About the Infinity Reference X REF-6502ix
Designed for more clarity
Designed for more clarity
Do you want to hear the details you've been missing in your car's sound system? You'll enjoy exceptional clarity from Infinity's Reference X Series REF-6502ix 6-3/4" speakers. Infinity's UniPivot design allows you to aim each textile dome tweeter toward your ears, so you enjoy excellent stereo imaging even if the speakers are mounted way down low in your doors. Each tweeter features a level control switch so you can boost the brightness to your taste.
Larger woofer for more bass
The REF-6502ix appeals to bassheads too, with tough polypropylene woofers and durable hi-roll rubber surrounds that deliver strong low-frequency performance. Each Plus One+ woofer sports a significantly larger cone than speakers of similar size, adding plenty of punch to the speaker's smooth and accurate highs.
Great for any power supply
You can power these speakers with up to 60 watts of RMS power — they'll work great with an external amplifier, but they're also sensitive enough to be a good match for a factory or aftermarket stereo. Plus, Infinity comes up with a safe way to get a little more power out of your system — these 3-ohm speakers combine with the speaker wire in your car so your car stereo sees actual 4-ohm impedance. Grilles are included along with Infinity logo badges that can be attached to your factory grilles.
Note: Infinity describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Product highlights:
- 6-3/4" 2-way car speakers
- Plus One+ polypropylene woofer cone with hi-roll rubber surround
- 1" edge-driven, textile dome tweeter
- included brackets allow mounting in a variety of 6-3/4" and 6-1/2" openings
- True Four Ohm Impedance technology: speaker's 3-ohm impedance combines with speaker wire impedance for a 4-ohm load
- compatible with virtually all factory or aftermarket car stereos
- power range: 5-60 watts RMS (180 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 93 dB
- top-mount depth: 2-1/16"
- warranty: 1 year
- MFR # 6502ix
What's in the box:
Infinity Reference X REF-6502ix owner's manual
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- 2 Plastic mounting rings (Chrysler/GM)
- Eight 1" Self-tapping screws
- Eight 1/2" Self-tapping screws
- 8 Speed clips
- 2 Adhesive backed foam gaskets
- 2 Infinity logos
- Template on box
- Owner's manual (English/ Danish/ German/ Spanish/ Finnish/ French/ Italian/ Dutch/ Polish/ Portuguese/ Russian/ Swedish/ Turkish/ Chinese)
Customer reviews for Infinity Reference X REF-6502ix
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Reference X REF-6502ix
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Edge-Driven Dome | |
Impedance (Ohms) | 3 | |
Tweeter Composition | Textile | |
Woofer Composition | Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 93 | |
Frequency Response | 53 - 21k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 2 1/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 1/16 | |
Mounting Height (Inches) | 0.8 | |
Frame Width | 6.215 | |
Frame Length | 6.215 |
Product Research
Features
Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and increased efficiency.
Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Textile Dome Tweeters (UniPivot Design): Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. The UniPivot design mounts the tweeter at an angle and pivots, so the tweeter can be pointed at the listeners, optimizing the stereo image for a more uniform response. The tweeter housing can be turned approximately 315 degrees.
Tweeter Level Control: A switch on the front of the tweeter allows you to boost the tweeter output to +3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.
True Four Ohm Impedance Technology: The speaker's 3-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected head unit or amplifier.
Power Handling: Although Infinity rates the 6502ix speakers at 60 watts RMS (continuous average), they also recommend amplifiers with a power rating from 5 to 125 watts RMS.
Mounting: Without an adapter, the 6502ix speakers fit standard 6-3/4" applications. Given their required cutout, they will also fit standard 3-hole 6-1/2" and 4-hole 6-1/2" applications without an adapter, but new screw holes must be drilled. Using the included adapter brackets they can be mounted in a variety of 6-1/2" and 6-3/4" applications, without any modification.
The Infinity Reference X REF-6502ix replaces these items
Infinity Reference 6032cf
- Plus One+ polypropylene woofer with rubber surround
- 1" UniPivot edge-driven
- textile dome tweeter
- 2-60 watts RMS power range
Infinity Reference 6032si
- Plus One+ polypropylene woofer with rubber surround
- 1" edge-driven
- textile dome tweeter
- 2-50 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Very easy to install. Sound much better than I imagined. Very clean and accurate response. No harshness to them at all. Very pleased. Also, this was a recommendation from Crutchfield - I agree with their recommendation.
Garys from Chattanooga, TN