Infinity built the latest Kappa speakers with improved technology and high-end materials to provide you with outstanding sound reproduction. The Kappa 52.9i 5-1/4" speakers feature light, but stiff woven glass-fiber woofer cones that won't flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.

Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you'll hear the music the way it was recorded with minimal coloration or distortion. The dome tweeters pivot, allowing you to adjust them for better stereo imaging.

The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.

Important Note: You should use an outboard amplifier to power these speakers.

Installation Note: These Infinity speakers do not include screws or speed clips. You may be able to use the factory screws to install them, but it's always a good idea to have an assortment of self-tapping screws (5/8" to 1") and speed-clips on hand.

Product Highlights:

  • 2-way 5-1/4" speakers (pair)
  • True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
  • Plus One® woven-glass-fiber woofer cone with hi-roll rubber surround
  • 1" rotating UniPivot, edge-driven M.M.D.® dome tweeter
  • computer-optimized outboard crossover with tweeter level control
  • direct-connect crossover dongle
  • power range: 2-55 watts RMS (165 watts peak power)
  • frequency response: 55-25,000 Hz
  • sensitivity: 94 dB
  • top-mount depth: 2-3/16"
  • warranty: 3 years
  • Our 60-day money-back guarantee

Why replace your car's original speakers?

The speakers that originally came in your car were made from inexpensive materials, designed to create acceptable sound at the lowest possible cost to the manufacturer. If you love music, you deserve better. Name-brand aftermarket speakers deliver fuller, richer sound with considerably more detail and nuance, and they're capable of playing louder and cleaner than factory speakers. Connect new speakers to your factory radio and you'll get the best possible sound from your dealer-equipped system. Pair them up with a new car stereo for a level of enjoyment that can rival a high-fidelity home audio experience.

Hands-on research

What's in the box?

Download owner's manual

  • Two 2-way speakers
  • 2 Grilles
  • 2 Grille rings
  • 2 In-line crossovers (attached)
  • 2 Adhesive backed foam gaskets
  • Instructions
  • Warranty information

Features and Specs

General
Design 2-way
Tweeter Design Dome
Tweeter Composition MMD
Woofer Composition Woven-glass fiber
Woofer Surround Hi-roll rubber
Parts Warranty 3 Years
Labor Warranty 3 Years
Specifications
Sensitivity 93.5 dB at 2.83 volts
88.2 dB at 1 watt
Frequency Response 55 - 25k Hz
RMS Power Range (Watts) 2-55
Peak Power Handling (Watts) 165
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 3/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 4 5/8

Product Research

Features

Plus One Woofer Cones: The Plus One speakers use cones more surface area than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One design offers greater bass output and a significant increase in efficiency.

Woven Glass Fiber Woofer Cones: This woven-glass-fiber material is very light and extremely stiff, minimizing cone flex. This results in very low distortion and improved clarity.

Edge Driven MMD Dome Tweeters: Each speaker has an Edge-driven MMD (Metal Matrix Diaphragm) dome tweeter. The benefit is increased power handling and reduced distortion at high output. This technology also allows for better integration with the mid/woofer. The tweeter has an adjustable output level, +0 dB (flat) and -3 dB.

UniPivot Tweeter: The tweeter is angled and can be rotated about 270° after installation. This allows you to direct the tweeters toward the listeners, very useful for speakers mounted low in a door.

High-Output Design: The high output 2-ohm voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4 ohm speakers). The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier. The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 2-ohm load.

Crossovers: Kappa speakers include computer-optimized, voice-matched crossovers, using audiophile quality air core inductors and polypropylene capacitors. The crossover slope is 12 dB/octave.

Crossover Connections: Each crossover is connected to the speaker by a 6" wire. The input terminals are set screws that will accept up to 10 gauge bare wire.

Crossover Dimensions:

  • Length: 3-1/16"
  • Width: 1-1/4"
  • Height: 1-3/16"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Infinity Kappa 52.9i Reviews

Average Customer Review:

12 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great Infinity Speakers

Written By Brian, Florida on Friday, October 05, 2012

Crutchfield Customer Review (What's this?)

These speakers went into the speaker bar on my Jeep Wrangler. It was a perfect fit and I had no problems at all. They sound great, a huge improvement over my stock speakers.

Pros: Easy fit. Great sound for their size

Cons: The grill covers look great, but didn't fit my speaker bar

Not 100% satisfied... yet...

Written By AlexM, Philadelphia, PA on Saturday, September 15, 2012

Crutchfield Customer Review (What's this?)

