Chat
Contact us
Close contact box
Connect ID #
930 335 387 4
Connect ID #
930 335 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Infinity 1062w Reference Series 10" subwoofer with dual 4-ohm voice coils

Item # 1081062W

An Infinity Reference subwoofer makes every deep note of your music count.

An Infinity Reference subwoofer makes every deep note of your music count.

4 questions - 6 answers

Item # 1081062W

About the Infinity 1062w

Dominic DeVito
An Infinity Reference subwoofer makes every deep note of your music count. Whether you listen to jazz, rock, hip-hop, country, or all of the above, you'll hear and feel satisfying bass with this sub in your car.

An Infinity Reference subwoofer makes every deep note of your music count. Whether you listen to jazz, rock, hip-hop, country, or all of the above, you'll hear and feel satisfying bass with this sub in your car.

The 10" Reference 1062w offers a classy, no-nonsense look, with a high-gloss polypropylene cone that's accurate and hard-hitting. The durable large-roll rubber surround provides smooth, extended excursion with reduced distortion so you get impressive bass performance. Dual 4-ohm voice coils make it easy to draw big power from a compatible low-impedance amplifier or safely hook up a multi-sub system for heavy-duty low end.

The 1062w's unique motor structure cuts down on the mounting depth, and this sub works in sealed, ported, and bandpass enclosures so you get bass the way you want it. And since you want your investment to last, the 1062w features plenty of internal cooling to protect the sub's inner workings and keep it performing at its peak.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most 2-channel car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation. Most mono amps are stable down to 2 ohms.


Priced per speaker

READ LESS

Product highlights:

  • 10" subwoofer with dual 4-ohm voice coils
  • polypropylene woofer cone with large-roll rubber surround
  • progressive spider design for excellent cone control
  • frequency response: 25-400 Hz
  • power range: 100-275 watts RMS (1,100 watts peak power)
  • sensitivity: 91 dB
  • top-mount depth: 5-7/8"
  • sealed box volume: 0.75 cu. ft.
  • ported box volume: 1.75 cu. ft.
  • warranty: 1 year
  • MFR # 1062W

What's in the box:

  • 10" DVC 4-ohm woofer
  • Self-adhesive foam gasket
  • Instructions
  • Technical Data sheet
  • Warranty card

Customer reviews for Infinity 1062w

Loading reviews...

Average review:

5.0 out of 5 stars
13 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Infinity 1062w

Pat M.

Product Research

Features
Enclosure Compatibility

Features

High-efficiency Polypropylene Woofer Cone: This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.

Large-roll Rubber Surround: The large-roll rubber surround provides optimum cone-edge suspension and absorbs distortion that may travel up the cone edge, ensuring clean, tight bass.

Dual 4-ohm Voice Coils: This woofer features dual 4-ohm voice coils that offer flexibility in wiring. When the voice coils are wired in parallel with each other, the woofer presents a 2-ohm mono load. When the voice coils are wired in series with each other, the woofer presents an 8-ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4-ohm load.

Proprietary Basket: The unique in-board motor structure reduces the overall mounting depth, without limiting enclosure options.

Vented Polepiece: The vented polepiece provides additional cooling of the motor structure, thus increasing power handling.

Progressive Spider: The subwoofer uses a progressive spider, which provides better control at excursion limits than more commonly used linear spiders. The result is reduced distortion at high output levels.

Enclosure Compatibility

Sealed Box Volume: Infinity recommends a sealed enclosure with an internal volume of 0.75 cu/ft. Sealed enclosures provide the most control over a woofer, will handle more power, and provide more accurate sonic reproduction, making them suitable to all types of music.

Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 1.75 cu/ft with one 3" diameter x 4.75" long port. Ported (or vented) enclosures provide better efficiency in the 40-50Hz range, and are suitable for use with small amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of sound quality at low frequencies (40Hz and below), and control.

Bandpass Box Volume: Infinity recommends a bandpass enclosure with an internal volume of 2.0 cu/ft. The enclosure has a sealed chamber volume of 1.0 cu/ft and a ported chamber volume of 1.0 cu/ft with one 4" diameter x 7.875" long port. Bandpass enclosures often provide the most output available from any amplifier and subwoofer combination at the expense of sonic accuracy. If sheer SPL is desired most, a bandpass enclosure is recommended.

Loading accessories...

Customer Q&A

4 questions already asked

Q
Can it be run on 1 ohm ?
frankthatank  Dec 20, 2014
3 answers
A
Yes
myron  Dec 22, 2014
A
I personally wouldn't try it, but I feel like if you were to do it without blowing the sub you'd have to lower the wattage you have going to the sub. You will also have to have a 1-ohm stable amp.
mitchell  Dec 21, 2014
A
No, dual voice coils at 4 ohms each will enable you to wire it down to two ohms, if wired parallel.
linda  Dec 21, 2014
Q
I'm looking to put two of these in a sealed box in my GF's 2008 Mazda 3. I was wondering what amp you would recommend? I think my hifonics XXV Maxximus is a bit overkill. (said very sarcastically) lol
brian  Nov 05, 2014
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Nov 06, 2014 (Staff)
Q
Can the plastic magnet cover be removed to reduce the mounting depth?
stephen  Jul 09, 2014
1 answer
A
Not noticably. it rests along the bottom of the magnet.
sean  Jul 10, 2014

Loading articles...

Compare the sound