About the JBL GTO329
Go for it
Go for it
If you're in the market for new speakers, you've just found a serious contender. JBL created their GTO329 3-1/2" speakers as a hi-fi solution for those who want better sound in their vehicle.
JBL innovation
You'll find JBL's unique Plus One woofer cone design at work here, which expands the diaphragm area of the cone to give you better low-frequency response. Edge-driven soft dome tweeters ensure a rich experience in the upper frequencies, defined by a bright, open quality. These JBLs also offer slightly lower impedance than standard car speakers, so they'll safely draw a little more power from your car stereo, yielding big volume even with low-powered factory radios. But if you want to blast these babies, they'll handle up to 25 watts RMS from an outboard amplifier.
Product highlights:
- 3-1/2" 2-way speakers (pair)
- carbon-injected Plus One woofer cone with butyl rubber surround
- edge-driven silk balanced dome tweeter
- power range: 5-25 watts RMS (75 watts peak power)
- impedance: 3 ohms
- frequency response: 85-21,000 Hz
- sensitivity: 91 dB
- top-mount depth: 1-7/16"
- grilles not included
- warranty: 1 year
- MFR # GTO329
What's in the box:
- Two 2-way speakers
- 2 JBL logo badges
- 2 Adhesive backed foam gasket strips
- Two 150 microfarad capacitors
- Instruction manual
Customer reviews for JBL GTO329
Loading...
Loading reviews...
Average review:
2.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JBL GTO329
Features & specs
General | ||
---|---|---|
Speaker Size | 3 1/2 | |
Design | 2-way | |
Tweeter Design | Balanced Dome | |
Impedance (Ohms) | 3 | |
Tweeter Composition | Silk | |
Woofer Composition | Carbon-injected | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 91 | |
Frequency Response | 85 - 21k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 25 | |
Peak Power Handling (Watts) | 75 | |
Top-mount Depth (Inches) | 1 7/16 | |
Bottom-mount Depth (Inches) | 2 1/8 | |
Cutout Diameter or Length (inches) | 3 1/8 | |
Mounting Height (Inches) | 0.71 | |
Frame Width | 3.54 | |
Frame Length | 3.54 |
Product Research
Features
Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.
Balanced Dome Tweeter: Each speaker has a balanced dome tweeter. A semi-dome tweeter has a dome placed inside a cone. Balanced dome tweeters are semi-dome tweeters with equal reproduction area given the cone and dome portions of the tweeter.
FRP Frames: The fiberglass-reinforced plastic (FRP) frames used in the GTO series speakers resist warping, even when mounted on uneven surfaces. The nonmagnetic carbon composite has no impact on the motor structure and the plastic doesn't resonate.
Crossover: The included capacitors are 1st order crossovers (6 dB/octave); the crossover point is approximately 350 Hz. One capacitor is wired in-line with the positive input of each speaker.
High-Output Design: The 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring, extracting more power from factory (or aftermarket) receivers. This results in clearer, richer sound for the listener.
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...