Crutchfield - North America's electronics authority since 1974

1.888.955.6000
 
 
Free Shipping on Everything.  60-Day Money-Back Guarantee  |  Lifetime Tech Support
 

Infinity Reference 5760a

6-channel car amplifier: 56W x 4 + 107W x 2

Zoom Infinity Reference 5760a
Front
Video loading and will display in just a moment.
Photos
Infinity Reference 5760a Infinity Reference 5760a Infinity Reference 5760a Infinity Reference 5760a
 
Videos
 
We don't check this item for fit or compatibility.

Item# 108R5760A offer details

 
DISCONTINUED
 
This item is no longer available to purchase.
 
Contact us for other options
 
Call   Email  
 
In-stock Alternative
 
 
 
 
Infinity

Our take on the Infinity Reference 5760a

Whether you're building a component system, powering a pair of full-range speakers, or just pounding away with a subwoofer, there's an Infinity Reference series amp ready to take on the job. Boasting impressive power ratings and fine-tuned controls, these amplifiers are capable of sending your music to new sonic heights.

It's all thanks to high-output MOSFET power supplies — which ensure maximum power delivery to your speakers for efficient operation — and variable filters that let you contour the output to fit your music. And, since every Infinity Reference amplifier is CEA-2006 compliant, you'll know that you'll get the power as advertised.

Looking for an amplifier that's flexible enough to power the system you want? It's hard to go wrong with the Infinity Reference 5760a 6-channel amp. Four channels of 56 watts RMS drive all your full-range or component speakers, while two subwoofer channels (107 watts RMS x 2, or 287 watts x 1 in bridged mode) take care of your low-frequency needs. Grab hold of the optional wired remote and make level adjustments to the subwoofer channels right from your dash. This is one amp that you'll never outgrow.

Get more info on this product

Highlights:

  • 56 watts RMS x 4 + 107 watts RMS x 2 at 4 ohms (CEA-2006 Compliant)
  • 80 watts RMS x 4 + 150 watts RMS x 2 at 2 ohms
  • 56 watts RMS x 4 + 287 watts RMS x 1 in 5-channel mode
  • 148 watts RMS x 2 + 287 watts RMS x 1 in bridged mode
  • 3-, 5-, or 6-channel output
  • variable high-/low-pass filters on front and rear channels, low-pass only on sub channels (32-320 Hz, 12 dB/octave)
  • variable Bass EQ on sub channels only (0-12 dB @ 50 Hz)
  • requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
  • preamp- and speaker-level inputs
  • optional wired level control
  • fuse rating: 30A x 2
  • 19-7/8"W x 2-11/16"H x 12-1/8"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
 

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs

Features and Specs
Performance
RMS Power Output (Watts x Channels)
Loading...
56 x 4
107 x 2
Peak Power Output (Watts x Channels)
Loading...
N/A
Power at 2 Ohms (Watts x Channels)
Loading...
80 x 4
Bridged Power (Watts x Channels)
Loading...
148 x 2
Minimum Impedance Bridged
Loading...
4
Minimum Impedance Unbridged
Loading...
2
Best Frequency Response
Loading...
10-57k Hz
THD at Rated RMS Power
Loading...
1%
Signal to Noise Ratio
Loading...
82 dB
Input Voltage
Loading...
14.4v
Features
Amplifier Class
Loading...
AB
Low-Pass Crossover Frequency
Loading...
32-320 Hz
Low-Pass Slope (dB/octave)
Loading...
12 dB
High-Pass Crossover Frequency
Loading...
32-320 Hz
High-Pass Slope (dB/octave)
Loading...
12 dB
Bass Boost
Loading...
0-12 dB
Bass Boost Frequency
Loading...
50 Hz
Fan Cooled
Loading...
No
Fuse Rating
Loading...
30 x 2
Speaker Level Inputs
Loading...
Harness
Preamp Outputs
Loading...
No
Width (inches)
Loading...
21-1/16
Height (inches)
Loading...
2-11/16
Depth (inches)
Loading...
12-1/8
Parts Warranty
Loading...
1 Year
Labor Warranty
Loading...
1 Year

Product Research

Product Research
What's in the box?

Download owner's manual

  • 6-Channel amplifier with two installed 30A ATC fuses
  • Two 11" speaker-level input harnesses
  • Two 30A ATC fuses
  • 4 Self-tapping screws
  • 1 Silica gel packet
  • One 8" x 2-1/2" Infinity sticker
  • Instructions
  • Amplifier Quick Start Guide
  • Warranty card

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Inputs and Outputs Notes

Features

Status LEDs: The amplifier has the following status LEDs:

  • Clip: indicates the amplifier is being overdriven, and your speakers may be in danger. This should blink only on musical peaks, and not be on constantly.
  • Power: indicates the amplifier is on
  • Protect: indicates any of the following problems: DC voltage on amplifier output, overheating, under voltage, over voltage, and short circuit in the speakers or wire

Variable Filters: The front, rear, and sub channels have separate filters. The front and rear channel filters can be set for low-pass, high-pass, or full-range operation. The sub channel filter is low-pass only. Each filter can be adjusted from 32 to 320 Hz. In each case, the filter has a slope of 12 dB per octave.

