About the Infinity ERS HV250
Get enveloping surround sound without cluttering your room with bulky speakers. The ERS HV250, sold individually is ideally suited for home theater, and installs directly in your wall so it doesn't take up even a single inch of floor space. It can be positioned horizontally for use as a center channel speaker, or vertically for front and surround speakers. Get up to seven ERS HV250s and an Infinity powered subwoofer for a complete voice-matched home theater speaker system.
This high-performance in-wall speaker features a 3/4" tweeter, plus dual 5" woofers for clean bass response down to 45 Hz. All of the drivers are made with Infinity's exclusive Ceramic Metal Matrix Diaphragm (C.M.M.D.™) material. C.M.M.D. woofers and tweeters are stiff yet responsive for warm, resonance-free performance across the entire audio spectrum. It's the same driver material used on Infinity's flagship Prelude™ loudspeakers, costing thousands of dollars a pair.
The ERS HV250 is designed for easy installation. It features mounting clamps that swing out and securely grip your wall from the inside. An optional in-wall bracket is recommended for installing the ERS HV250 in a new home under construction (or in a room that's undergoing major renovation).
Got wire?
Most speakers don't include any. Learn more about in-wall wiring at the Crutchfield Learning Center.
Shop our selection of in-wall speaker wire.
Priced each
Product highlights:
- sold individually
- frequency response 45-22,000 Hz (±3dB)
- 3/4" C.M.M.D. tweeter
- dual 5" C.M.M.D. woofers
- handles up to 125 watts
- sensitivity 89 dB
- 8-ohm impedance
- acoustical waveguide for wide sound dispersion
- paintable speaker grille
- cutout: 6-3/16"W x 13-15/16"H (for vertical placement)
- mounting depth: 3-7/16"
- warranty: 5 years
- MFR # ERS HV250
What's in the box:
Infinity ERS HV250 owner's manual
- 1 White in-wall speaker
- 1 White grille
- 1 Plastic paint shield
- Cardboard mounting cutout template
- Infinity Logo Sticker
- Owner's Guide
- Warranty information
Customer reviews for Infinity ERS HV250
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity ERS HV250
Features & specs
Features | ||
---|---|---|
Quantity in Package | Single | |
Tweeter | Dome | |
Aimable Tweeter | No | |
Woofer Composition | C.M.M.D. | |
Woofer Surround | Rubber | |
Connector Type | Post | |
Bi-Amp Inputs | No | |
Built-in Back-box | No | |
Moisture Resistance | ||
Indoor (Moisture-resistant) | No | |
Outdoor (Partial Exposure) | No | |
Outdoor (Full Exposure) | No | |
Specs | ||
Tweeter Size | 0.75 | |
Midrange Size | --- | |
Woofer Size | 5 | |
Speaker Shape | 6.1875 x 13.9375 | |
Cutout Width | --- | |
Cutout Height | --- | |
Mounting Depth | 3.386 | |
Power Range (Watts) | up to 125 | |
Sensitivity | 89 dB | |
Impedance (Ohms) | 8 | |
Frequency Response | 45-22kHz | |
Parts Warranty | 5 Years | |
Labor Warranty | 5 Years |
Product Research
Features
Ceramic Metal Matrix Diaphragm (C.M.M.D.): Infinity's C.M.M.D. technology delivers accurate performance with dramatically reduced distortion for incredibly lifelike sound. Additionally, the C.M.M.D. drivers can withstand extreme temperatures, moisture, humidity and sunlight.
Woofers: The 5" C.M.M.D. cone woofers virtually eliminate coloration due to cone flexing, resulting in less distortion and superior accuracy. For a smoother response and improved durability, each woofer uses a rubber surround.
Tweeter: The speaker has a 3/4" C.M.M.D. dome tweeter that offers superior stiffness and damping compared to traditional metal domes.
Waveguide Design: The ERS HV250 incorporates a proprietary waveguide design to ensure smooth distribution of sound throughout the listening area.
Mounting Options
Installation: The speaker requires a cutout of 13.9375" by 6.1875", with a depth of 3.386" (including the thickness of the drywall). Once the hole is cut, the speaker can be dropped in and the locking tabs can be tightened, allowing you to secure the speaker to the drywall without any extra assembly.
Note: For new construction, you will need to purchase the optional rough-in-frame kit (item 108IW55RIF).
Paintable: The grille and flange can be painted, allowing this speaker to match any decor.
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Just what I was looking for. Looks and Sounds Great. Even the wife agrees! Cutting a 12 by 7 inch hole in the wall can be alittle intimidating, but follow the pattern an find your studs and it will turn out great.
Kevin from Jax,FL