Add some life to your vehicle's sound system with the Infinity Kappa 10.9t tweeters. Install these 1" textile domes — the same tweeters found in many of their popular home speakers — in an appropriate location, and add a new dimension to your music.

The tweeters handle down to 3,500 Hz, so you'll hear lots of definition and detail, no matter where you sit. And they offer frequency response extending all the way up to 35,000 Hz, so they'll reproduce the overtones and harmonics that add realism to your music.

Computer-optimized outboard crossovers allow only the appropriate frequencies to reach the tweeters. Infinity includes mounting hardware to install the tweeters in custom or factory locations.

Product Highlights:

  • 1" UHF textile dome tweeters
  • 2-ohm impedance
  • flush- and surface-mount hardware included
  • Starfish™ bracket for mounting in factory tweeter locations
  • outboard computer-optimized crossovers
  • power handling: 2-50 watts RMS (150 watts peak power)
  • frequency response: 3,500-35,000 Hz
  • sensitivity: 93 dB
  • flush-mount depth: 1-5/16"
  • warranty: 3 years
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • 2 Tweeters
  • 2 Crossovers
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Starfish tweeter mounts
  • Six 5/8" Self-tapping screws
  • Six 3/8" Flat head screws
  • Two 3/8" Bolts
  • 4 Washers
  • 1mm Allen wrench
  • Instructions
  • Warranty information

Product Research

Features

High-Output Design: The high output 2-ohm voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4 ohm speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 2-ohm load.

Edge Driven UHF Dome Tweeters: Each speaker has an Edge-driven UHF dome tweeter. The benefit is increased power handling and reduced distortion at high output. This technology also allows for better integration with the mid/woofer. The tweeter wire terminals are set screws, tightened using the included 1mm Allen wrench; they accept bare wire up to 14 gauge.

Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:

  • I-Mount Tweeter Mounting System: The tweeters can be surface or flush mounted with Infinity's innovative I-Mount system:
    • Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
    • Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
  • Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
    • Surface Mount (behind grille panel): Once the Starfish bracket is trimmed, it is screwed to the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
    • Flush Mount (behind grille panel): Once the Starfish bracket is trimmed, it is dropped into the cutout in the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
    • Bottom Mount (to grille panel): Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
    • Flush Mount (in-dash location): Once the Starfish bracket is trimmed, it is dropped into the cutout in the dash. Then, the tweeter is inserted into the bracket and locked into place.

Tweeter Mounting Dimensions:

  I-Mount Surface Mount I-Mount Flush Mount Starfish Surface Mount (behind grille panel) Starfish Flush Mount (behind grille panel) Starfish Bottom Mount (to grille panel) Starfish Flush Mount (in-dash location)
Mounting Height 1.316" 0.693" 1.328" 0.624" N/A 0.624"
Depth 0.552" (screw depth) 1.311" 0.552" (screw depth) 0.692" 1.370" 0.692"
Frame Diameter 2.216" 2.855" 2.221" 2.221" 2.221" 2.221"
Cutout Diameter N/A 2.360" N/A 2.221" N/A 2.221"

Crossovers: Kappa speakers include computer-optimized, voice-matched crossovers, using audiophile quality air core inductors and polypropylene capacitors. The crossover slope is 18 dB/octave.

Crossover Connections: Each crossover has set screw input and output terminals that will accept up to 10 gauge bare wire.

Crossover Dimensions:

  • Length: 3-3/8"
  • Width: 2-3/8"
  • Height: 1-1/4"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Infinity Kappa 10.9t Reviews

Average Customer Review:

10 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Replace for Camry 2014 dash factory speaker?

Written By patcam99, West Covina, Ca on Sunday, June 29, 2014

I would ask someone to know how to install this amazing tweeters to Camry 2014 dash factory speaker because when you disconnect the original hardness from speaker the front speaker will not functional at all. Please help.

Not an easy install

Written By SteveS, The Woodlands Tx on Wednesday, December 12, 2012

The speakers look well made on first inpression, but when installing them major problems came up. The set screws that you have to use to install the lead wire are tottally wrong. Way to small. Why not just have a section of wire coming out of the rear of the case. Instead they have over engineered the tweeter. The crossovers are good, clearly marked. A huge assortment of installing brakets are included and once installed the speakers sound very good so far. At least untill those blasted set screws come loose in the doors of the car.

Pros: Sound great.

Cons: VERY VERY small set screws to connects the speaker wire? Really!!!!

Uses inexcusibly tiny screws

Written By Steve S, Orlando, FL on Sunday, July 22, 2012

5 for the audio quality, not 5 for the manufacturing.

The speaker wires are screwed into the tweeters using the smallest screws I have ever seen in my life. Not only are small screws weak, but you will find the screws are so incredibly small that you may not even be able to find the necessary alan wrench if you ever need to. I have found myself needing to rewire these speakers because I've started noticing cracking in one speaker that I assume was caused by a loose wire. Yup, there was a loose wire, but I have no way to attach a new one because I have no way to screw it due to the sub-atomic size of the screw..

There is plenty of room on these speakers for a proper screw so this is a completely inexcusable problem, and to be honest, comes across as downright arrogant on the part of Harman. I have already gone to Home Depot and bought a pack of small wrenches only to find that even this tiny set of wrenches is too large for these screws. THIS IS INEXCUSABLE especially since the only reason the wire came loose was due to the absurd tininess of the screws.

