows things away. I was a little skeptical about the price at first but I will now only buy polk audio speakers as they are amazing quality for an amazing price.

Pros: Amazing quality at an extremely affordable price.

Cons: Wish they came with the grill in the picture.

Amazing sub

Written By Chris P, Columbus, OH on Sunday, November 06, 2011

Crutchfield Customer Review (What's this?)

  • "Coolness Factor"
  • Build Quality
  • Ease of Use
  • Sound Quality
  • Value

I have the sub in a .9 cu ft. (after displacement) and filled the box about 1/3 of the way with poly fill. The result is amazing punch and clarity complemented by surprising low end extension. It hits cleaner and lower than my previous db112 (ported). Sub hasn't even been broken in fully and it totally impresses me. I am only giving it 300W for now, but I will be upgrading to the Alpine MRX to give it 500W RMS soon.

Pros: Great punch, awesome low end extension.

Get everything you’ll need to enjoy your new Polk Audio MM1240D

We've verified that these enclosures are a good match for this subwoofer.
It's critical to have good wire, and none is included with the sub.
Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
These can be useful if you are building a custom box.
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed dual 12" subwoofer enclosure (Model BB122-100S)

Item #: 777BB1221S

(9)

$59.99
After $20.00 Price Break Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported single 12" subwoofer enclosure (Model BB12-150V)

Item #: 777BB12150

(30)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported single 12" subwoofer enclosure (Model BB12-200V)

Item #: 777BB1220V

(45)

$69.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported dual 12" subwoofer enclosure (Model BB122-125V)

Item #: 777BB1222V

(17)

$79.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(51)

Dynamat 19100

Dynamat 19100

License Frame Kit

Item #: 15419100

(15)

$14.99
Add to Cart
Dynamat Xtreme Wedge Pack

Dynamat Xtreme Wedge Pack

1 sheet, 4 square feet

Item #: 15410425

(7)

$39.99
Add to Cart
Dynamat Xtreme Trunk Kit

Dynamat Xtreme Trunk Kit

5 sheets, 20 square feet

Item #: 15419405

(13)

$169.99
Add to Cart
Dynamat Dynaliner

Dynamat Dynaliner

One 54" x 32" sheet (1/8" thick)

Item #: 15411101

(6)

$69.99
Add to Cart
Metra Box Carpet

Metra Box Carpet

Carpet roll (54" x 5 yards) — available in 3 colors (Black)

Item #: 120TL3015

(24)

$39.99
Add to Cart
Polyester Fiber Stuffing

Polyester Fiber Stuffing

Make your subwoofer think it's in a bigger box (1-pound pack)

Item #: 027808

(35)

$12.99
Add to Cart
Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCRB

(13)

Corner Protectors

Corner Protectors

Item #: 1251536

(5)

Rubber Feet

Rubber Feet

Item #: 125F1692

(4)

Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCRS

(6)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCSB

(7)

Springback Handle

Springback Handle

Item #: 125H1051K

(2)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCSS

(7)