About the Infinity Reference 6032cf
A wider frequency range
A wider frequency range
Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.
Infinity Reference 6032cf 6-3/4" speakers feature a Plus One+ woofer design that packs more surface area into the cone so you get more low-frequency punch. Large textile dome tweeters project smooth, clean highs, and they're equipped with a level control so you can fine-tune the degree of brightness to match your taste. Large voice coils in the edge-driven textile dome tweeters allow for high power-handling.
Infinity makes sure that your installation stays stress-free by including Intermount III, a proprietary mounting system that allows you to install these 6-3/4" speakers in a variety of 6" to 6-3/4" factory locations. You'll also find adapters that fit many domestic and imported cars. Grilles are not included — factory grilles are appropriate for most installations, but optional grilles are available.
Note: Infinity describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Important Note: These Infinity Reference speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.
Installation Note: These Infinity speakers do not include screws or speed clips. You may be able to use the factory screws to install them, but it's always a good idea to have an assortment of self-tapping screws (5/8" to 1") and speed-clips on hand.
Priced per pair
Product highlights:
- 2-way car speakers for 6-3/4" and 6-1/2" locations (pair)
- Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
- 1" UniPivot edge-driven, textile dome tweeter
- Intermount III mounting system for fit in 6-3/4" openings
- True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
- compatible with virtually all factory or aftermarket car stereos
- power range: 2-60 watts RMS (180 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 93 dB
- top-mount depth: 2-1/16"
- warranty: 1 year
- MFR # 6032cf
What's in the box:
Infinity Reference 6032cf owner's manual
- Two 2-way speakers
- 2 Plastic mounting rings (Chrysler/GM)
- 2 Adhesive backed foam gaskets
- 2 Adhesive backed foam strips
- Instructions
- Warranty information
Customer reviews for Infinity Reference 6032cf
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Reference 6032cf
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Edge-driven Dome | |
Impedance (Ohms) | 2 | |
Tweeter Composition | Textile | |
Woofer Composition | IMPP | |
Woofer Surround | Hi-roll rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 93 | |
Frequency Response | 53 - 21k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 2 1/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 3/8 | |
Mounting Height (Inches) | 0.785 | |
Frame Width | 6.205 | |
Frame Length | 6.205 |
Product Research
Features
Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.
Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.
Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Textile Dome Tweeters (UniPivot Design): Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. The UniPivot design allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response. The tweeter housing can be turned approximately 315 degrees.
Tweeter Level Control: A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.
Mounting: Infinity's mounting system allows the 6032cf speakers to fit in 6-1/2" and 6-3/4" applications. Plastic adapter rings are included for each speaker.
Optional Grilles: The speakers do not come with any grilles. Optional grilles (108REF6032) can be purchased separately.
True Four Ohm Impedance Technology: The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier.
The Infinity Reference 6032cf replaces these items
Infinity Reference 6022i
For 6-1/2" and 6-3/4" openings
- Plus One+ polypropylene woofer with hi-roll rubber surround
- 1" rotating UniPivot textile edge-driven dome tweeter
- 2-60 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
These speakers sound great. When installed with the matchin set of 4x6 rear speakers, it is like being in the studio. Crisp and clear mids and highs. The switch for the tweeter is nice to have if the highs are just a little to much.
Bryan from Ellijay, GA