Woe to he who accidentally drops these wildly absurd screws.

Pros: Sound great when the wires don't pop out

Cons: Uses screws that are so small you will never be able to change them if you lose the provided (and also tiny) alan wrench.

No Less Than Brilliant

Written By Perseverance421, Pompton Plains, NJ on Friday, June 29, 2012

After having a number of friends try to make their cars "the best" according to overall sound, they all failed miserably except for one. He (having much experience in customizing cars) listened to what I knew to be the truth. That is, that these speakers add an additional layer of sound that I have heard with any other speaker. It is clear, crisp, defined, and as this tweeter is about to make your head from the superb highs, you are taken back towards reality.

Pros: Best in the business.

Cons: If you listen to awful music...please don't make it louder.

Great tweeters, high end stuff

Written By SergioRM, Los Angeles, CA on Tuesday, May 22, 2012

These tweeters are no lightweights... figuratively and literally. they are pretty big compared to other tweeters. Mounting the crossovers might be a little tricky for some, but not that big of a deal. The sound... pretty freakin amazing, world of difference to other tweeters. I have them amplified so having them being 2ohm speakers works out even better.

Pros: Clarity, power, craftsmanship.

Cons: Size, mounting difficulty (if you don't have a stock mounting place), they are pretty ugly :/

Sound better than they look!

Written By DAVE, Winston Salem NC on Sunday, May 06, 2012

Crutchfield Customer Review (What's this?)

These are excellent tweeters with clean, high-impact sound. Just what I need in my car's system. However, they are large units that need a lot of depth if you want to mount them flush or behind existing grills. They are somewhat directional and I would like a little more dispersion, But otherwise...great product. I had to mount them over my existing stock tweeter door locations and they have garish chrome grilles and a black pointed external cone in the center of the little grill. Looks like something Lady Ga Ga would wear!. These are the third set of tweeters I have tried in this car and, sound-wise, the best by far!

Pros: Great dynamic range and clean, pure, natural sound.

Cons: Units are rather large and the grills are butt-ugly. Also, I ordered "opened box" to save money. My mistake...whoever had them before had mangled the set screws on the crossovers. For a few more bucks, brand new is probably a better option.

Simply Great

Written By Anonymous, Port St Lucie, FL on Friday, April 09, 2010

Crutchfield Customer Review (What's this?)

Recently installed a pair of these in my 2010 highlander and immediately notice how alive the sound system became. Can hear details I couldnt hear before with the excuse for tweeters the factory ones were. Installing them was a cinch and I even cannibalized the old tweeter mounts to install them, they were the perfect size. Have 6 1/2's Kappas in the rear doors which also sound great no matter how loud I crank it. Worth every penny.

Excellent Clarity

Written By Josh, Zion, IL on Wednesday, September 30, 2009

Crutchfield Customer Review (What's this?)

I bought these tweeters to complement my 4" Infinity 4022I's in the dash,
6" Infinity 6022SI's in the rear of my 93 4Runner. Instilation was a breeze
with the mounting options these came with I was able to use the original
brackets from the old tweeters by drilling two holes in them. I havnt
insalled my new Sont GT630 yet but even with the stock radion thats
installed my truck sounds absolutely great.

Anyways I gave it a 5 since the ease of installing them and the Crossovers
wes simple. The only thing wrong with this brand is the instructions could
be alot better if you dont know alot about them.

Top notch

Written By TJHammer, Brooklyn, NY on Monday, February 16, 2009

Crutchfield Customer Review (What's this?)

I've had 2 aftermarket systems before this and no tweeters compared to the audible range and clairty difference that these Kappas provide, not to mention they make stocks seem like cardboard.
The crossover and tweet are easy to install. For my 09 Camry I had to fabricate a mounting plate. The Kappa kit came with several tweeter mounting options/pieces, to which I modified one to suit my fabricated plate. This was the issue with the car NOT the Infinity kit, because it comes with several options.
Sounds like the band is singing right there in my front passenger seat. Highly recommend them...ready to order the Kappa 6x9's!

Great Tweeter

Written By Matt, Portland, TX on Tuesday, September 23, 2008

These tweeters were fairly easy to install. The mounting hardware that came along with the tweeters were easy to use and "mold" to my custom install. I used these in the upper speaker area behind the dash on my 2000 Grand Cherokee. I had to re-route the wiring so I could use the bypasses properly, but it wasn't too difficult.

The sound quality is excellant and I'm very happy with the product. You get what you pay for.

Product reviews from the Crutchfield Labs

Video: Infinity Kappa Car Speakers
by Robert Ferency-Viars

Infinity Kappa is Infinity's high-performance line of car speakers. They're designed and built to give you excellent sound, especially in an amplified system. Watch as our experts show you why...

What are the Labs?

Get everything you’ll need to enjoy your new Infinity Kappa 10.9t

You may need speaker wire to get the signal to your tweeters. It's sold by the foot, so enter the amount you'll need when you get to your cart.
Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
The right tools will help keep your installation simple and clean.
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(53)

Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415

(46)

$26.99
Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435

(32)

$99.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(3)

$29.99
Add to Cart