Good - not stellar sound at this point. I'm still tweaking my EQ and may change the configuration of the door boxes that hold the speakers to get better mid and low range.

Pros: Good sound; easy to install

Cons: Build quality. The tweeter is on a pivoting stalk coming from the center of the speaker - without any incidents (impact, particularly hard bumps) it broke! It was just hanging there by the wires rattling against the speaker cone! Crutchfield is sending me a replacement without any fuss (Awesomeness), hopefully it was just a one off issue and I'll never have to take the door panel off again!

Great value and sound.

Written By BD, LA, CA on Friday, June 01, 2012

Crutchfield Customer Review (What's this?)

Great speakers. Pound for pound, these little guys pound out the sound. Ultimately, I will be adding a subwoofer to round out the very low end. In the meantime, these Kappas (paired to Kappa 682.9s in the rear) are a great install.

Be careful with the center-mounted tweeter while installing. Could break off very easy. Mount the crossovers with mounting tape and zip ties through the provided "mounting slot."

Pros: Sound. Value.

52.9i

Written By Mike, knoxville TN on Wednesday, March 07, 2012

Crutchfield Customer Review (What's this?)

Good product with crystal highs and mids no bass but not what I bought it for. The only reason I didnt rate it five was because when paired with the components it falls very short to comparison 55watts is just not enough power even with the amp Ive got them connected to, but still good product and I dont sit in the back anyways.

2011 Kia Sorento

Written By Ken, PA on Friday, February 11, 2011

Crutchfield Customer Review (What's this?)

These speakers are great, and a HUGE improvement over the factory Kia speakers. I appreciate all types of music, so I'm fairly critical of weak highs or lows; I found neither with these. I replaced the front pair with these (52.9i), and replaced the rear pair with a set of Infinity Kappa 62.9i speakers. To be honest, I'm fairly certain I could have fit the 62.9i speakers in the front too, but I followed the fit guide here to be safe. Wiring harnesses aren't yet available for the 2011 Kia Sorento, so I had to cut and crimp every wire. However, I didn't drill out the rivets of the speaker mounts as directed. Following the advice of someone on kia-forums.com, I simply cut the old speaker and mounting arms out of the existing mount, and screwed the new speakers in place - with amazing results. I'm still using the factory head unit, to preserve the look, steering wheel controls, and Sirius setup. Worrying that it might be underpowered, I bought an amp too, but I won't be installing it.

infinity kappa 52.9i

Written By dd, north Alabama on Thursday, January 27, 2011

Crutchfield Customer Review (What's this?)

I installed these speakers on my Victory XC. I am impressed with the sound and clarity. The bass is good to be on a motorcycle.
The install was easy, took about 40 minutes. With the IPod the sound is very impressive, with the fm it is still good just not as good as the IPod but you shouldn't expect it to be.
I will be adding the Kappa 62.9i on my Ultra real soon

1997 Jeep Wrangler Sahara

Written By Mark, Saint Albans, WV on Sunday, December 26, 2010

Crutchfield Customer Review (What's this?)

I purchased a set of the 52.9i and 42.9i Infinity Kappa speakers for my 1997 Jeep Wrangler Sahara. The 42.9i's, using the free adapters, mounted in the lower front dash and the 52.9i's were placed in the sound bar with minimal effort. Everything that was needed to install the speakers was provided by Crutchfield.

After my son and I completed the installation, we turned on the Alpine CDA-9886 CD Receiver, purchased earlier from Crutchfield, and the sound was amazing! Crisp highs, outstanding mid-range and much improved lows could be heard through all volume levels as we cranked up the volume.

I am completely satisfied with the Crutchfield Advisor's recommendation of these speakers.

On another note, Crutchfield has one of the best customer service experiences I've had. I've been a customer for several years and have never been disappointed.

Looking for Something Better

Written By PhotoArtsLA, North Hollywood, CA on Saturday, September 04, 2010

I got these speakers as a gift, installed them with a new Alpine head unit (for all the weak D/A, I want my iPod Touch in the car) in my Mercedes 450 SEL. Also installed matching speakers for the front, and the result... what ever happened to sonic quality? The world has devolved into sonic rubbish. Adding the sub would be pointless. I'd shudder to see whatever the curve is on these speakers. The hills and valleys of weaknesses. I know not only how things should sound, but using the most translatable speakers existent. I will be taking these things out and trashing, or selling them. Two stars because they did make noise.

