1.888.955.6000
crutchfield.com
Crutchfield

Infinity Kappa 10.11t

3/4" soft dome tweeters

Zoom
  • Infinity Kappa 10.11t

    Front

Crutchfield OMC logo
You'll have to custom-mount tweeters or midrange speakers, which usually requires drilling holes and running new wires.
 

Our take on the Infinity Kappa 10.11t

by John Pollard
Infinity

Legendary sound

Infinity's Kappa 10.11t 3/4" tweeters continue in the tradition of this legendary line of speakers, bringing you impressive sound quality. Once installed, these tweeters will bring out every nuance and detail in your favorite music tracks, making time spent in your car seem more like a concert than a commute.

Large soft dome tweeters

If you're looking for natural-sounding high frequencies, these edge-driven 3/4" soft dome tweeters are a great candidate for your system. The edge-driven" design creates a larger tweeter that handles more power and delivers smooth response way down into frequencies not covered by smaller "W"-shaped domes. You'll hear a more clearly defined soundstage where you can picture the placement of every instrument.

Read more

Infinity includes hardware for surface- or flush-mounting the tweeters, plus Starfish brackets that help you install the tweeters in many factory tweeter openings. The included external crossovers send the appropriate frequencies to the tweeters to protect them from damage.

Great for any system

These 2-ohm tweeters are sensitive enough that you can power them with an aftermarket stereo, but you'll get your best results feeding them plenty of power from an outboard amp — up to 50 watts RMS.

Highlights:

  • 3/4" soft dome tweeters
  • 2-ohm impedance
  • flush- and surface-mount hardware included
  • Starfish™ bracket for mounting in factory tweeter locations
  • outboard computer-optimized crossovers
  • power handling: 5-50 watts RMS (150 watts peak power)
  • frequency response: 3,500-35,000 Hz
  • sensitivity: 93 dB
  • flush-mount depth: 3/4"
  • warranty: 3 years
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
General
Tweeter Design 3/4" Dome
Tweeter Composition Textile
Parts Warranty 3 Years
Labor Warranty 3 Years
Specifications
Sensitivity 93 dB
Frequency Response 3500 - 35k Hz
High-Pass Crossover Frequency ---
RMS Power Range (Watts) 5-50
Peak Power Handling (Watts) 150
Impedance (Ohms) 2
Top-mount Depth (Inches) 3/4
Cutout Diameter or Length (inches) 1 15/16
Product Research
What's in the box?

Download owner's manual

  • 2 Tweeters (6" wire attached)
  • 2 Crossovers
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Starfish tweeter mounts
  • Six 3/8" Flat head screws
  • Two M4x10mm Machine screws
  • 2 Washers
  • 2 Adhesive backed tweeter grille badges
  • Instructions

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features

Edge Driven: The 3/4" edge-driven tweeters use textile soft domes. An edge-driven tweeter has better dispersion characteristics and allows for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity.

Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:

  • I-Mount Tweeter Mounting System: The tweeters can be surface or flush mounted with Infinity's innovative I-Mount system:
    • Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
    • Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount adapter and plastic locking nut. Once a cutout is made, the flush-mount adapter (with the tweeter installed) is inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
  • Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
    • Surface Mount (behind grille panel)
    • Flush Mount (behind grille panel)
    • Bottom Mount (to grille panel)
    • Flush Mount (in-dash location)

Tweeter Mounting Dimensions:

  I-Mount Surface Mount I-Mount Flush Mount Starfish Surface Mount (behind grille panel) Starfish Flush Mount (behind grille panel) Starfish Bottom Mount (to grille panel) Starfish Flush Mount (in-dash location)
Mounting Height 0.936" 0.638" 0.940" 0.417" 0.0" 0.063"
Depth 0.326" (screw depth) 0.705" 0.326" (screw depth) 0.523" 1.075" 1.012"
Frame Diameter 1.615" 2.218" 1.653" 2.413" 3.268" 3.268"
Cutout Diameter N/A 1.894" N/A 1.653" N/A 2.825"

Crossover Connections: The crossovers have screw terminal inputs and outputs and will accommodate bare wire or spade connectors up to 0.325" wide.

Crossover Dimensions:

  • Length: 2.406"
  • Width: 1.182" (1.576" including mounting tabs)
  • Height: 1.008"

Power Handling: Although Infinity lists the RMS power handling as 50 watts, they also list the recommended power range as 5-75 watts RMS. We've opted to list the more conservative 50 watt RMS figure on the specifications page.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Infinity Kappa 10.11t Reviews

Average Customer Review:

9 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Excellent sound

Written By PickyAudiophile, Vancouver, WA on Tuesday, September 23, 2014
Crutchfield Customer Review (What's this?)
 
Great crossovers, so I don't have to worry about them over played. I added this pair to an existing Kappa system and mounted them high above me. I am just immersed in crystal clear sound. Love it.
Pros:
Soft dome, so they aren't harsh. Great quality. Great sound.
Cons:
Not the cheapest on your wallet!
Was this review helpful?    Yes | No
 
5 out of 5

kappa tweeters

Written By chucksrevenge, south lyon mi. on Wednesday, May 07, 2014
Crutchfield Customer Review (What's this?)
 
added that extra excitement to the rest of my infinity speaker system can't wait to get sub in the mix
Pros:
great transparentsee to the high end
Cons:
none so far
Was this review helpful?    Yes | No
 
5 out of 5

infinity kappa 10.11t review

Written By gklue17, Indialantic, fl on Monday, May 05, 2014
Crutchfield Customer Review (What's this?)
 
awesome sound!
Was this review helpful?    Yes | No
 
4 out of 5

Good but not great

Written By bdubs504, New Orleans, LA on Sunday, February 16, 2014
Crutchfield Customer Review (What's this?)
 
