Rely on Infinity to revitalize the sound in your car. Replace your tired-out, old factory speakers with Reference Series full-range speakers that'll play your music louder and better.

Infinity Reference 9632cf 6"x9" speakers feature a Plus One+ woofer design that maximizes cone surface area so you enjoy richer, deeper lows. Large textile dome tweeters project smooth, clean highs, and their large voice coils allow for high power-handling. They're equipped with a level control so you can fine-tune the degree of brightness to match your taste. Grilles are not included — factory grilles are appropriate for most installations, but optional grilles are available.

Important Note: These Infinity Reference speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.

Installation Note: These Infinity speakers do not include screws or speed clips. You may be able to use the factory screws to install them, but it's always a good idea to have an assortment of self-tapping screws (5/8" to 1") and speed-clips on hand.

Priced per pair

Product Highlights:

  • 6"x9" 2-way speakers (pair)
  • Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
  • 1" UniPivot edge-driven, textile dome tweeter
  • True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
  • compatible with virtually all factory or aftermarket car stereos
  • power range: 2-100 watts RMS (300 watts peak power)
  • frequency response: 46-21,000 Hz
  • sensitivity: 94 dB
  • top-mount depth: 3-1/16"
  • warranty: 1 year
  • Our 60-day money-back guarantee

Why replace your car's original speakers?

The speakers that originally came in your car were made from inexpensive materials, designed to create acceptable sound at the lowest possible cost to the manufacturer. If you love music, you deserve better. Name-brand aftermarket speakers deliver fuller, richer sound with considerably more detail and nuance, and they're capable of playing louder and cleaner than factory speakers. Connect new speakers to your factory radio and you'll get the best possible sound from your dealer-equipped system. Pair them up with a new car stereo for a level of enjoyment that can rival a high-fidelity home audio experience.

Hands-on research

What's in the box?

Download owner's manual

  • Two 6x9" 2-way speakers
  • 2 Bottom-mount brackets
  • 2 Adhesive backed foam strips
  • Instructions
  • Warranty information
  • Infinity logo sticker

Features and Specs

General
Design 2-way
Tweeter Design 1" Edge-driven Dome
Tweeter Composition Textile
Woofer Composition IMPP
Woofer Surround Hi-roll rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity 94 dB at 2.83 volts
Frequency Response 46 - 21k Hz
RMS Power Range (Watts) 2-100
Peak Power Handling (Watts) 300
Impedance (Ohms) 4
Top-mount Depth (Inches) 3
Bottom-mount Depth (Inches) 3 5/8

Product Research

Features

Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.

Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.

Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.

Textile Dome Tweeters (UniPivot Design): Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. The UniPivot design allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response. The tweeter housing can be turned approximately 315 degrees.

Tweeter Level Control: A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.

Mounting: Infinity's mounting system allows the 6932cf speakers to fit in top-mount and bottom-mount 6"x9" applications.

Optional Grilles: The speakers do not come with any grilles. Optional grilles (108REF9632) can be purchased separately.

True Four Ohm Impedance Technology: The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Infinity Reference 9632cf Reviews

Average Customer Review:

10 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Infinity 6x9's

Written By Lon, Lancaster, SC on Wednesday, January 08, 2014

Crutchfield Customer Review (What's this?)

Nicely made and heavy. The mid and high range sound was adequate but not crystal clear. The separate volume control worked but didn't improve the clarity. The bass is clear and strong at low volume. At mid to high volume the bass hits hard, clean and impressive.

Pros: Bass hits hard and solid at mid to upper volume level. Speaker handled all music types at top volume levels without distortion.

Cons: Mid and high sounds not as crisp and clean as the bass.

Infinity Reference 9632cf

Written By Mike C, Winnsboro sc on Tuesday, December 24, 2013

Crutchfield Customer Review (What's this?)

Once Crutchfield sent the correct wire harness adapter I've sounding great.

Pros: Direct replacement

Cons: None at this time

Infinity Reference 9632cf

Written By Javier, Puerto Rico on Tuesday, December 17, 2013

Crutchfield Customer Review (What's this?)

Perfect fitment. Nice speaker for the price.

Pros: Fitment, quality speaker for the price.

Cons: None so far.

Just the ticket....

Written By Roger W, Maryland on Friday, October 04, 2013

Crutchfield Customer Review (What's this?)

Wanted to upgrade the cheap factory rear deck speakers in my 2013 Camry,without changing the factory head unit, which has the touch screen controls I like. These made a big improvement in the sound clarity. Nice tight midbass, great mid range/highs. Plenty of bass with the stock head unit for my tastes, won't wake up the neighbors but that wasn't what I was looking for. 6x9's will fit in this car, you will have to make your own adapters(Crutchfield doesn't offer). Getting the rear deck off to mount these is a project, but can be done. Beware of the airbags, be carefull! Just ordered the same Infinity's in 6 1/2 for the front doors. Overall: Great improvement over the factory system, and can still keep the oem head unit.

Pros: Huge improvement in sound quality, factory head unit has enough power to drive these.

Cons: 2013 Camry takes some work to install these.

