About the Infinity Reference 1040w
Infinity Reference subwoofers add a strong jolt of bass to your system at an affordable price. Their solid construction and innovative basket design provide extended low-frequency response and excellent power handling.
The Reference 1040w 10" subwoofer features a polypropylene cone suspended in a large-roll rubber surround that absorbs distorting vibrations for cleaner sound. A progressive spider design applies more force to the cone as it travels to its limit, for superb control in extreme conditions. The vented polepiece cools the motor structure for increased reliability, while the aggressively-styled basket minimizes depth while allowing plenty of woofer excursion.
Priced per speaker
Product highlights:
- 10" 4-ohm component subwoofer
- innovative basket design
- polypropylene woofer cone with large-roll rubber surround
- frequency response: 25-400 Hz
- power range: 60-250 watts RMS (1,000 watts peak power)
- sensitivity: 91 dB
- progressive spider design
- top-mount depth: 4-1/2"
- sealed box volume: .75 cu. ft.
- ported box volume: 1.75 cu. ft.
- Recommended Q-Logic Box Type: Type 1
- warranty: 1 year
- MFR # 1040W
What's in the box:
Infinity Reference 1040w owner's manual
- One 10" woofer
- 1 Self-adhesive foam gasket
- Instructions
- Technical Data sheet
- Warranty card
- One 8" x 2-1/2" Infinity sticker
Customer reviews for Infinity Reference 1040w
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Reference 1040w
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Port diameter (inches) | 3 | |
Port length (inches) | 9 | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
91 dB at 1 watt | |
Frequency Response | 25 - 400 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 1000 | |
Top Mount Depth (inches) | 4 1/2 | |
Bottom Mount Depth (inches) | 5 1/8 | |
Cutout Diameter or Length (inches) | 9 1/4 | |
Frame Width | 10.369 | |
Frame Length | 10.369 | |
Vas (liters) | 37.98 | |
Fs (Hz) | 29 | |
Qts | 0.44 | |
Xmax (millimeters) | 11.5 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.75 | |
Minimum Sealed Box Volume (cubic feet) | 0.75 | |
Maximum Sealed Box Volume (cubic feet) | 0.75 | |
Ideal Ported Box Volume (cubic feet) | 1.75 | |
Minimum Ported Box Volume (cubic feet) | 1.75 | |
Maximum Ported Box Volume (cubic feet) | 1.75 |
Product Research
Features
Enclosure Compatibility
High-efficiency Polypropylene Woofer Cone: This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.
Large-roll Rubber Surround: The large-roll rubber surround provides optimum cone-edge suspension and absorbs distortion that may travel up the cone edge, ensuring clean, tight bass.
Proprietary Basket: The unique basket design delivers a decrease in mounting depth while maximizing woofer excursion.
Vented Polepiece: The vented polepiece provides additional cooling of the motor structure. The subwoofer's thermal capabilities are augmented, increasing power handling.
Progressive Spider: The subwoofer uses a progressive spider, which provides better control at excursion limits than more commonly used linear spiders. The result is reduced distortion at high output levels.
Gold-plated Binding Posts: The gold-plated binding posts will accept pin connectors, spade connectors, banana plugs, and bare wire.
Note: The binding posts are positioned too far apart to accept dual banana plugs.
Recommended Sealed Box Volume: Infinity recommends a sealed enclosure with an internal volume of 0.75 cu/ft.
Recommended Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 1.75 cu/ft with one 3" diameter x 9" long port.
Recommended Sealed Bandpass Box Volume: Infinity recommends a sealed bandpass enclosure with an internal volume of 2.0 cu/ft. The enclosure has a sealed chamber volume of 1.0 cu/ft and a ported chamber volume of 1.0 cu/ft with one 4" diameter x 7.875" long port.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
First,I'd like to give kudos to Crutchfield for "just simply incredibly awesome service." This little sub rocks! I have a 200 watt amp powering it, and it just sounds great in my Ford Explorer. Kudos to Crutchfield and to Infinty!!!
Joseph from Mt. Olive, NC