Skip Navigation

Polk Audio PB 65

Pre-construction brackets for
RC65i in-wall speakers

Item #: 107PB65

In Stock

4 Reviews | Ask Questions

Your price: $43.99 pair Earn up to 44 Rewards points

Add to Cart

+ Add to wishlist + Email me alerts for this product

Open Box: $34.99

View all associated offers

These pre-construction brackets are designed to hold Polk's RC65i in-wall speakers. Use the included wings to attach the bracket to wall studs before the drywall goes up. Polk provides brackets, gaskets, and all the hardware you'll need to do a quick and easy installation.

Product Highlights:

Polk Audio PB 65 Reviews

Average Customer Review:

4 Reviews

Easy Installation, little flimsy

Written by: SeanF from Chicago, IL on November 6, 2014

Crutchfield Customer Review (What's this?)

I am in the process of getting my basement finished, so since it was pre-drywall, I figured I would use the mounting brackets. They were super easy to put up, and I found that it will make final installation of the speakers very easy. They are not the best made product and the screws it came with are very soft as the heads spun off on a few of them when screwing into a stud. That said, it does what it is supposed to do, although, should be much cheaper.

Pros: Easy to install

Cons: A little pricy

Easy Installation, Cheap Screws

Written by: GabeP from Horseshoe Bay, TX on August 25, 2013

Crutchfield Customer Review (What's this?)

Straight-forward, simple installation in a new-build home. My only complaint is that the drywall screws provided with the brackets are a bit substandard. All but two of them broke off at the head when screwing them into the studs. Not expensive to replace them, but it did result in an inconvenient trip to the hardware store. House is not complete yet, so not sure how much of a difference these will make vs installing the RC65i speakers without brackets.

Pros: Easy installation.

Cons: Sub-standard drywall screws provided.

OK for New Construction

Written by: Matt from Atlanta, GA on January 25, 2011

Crutchfield Customer Review (What's this?)

I used these before the drywall went up. They are just ok...very flimsy, and the screws
that come with them to attach to the wood studs are awful. Use drywall screws or buy
some wood screws to attach to studs.



low value

Written by: gardner from des moines, IA on January 20, 2010

Crutchfield Customer Review (What's this?)

You'll spend more time installing and adjusting these brackets than the actual speakers. For the price, you get some molded plastic, which seem to be relatively low cost to produce. When installing the machine screws that hold the brackets together, strip and loosen easily, then when you screw in the drywall style screws to the studs, the bracket gets pulled out of level or square, as the screw drifts in the wood. The screws that came with it, will break off w/ minimal torque, so discard those and use drywall screws. If the whole bracket and side wings were molded one piece, it would be better. I liked the PB85 style better. Installing the bracket before drywall will cause you to have to cut and line up the drywall hole precisely with the bracket, but if you skip the bracket and cut the hole in the drywall later, then the hole position is less critical. I also installed a pair of RC65i without brackets in existing drywall, and cut the hole in the same amount of time as installing brackets elsewhere.



Hands-on research

What's in the box?

Download owner's manual

  • 2 Plastic speaker frames
  • 4 Plastic wings
  • Eight 1-1/4" Sheetrock mounting screws
  • Eight 5/8" Machine screws
  • Cardboard template
  • Instruction sheet

Product Research


Overview: The Polk PB65s are pre-construction brackets for the Polk RC65i in-wall/in-ceiling speakers. The included wings mount to the supplied speaker bracket and to the wall studs or ceiling mounts, giving you a sturdy mount to install the speakers. Each bracket requires a cutout in the drywall 7.5" wide x 10.875" tall.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Customer Q&A

Searches related to the Polk Audio PB 65 Pre-construction brackets for
RC65i in-wall speakers