Outstanding sound! 2002 Jeep Wrangler

Written By Dan, Dunedin, FL on Tuesday, January 12, 2010

I installed these in the soundbar of my 2002 Jeep Wrangler and these are a big improvement over the 5-1/4 inch Pioneers that I replaced. Bass is notably better and the highs and mid-range sound light years better. The wweeter is angled and can be rotated to be directed toward the passengers which is a great feature. Overall I could not be happier with the sound these Infinitys put out. They are hooked to a Alpine receiver and I have Polk 4x6 (no amp to the Polks or Infinitys as they are powered by the receiver) in the dash and a 6" Rockford Fosgate amplified bass tube behind the rear seat. These aren't cheap for 5-1/4" speakers but they are well worth the $$. And I was able to use the Inifinity grill which looks cool mounted in the soundbar compared to stock.

Infinity Kappa 52.9i

Written By Hassel, Aurora, Kentucky on Sunday, November 22, 2009

I love these speakers. they were a vast improvment over my stock speakers....i have an Cadillac CTS with the bose system and i wanted more out of it so i first added these to my back doors and there bigger brother components to the front and was amazed! on a 4 channel alpine off a alpine deck they sound nothing short of amazing! I am hearing suddle hints and decresendos in songs i never knew exhisted. They do have to be amped to get the full force, but they are great for the price. and paired up with the right amp will sound great in any car!

Infinity Kappa 52.9i

Written By Jeff, North Richland Hills, TX on Friday, October 16, 2009

Crutchfield Customer Review (What's this?)

I replaced the factory speakers in the sound bar of my 2000 Jeep Wrangler. They are a huge improvement. Clear highs and even a little bass. They're attached to a Kenwood head unit and I get much more volume and alot clearer sound than I got from the factory speakers. I highly recommend the Infinity Kappa speakers.

Great sound!

Written By Anonymous, Louisville, KY on Tuesday, September 22, 2009

Crutchfield Customer Review (What's this?)

I have these attached to a Sony Xplod head in my rear speaker pods. These blow the Xplod speakers that I had in there before out of the water so badly it's almost embarrassing. The deep ends have plenty of punch, midtones are clear, and high tones are great, but not too overbearing like with cheaper speakers. The efficiency of these speakers means you don't have to turn your volume up very high to hear them. The bass I get almost feels like I have a small subwoofer mounted in my car, but maybe it's the Polk 6 1/2s I paired with them. Either way, great speakers and I'd definitely recommend these to someone looking for a mid-range priced car speaker with a smaller size such as this.

Product reviews from the Crutchfield Labs

Video: Infinity Kappa Car Speakers
by Robert Ferency-Viars

Infinity Kappa is Infinity's high-performance line of car speakers. They're designed and built to give you excellent sound, especially in an amplified system. Watch as our experts show you why...

What are the Labs?

Get everything you’ll need to enjoy your new Infinity Kappa 52.9i

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You may need speaker wire to connect your speakers to your amp or receiver.
Keep your speakers clean and dry. They compress to fit behind your speakers.
These speaker connectors are handy if you're running new speaker wire or if your speakers have oversized terminals.
The right tools will help keep your installation simple and clean.
If your stereo doesn't cut the deep bass from your full-range speakers, a set of bass blockers can help prevent distortion and give you cleaner bass too.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415

(45)

$26.99
Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435

(32)

$99.99
Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(51)

Boom Mat 5-1/4-inch Speaker Baffles

Boom Mat 5-1/4-inch Speaker Baffles

Protect your speakers
Regular and slim-line sizes (Slim-line: 2-1/2" depth)

Item #: 696B050321

(11)

$7.99
Add to Cart
XTC 5-1/4

XTC 5-1/4" Speaker Baffles

Protect your speakers (Slim-line: 2-1/2" depth)

Item #: 237XT52

(60)

$6.99
Add to Cart
Metra Female Quick Slides

Metra Female Quick Slides

An assortment of female quick slide connectors for connecting to speaker terminals

Item #: 120FQS10PK

(48)

Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(15)

$19.99
Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615

(12)

S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(69)

Pro.Fit Hook Tool Set

Pro.Fit Hook Tool Set

Installation tools — pair

Item #: 042DM3022

(9)

Pro.Fit Trim Panel Tool

Pro.Fit Trim Panel Tool

Remove your vehicle's trim panels without damage

Item #: 042DM4022

(87)

Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(33)

$12.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(52)

$24.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
Bass Blockers

Bass Blockers

Pairs (300 Hz cut-off)

Item #: 127BB300A2

(84)