Bass Boost: For added low frequency performance, the sub channels have a 0 to 12 dB variable bass boost centered at 50 Hz.

Sub Channel Input: The sub channels have a mode switch that can be set to one of the following options:

  • External Input: use this mode when sending a dedicated signal to the subwoofer inputs
  • Internal Input: use this mode to send a signal from the front and rear inputs to the subwoofer; this is useful if your receiver does not have dedicated subwoofer outputs

Remote Level Control Compatible: The optional 100rc wired remote level control allows you to adjust the bass level from anywhere in the vehicle.

Inputs and Outputs Notes

Right Side of Amplifier:

  • +12V (power): 0.357" screw terminal
  • Remote: 0.357" screw terminal
  • GRD (ground): 0.357" screw terminal
  • Speakers: 0.336" screw terminals

Left Side of Amplifier:

  • Front High Level Input: 4-pin jack for use with supplied speaker-level input harness
  • Rear High Level Input: 4-pin jack for use with supplied speaker-level input harness
  • Remote Level Control: RJ-11 jack for use with the optional 100rc wired remote level control
 

Product Reviews

Be the first to review this product.

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Review title
* Email
Your email won't be visible
Display name
(e.g., JohnD) Your review will be signed using the display name and location
* Your location
(e.g., Charlottesville, VA)
* Your rating
Click on a star to rate the overall product on a scale of 1-5
1500 characters left * Your review
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
Submit the URL of your YouTube™ video review or product demonstration. e.g., http://www.youtube.com/v/o79TWHh598U
500 characters left Pros
500 characters left Cons
* Agree to Terms
By checking this box you agree your review becomes the property of Crutchfield, that you are over 18 years of age, that you own or have owned this product, and that you are located within the United States or its territories. Please see our Review Guidelines for more information. We reserve the right (but are not obligated to) review all submissions and edit or remove any review in any manner which we deem necessary. Your review should be posted within seven days.
Share this product

Learn more about All Car Amplifiers

Learn more about All Car Amplifiers

Car Amplifier Shopping Guide

Car Amplifier Shopping Guide

Ken Nail
10/20/2011
based on 399 ratings (21 comments)
 

If you want your music to be loud, amplifiers are definitely part of the picture. But an amp can do much more than just get other people's attention.

 
Everything About Subwoofers from A to Z

Everything About Subwoofers from A to Z

Buck Pomerantz
9/16/2011
based on 21 ratings
 

When planning a bass system, customers ask every day about where they should start. Doing it properly takes some planning and forethought, especially if you're starting small and intend to expand...

 
Video: Car Amplifier Power

Video: Car Amplifier Power

Zak Billmeier, Ken Nail
9/2/2009
based on 26 ratings (4 comments)
 

We describe the basics of deciding how much power an amplifier should have when you're trying to match it to your speakers or subwoofers.

 
Video: Car Amplifier Channels

Video: Car Amplifier Channels

Zak Billmeier, Ken Nail
11/17/2009
based on 223 ratings (9 comments)
 

One of the first steps in choosing an amplifier for your car audio system is to decide how you intend to use the amplifier, and thus how many channels it should have. This short video gives you a...

 
Video: Car Amplifier Build Quality

Video: Car Amplifier Build Quality

Zak Billmeier, Ken Nail
9/2/2009
based on 7 ratings (4 comments)
 

If you can get the same amount of power from two different amplifiers, is there any reason to buy the higher-priced amp? What are you getting for that extra money? We'll discuss the differences in...

 

Accessories

Things you'll need

Stereo Patch Cables
Patch cables take the music from your stereo to the amplifier. Most amp wiring kits don't include them.
StreetWires Zero Noise 5 Stereo Patch Cables
High-performance cables with superior noise rejection (16.4-foot)
$29.99
In Stock
 
 

Extras

Test Discs
Tune your system like a pro with Test CDs.
Autosound 2000 Disc One
Low Frequency Test CD (Disc One)
$19.99
In Stock
 
 
Professional Installation
Have your new amplifier put in by a qualified professional in your area.
InstallCard: Amp or Equalizer
Prepaid professional amplifier or EQ installation
 
 
Add selected to cart
 

For a more in-depth review and enhanced detailed information on the Infinity Reference 5760a, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_108R5760A/Infinity-Reference-5760a.html ).

Infinity Reference 5760a