Great Value, Great Sound

Written By Stubb, San Diego, CA on Tuesday, September 24, 2013

I bought these speakers to replace stock Alpine speakers in a 2012 Charger. Although the team says they don't fit, they fit perfectly in the front doors of the 2012. In the rear deck there is some fitment issue due to a different alignment with the factory holes but a little work to get it done is worth it. I also replaced the front dash with the matching infinity 3032 3.5's which also is indicated not to fit, but the13 mm top clearance on those is sufficient for the 2011 and up models. I must say the speakers are great. I listed around to a lot of speakers when choosing Infinity, and this series is probably the best sound quality for the buck out there. I wasn't a fan before, but the sound quality and the 2 Ohm impedance convinced me to give it a try. In the doors these make great sound as the factory placement creates a box so the bass is strong and sharp. The OEM amp crosses over with the dash at 400 or so. You can consider not adding a subwoofer with these in the car. In the rear deck they are very balanced and overall the highs are clear without being harsh. I get a lot of detail out of the music now. The Rear deck is not enclosed like the doors, so the base is less pronounced but very good for the rear passengers, whose heads are right by the speakers. If you want quality sound without breaking the bank, Infinity is the way to go. My personal opinion is that I would have to spend significantly more money to get a noticeable improvement in sound quality.

Pros: Great, well-balanced sound that will sound great in the right placement. Crutchfield team was very helpful in getting details about fitment. beyond what is in the fit guide.

Cons: Although not their fault, making a more flexible mounting option for different 6x9 bolt patterns would be useful for allowing use in more vehicles. Fit perfectly in doors, had to work to fit in the rear deck.

nice speakers but didn't fit OEM holes

Written By boz, south easton MA on Saturday, September 21, 2013

Crutchfield Customer Review (What's this?)

Great sound but that's what I expected and paid for, however as usual nothing is easy and the drill pattern did not fit the factory holes so I had to drill. Why can't all speaker companies get on the same page with car companies and produce simple installation by having identical hole patterns!!! this is not asking for too much!

Pros: great sound

Cons: had to re-drill

Good upgrade from stock

Written By QCPhotoPro, United States on Monday, June 24, 2013

Crutchfield Customer Review (What's this?)

A nice upgrade from the stock Boston speakers in my Jeep Commander, these speakers sound great. There aren't many 2 ohm options out there to make the most of the stock amplifier, and these seem to work well. I wish they had a bit more bass, but you can't expect much more out of a 6x9 than what they're already providing.

Infinity 9632cf

Written By lonewolf, Sikeston Mo. on Sunday, January 27, 2013

Crutchfield Customer Review (What's this?)

Speakers sound very good. But that being said, I'm dissapointed that they didn't have mounting hardware or speaker wire in the kit.

Pros: Good sound, especially in the high range.

Cons: Not much bass, and there was no hardware or speaker wire...........

Very nice

Written By Anonymous, Hutchinson KS on Friday, September 02, 2011

Crutchfield Customer Review (What's this?)

I was very surprised by the bass that these speakers produce. they seem to match up very well with the Alpine head unit.

Not worth the money

Written By Bruce T, VA Beach, VA on Monday, November 15, 2010

Treble: Very good, clear
Mid: Nonexistent
Bass: Bad to Decent

Bought these two days ago, returning them. Bass gets distorted on heavy bass songs.
Mounting holes were not even close to my factory holes- no way to adjust them either.
Magnet is way too big. I have some old Jensen 2-way's that have been in my car for 4 or
5 years that sound much better than these.

Highs are good, but speakers aren't good enough all around to keep.

Get everything you’ll need to enjoy your new Infinity Reference 9632cf

Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
You'll need speaker wire to connect your speakers to your amp.
Keep your speakers clean and dry. They compress to fit behind your speakers.
These speaker connectors are handy if you're running new speaker wire or if your speakers have oversized terminals.
The right tools will help keep your installation simple and clean.
Dynamat 10415 Xtreme Speaker Kit

Dynamat 10415 Xtreme Speaker Kit

Two 10-in. x 10-in. Sheets

Item #: 15410415

(46)

$26.99
Add to Cart
Dynamat 10435 Xtreme Door Kit

Dynamat 10435 Xtreme Door Kit

With four 12" x 36" sheets — covers two doors

Item #: 15410435

(32)

$99.99
Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(53)

XTC 6

XTC 6"x9" Speaker Baffles

Protect your speakers (Slim-line: 3-3/4" depth)

Item #: 237XT92

(34)

$8.99
Add to Cart
Metra Female Quick Slides

Metra Female Quick Slides

An assortment of female quick slide connectors for connecting to speaker terminals

Item #: 120FQS10PK

(51)

Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
S&G Tool Aid 87615

S&G Tool Aid 87615

Window and Door Clip Removal Tool

Item #: 18187615

(12)

S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench

Spec Tools SQR-200a Squeeze Wrench

Narrow space ratchet kit with 18 sockets

Item #: 180SQR200A

(1)

$49.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(3)

$29.99
Add to Cart
Posi-Products™ Car Speaker Connectors

Posi-Products™ Car Speaker Connectors

8 connectors for installing car speakers

Item #: 669PP502

(20)

$11.99
Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(8)

$24.99
Add to Cart