I'm still getting used to these tweeters. They have good, clean, crisp sound, with little distortion, but their output/volume is low compared to other tweeters I've had. Tweeters, per se, are not supposed to be "loud," necessarily, but these are soft even for what I expected. Otherwise, I like the way they balance out the mids/lows, creating a fuller, more enjoyable sound stage.
Pros:
Crisp, clean, clear
Cons:
Low output
Was this review helpful?    Yes | No
 
5 out of 5

Satisfied Customer

Written By J.R.#3, Delano , CA on Monday, November 25, 2013
Crutchfield Customer Review (What's this?)
 
I am completely satisfied with this product. I have the pleasure of enjoying the performance promised by the product's manufacturers beyond my expectations and expect to never have to replace these tweeters any time soon unless the model to come of course promises better performance.
Pros:
Size and applicability.
Cons:
None
Was this review helpful?    Yes | No
 
5 out of 5

Infinity Kappa 10.11t tweeters

Written By Hal, Georgia on Sunday, November 17, 2013
Crutchfield Customer Review (What's this?)
 
I purchased these to upgrade my 2011 Chevy Silverado "post" mounted factory speakers, which were very shrill sounding. I was able to remove the old factory speakers and install the new ones using double sided tape. I am very pleased with the results. Extremely clean sounding. Gives a distinctive brightness that my system did not have. I can now hear sounds that I never knew were there. I changed out the door speakers with the 2ohm Infinity Kappa speakers. Coupled with a Clarion 4 channel class D compact amp and Clarion EQ from Crutchfield, All I can say is what a difference.
Pros:
Very high quality. Comes with a variety of surface and flush mounting options. High quality crossover included.
Cons:
A little pricey but well worth the money spent.
Was this review helpful?    Yes | No
 
4 out of 5

Infinity kappa tweeter

Written By Chad, Pa on Thursday, October 17, 2013
Crutchfield Customer Review (What's this?)
 
Overall very good sound install a lot of customizing but well worth money spent installed in stock location in 05 tuscon no cutting just mods to speaker mount on backside.
Pros:
Exactly same size as originals
Cons:
Mount altering and wiring ( had to use original plug from factory ones )
Was this review helpful?    Yes | No
 
5 out of 5

Infinity Kappa 10.11t

Written By JayR, Rochester.NY on Monday, May 13, 2013
Crutchfield Customer Review (What's this?)
 
I useed them to replace blown Jeep tweeters in 1998 Grand Cherokee. I used origional mounting plates and altered them a little for the Kappa's. Easy swap and sound better than expected. I'm happy
Pros:
Small and shallow. Fit in a small recess. Cross over is also small and fit under dash trim.
2 out of 2 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Infinity Kappa 10.11t

Written By AlexL, Plymouth, MA on Thursday, April 18, 2013
Crutchfield Customer Review (What's this?)
 
I didn't end up using them and instead returned them due to ordering the wrong size, but returning was extremely easy and customer service is amazing!
1 out of 4 people found this helpful
Was this review helpful?    Yes | No
 

1 question already asked

Will these fit on a 2005 4runner? I want to replace factory front door tweeters. Already have Kenwood HU, Infinity Kappa front speakers, Infinity Bass Link, and Rockford Fosgate rear speakers [ Rey  Dec 15, 2013 ]
1 answer
  • For information on replacing the factory tweeters please contact an Advisor by phone or online chat. They will be able to pull up your vehicle and see if we have install information for the front door tweeters in your vehicle. [ Jeff Staff  Dec 16, 2013 ]

Add accessories for the Infinity Kappa 10.11t

You may need speaker wire to get the signal to your tweeters. It's sold by the foot, so enter the amount you'll need when you get to your cart. See all categories & accessories

T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
13 people say
Your Price: $0.69
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
49 people say
Your Price: $0.39
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
29 people say
Your Price: $1.99
Add to Cart
Dynamat 10415 Xtreme Speaker Kit Two 10-in. x 10-in. Sheets
45 people say
Your Price: $26.99
Add to Cart
Dynamat 10435 Xtreme Door Kit With four 12" x 36" sheets — covers two doors
31 people say
Your Price: $99.99
Add to Cart
Dynamat SuperLite Tri-Pak Triple package — 3 sheets, 12 square feet (Model #10612)
17 people say
Your Price: $69.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
52 people say
Your Price: $24.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
15 people say
Your Price: $19.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
31 people say
Your Price: $12.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87615 Window and Door Clip Removal Tool
12 people say
Your Price: $7.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
67 people say
Your Price: $9.99
Add to Cart
Pro.Fit Hook Tool Set Installation tools — pair
9 people say
Your Price: $6.49
Add to Cart
Pro.Fit Trim Panel Tool Remove your vehicle's trim panels without damage
87 people say
Your Price: $5.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
8 people say
Your Price: $49.99
Add to Cart
Spec Tools SQR-200a Squeeze Wrench Narrow space ratchet kit with 18 sockets
1 person says
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart
Posi-Products™ Car Speaker Connectors 8 connectors for installing car speakers
18 people say
Your Price: $11.99
Add to Cart
DEI Heat Shrink Tubing Black 4-foot length (Assortment)
6 people say
Your Price: $24.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $20.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Infinity Kappa 10.11t, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_108K1011T/Infinity-Kappa-10-11t.html ).