Chat
Contact us
Close contact box
Connect ID #
255 407 387 4
Connect ID #
255 407 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

JBL GTO19T 3/4" soft-dome tweeters

Item # 109GTO19T

It's an emergency situation, the tweeters in your current system have blown out.

Find what Fits your vehicle

Remove

Checking fit...

It's an emergency situation, the tweeters in your current system have blown out.

1 question - 1 answer

Item # 109GTO19T

About the JBL GTO19T

Alexander H.

Tweeters! Stat!

It's an emergency situation, the tweeters in your current system have blown out. They need replacement immediately, and an upgrade only makes sense. JBL's GTO19T tweeters are prime candidates, with an edge-driven soft-dome design that enhances sound dispersion and delivers natural-sounding highs. Super-compact inline crossovers send the appropriate frequencies to these JBLs, making them just a little bit easier to install.

Tweeters! Stat!

It's an emergency situation, the tweeters in your current system have blown out. They need replacement immediately, and an upgrade only makes sense. JBL's GTO19T tweeters are prime candidates, with an edge-driven soft-dome design that enhances sound dispersion and delivers natural-sounding highs. Super-compact inline crossovers send the appropriate frequencies to these JBLs, making them just a little bit easier to install.

Power on

These tweeters can handle up to 45 watts RMS, so you can add them to just about any system. Their 3-ohm impedance safely draws a little more power from your radio or amp, while their exceptional efficiency delivers strong volume and detail with as little as 5 watts RMS.

The hardware

No matter how complicated your car's interior, JBL's versatile I-mount and Starfish mounting hardware gives you plenty of options for flush- or surface-mounting these tweeters. Whether you're replacing burned-out tweeters or adding tweeters to brighten up a dull-sounding system, these JBLs will add detail and dimension to your music.

Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.

READ LESS

Product highlights:

  • two 3/4" soft dome tweeters with built-in crossover networks
  • flush- and surface-mounting hardware included
  • power handling: 5-45 watts RMS (135 watts peak power)
  • frequency response: 2,500-21,000 Hz
  • sensitivity: 93 dB
  • impedance: 3 ohms
  • top-mount depth: 13/16"
  • warranty: 1 year
  • MFR # GTO19T

What's in the box:

  • 2 Tweeters (each with 6" wire attached)
  • Two 60" Lengths of speaker wire with in-line crossovers
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Starfish mounts
  • Six 5/8" Self-tapping flat head screws
  • 2 Washers
  • 2 Nuts
  • 2 JBL logos
  • Template on box
  • Owner's manual

Customer reviews for JBL GTO19T

Loading reviews...

Average review:

5.0 out of 5 stars
16 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the JBL GTO19T

Pat M.

Features & specs

General
Speaker Size 3/4
Design 1-way
Tweeter Design 3/4" Dome
Impedance (Ohms) 3
Tweeter Composition Fabric
Woofer Composition ---
Woofer Surround ---
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 93
Frequency Response 2500 - 21k Hz
Minimum RMS Wattage 5
Maximum RMS Wattage 45
Peak Power Handling (Watts) 135
Top-mount Depth (Inches) 0 13/16
Bottom-mount Depth (Inches) 1
Cutout Diameter or Length (inches) 1 5/8
Mounting Height (Inches) 0.626
Frame Width 1.846
Frame Length 1.846

Product Research

Features

FRP Frames: The fiberglass-reinforced plastic (FRP) frames used in the GTO series speakers resist warping, even when mounted on uneven surfaces. The nonmagnetic carbon composite has no impact on the motor structure and the plastic doesn't resonate.

Mounting: The edge-driven soft dome tweeters can be mounted several different ways using the included hardware:

  • I-Mount System: The tweeters can be surface- or flush-mounted with JBL's I-Mount system:
    • Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
    • Flush Mount: Once a cutout is made, the tweeter is installed in the flush-mount adapter, then into the flush mount housing and inserted into the hole. The large plastic locking nut is threaded onto the housing (from behind the mounting surface) to hold the assembly securely in place. When flush mounted, the tweeters may be angled for optimum imaging.
  • Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
    • Bottom Mount: Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
    • Surface Mount: Once the Starfish bracket is trimmed, it is screwed to the top of the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
    • Flush Mount: There are two sets of tabs to flush mount the tweeter in the Starfish bracket, yielding different mounting dimensions. The upper tabs mount the tweeter completely below the opening and are glued in place. The lower mounting tabs are screwed in place and result in a mounting height just under a half inch. Once the bracket is mounted, the tweeter is inserted into the bracket and locked into place.

Mounting Dimensions:

  I-Mount Surface Mount I-Mount Flush Mount Starfish Bottom Mount Starfish Surface Mount Starfish Flush Mount Starfish Flush Mount (below mounting surface)
Mounting Height 0.845" 0.626" 0.0" 0.835" 0.363" 0.211"
Depth 0.51" (screw depth) 0.788" 0.944" 0.51" (screw depth) 0.475" 0.627"
Frame Diameter 1.482" 1.846" 3.05" 2.446" 2.296" 2.296"
Cutout Diameter N/A 1.586" N/A N/A 1.51" 1.125"

Crossover: The passive crossovers are installed in-line with the included speaker wire. The crossovers' 23-5/8" input wires are not terminated (bare wire on the end). The 33-5/8" output wires are terminated with female quick slides that mate to the terminals on the wire attached to the tweeters. (Including the 2-3/4" crossover length, the wire is 60" total.)

Crossover Dimensions:

  • Width: 2-3/4"
  • Height: 1"
  • Depth: 1"

Loading accessories...

Customer Q&A

1 question already asked

Q
How do you connect this in Toyota Sienna 2015? Factory harness has 4 wires for dash tweeters.
vinayak c  Mar 01, 2016
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connection of the product. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kenneth  Mar 01, 2016 (Staff)

Loading articles...

Compare the sound