About the Polk Audio MM1540D
Polk Audio's Mobile Monitor Series subwoofers bring out superior performance from lighter materials, so you'll get the impact you want without the extra weight of a conventional system. Advanced engineering and optimized components reproduce your sound with uncompromising accuracy, for low end that is rich and clear.
The MM1540D 15" dual voice coil subwoofer handles up to 425 watts RMS, using a copper voice coil and neodymium magnet motor to drive the polymer cone with exceptional efficiency. The carbon composite basket features a "wagon wheel" design that resists flexing during heavy excursion, so your sub hits solidly without distorting. The dual 4-ohm voice coils offer options for wiring a multi-sub system or drawing maximum power from your mono amplifier.
This sub is certified for marine use, and Polk includes corrosion-resistant stainless steel mounting hardware.
Product highlights:
- 15" subwoofer with dual 4-ohm voice coils
- polymer cone with butyl rubber surround
- carbon composite basket
- certified for marine use
- optional matching grille complements the basket design
- power range: 100-425 watts RMS
- peak power handling: 800 watts
- frequency response: 18-150 Hz
- sensitivity: 89 dB
- top-mount depth: 4-1/2"
- sealed box volume: 1.50 cubic feet
- ported box volume: 2.50 cubic feet
- warranty: 1 year
- MFR # AA3155-A
What's in the box:
Polk Audio MM1540D owner's manual
- 15" Dual 4-ohm voice coil subwoofer
- Foam gasket
- Eight 1-1/2" Allen head self-tapping screws
- 8 Speed-clips
- Owner's manual (English/ French/ Spanish/ German/ Italian/ Portuguese)
- On-line product registration information
Customer reviews for Polk Audio MM1540D
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Polk Audio MM1540D
Features & specs
Features and Specs | ||
---|---|---|
Size | 15 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polymer | |
Surround Material | Butyl Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
89 dB at 2.83 volts | |
Frequency Response | 18 - 150 Hz | |
Max RMS Power Handling | 425 | |
Peak Power Handling (Watts) | 850 | |
Top Mount Depth (inches) | 4 1/2 | |
Bottom Mount Depth (inches) | 5 1/2 | |
Cutout Diameter or Length (inches) | 13 7/8 | |
Frame Width | 15.387 | |
Frame Length | 15.387 | |
Vas (liters) | 100 | |
Fs (Hz) | 27 | |
Qts | 0.5 | |
Xmax (millimeters) | 25 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.5 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | 2.5 | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Enclosure Compatibility
Features
Klippel Optimized: Using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer's motor structure, voice coil alignment and suspension for the best possible performance, even at extreme listening levels.
Polymer Woofer Cone with Butyl Rubber Surrounds: The Polymer woofer cones and butyl rubber surround will not break down over time and will survive the rigors of harsh automotive environments.
Voice Coil and Former: The high temperature 50mm copper voice coil and polyamide former withstand the most rigorous use while maintaining extremely low distortion for bass punch and output.
Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2-ohm load. When wired in series, the woofer presents an 8-ohm load.
Carbon Composite Basket: The woofer's carbon composite basket is lightweight and will not flex during music audio peaks.
Input Terminals: The nickel plated heavy duty input spring-post terminals accommodate pin connectors, single or dual banana plugs, or bare speaker wire up to 10 AWG.
Preconditioning Period: Mobile Monitor subwoofers will achieve optimum performance once they are thoroughly broken in. To break in your new MM subwoofer, play 20 to 30 hours of music at moderate levels.
Marine Certified Woofer: Polk MM Series speakers are built to withstand exposure to moisture and UV rays, so they work well in boats and cars.
Enclosure Compatibility
Sealed Box Volume: Polk recommends mounting this woofer in a sealed enclosure made of 3/4" MDF with an internal volume of 1.5 cubic feet.
Ported Box Volume: Polk recommends a ported enclosure made of 3/4" MDF with an internal volume of 2.5 cubic feet using a slot port measuring 18.5" wide x 1.25" tall x 20" deep.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great sub for the price. I squeesed this into a 16 inch box to replace my center console. Has @ 2.2 c.ft. air space. Pioneer GM-D8601 amp powering it. Very great sounding sub. Cant beat the price. I feel like I stole this sub from Crutchfield. : )
Bman 350 from Lewiston, Id