Looking for loud bass? JBL built this MS Series MS-10SD2 10" subwoofer extra tough, with features like a vented cast aluminum frame and stitched fabric surround that help this sub hit hard and last a long time. This MS sub works equally well in both sealed and ported enclosures, so you can achieve virtually any bass tone you want, from punishing to mellow.

Versatile and powerful
The dual voice coil (DVC) design gives you more flexibility in matching your sub system's total impedance to your amplifier, in order to get maximum efficiency and full power. And speaking of power, the MS-10SD2 takes up to 600 watts RMS, for performance that'll let you really feel your music's pounding beat.

To drive this single subwoofer, we recommend a mono amplifier rated between 450 and 900 watts RMS at 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

Product Highlights:

  • 10" subwoofer with dual 2-ohm voice coils
  • polypropylene cone with stitched tri-laminate fabric surround
  • vented cast aluminum frame
  • power range: 50-600 watts RMS (300 watts per coil)
  • peak power handling: 1200 watts
  • frequency response: 40-400 Hz
  • sensitivity: 87.0 dB
  • top-mount depth: 4-13/16"
  • sealed box volume: 0.78 cubic feet
  • ported box volume: 1.13 cubic feet
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's a component sub and why would I want one?

A component sub is simply a speaker that's designed to reproduce bass once it's installed in a compatible enclosure. Think about the impact of a movie soundtrack in a big theater or even in your own home HDTV setup. A component sub can add the same kind of power to the music in your car. And a car sub is not all about the boom that you hear on a street corner (although that's cool too) - you can pair a component sub with your choice of enclosure to get bass just the way you like it, from tight and punchy to fat and loose. And once you experience music in your car with a well-tuned subwoofer, you'll never go back.

Hands-on research

What's in the box?

Download owner's manual

  • 10" Dual 2 ohm voice coil subwoofer
  • Trim ring
  • Specification sheet
  • Warranty information

Product Research

Features

Vented Cast Aluminum Basket: The vented cast aluminum basket effectively dissipates heat to minimize distortion due to power compression.

Dual 2-ohm Voice Coils: For increased system flexibility, the woofer has two 2-ohm voice coils. When the voice coils are wired in parallel the woofer presents a 1-ohm load; when wired in series, the woofer presents a 4-ohm load.

Sealed Box Volume: JBL recommends a 0.78 cubic foot sealed enclosure.

Ported Box Volume: JBL recommends a 1.13 cubic foot ported enclosure with one port, approximately 3" diameter x 9-7/8" long.

Power Handling: The woofer has two 2-ohm voice coils; each voice coil can handle 300 watts RMS (600 watts RMS total)/600 watts peak (1200 watts peak total).

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

JBL MS Series MS-10SD2 Reviews

Average Customer Review:

1 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
Rate the following specific attributes
  Value
 Sound Quality
 Ease of Use
 "Coolness Factor"
 Build Quality
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

JBL MS Series MS-10SD2

Written By tanker29, modesto, ca on Tuesday, October 18, 2011

Crutchfield Customer Review (What's this?)

I Purchased these subs because i wanted a ported sub that didnt require alot of my airapsce in my honda S2K, ive had jbl subs before and they pounded! so after review i chose these over the jl w1's. im running a pair off a alpine pdx M6 at(600w)rms in a custom molded fiberglass box with facing up. sofar im kind of dissapointed, didnt hit as hard as i expected. good is you dont like over powering bass or just want a little bit of thump but if you want something hard hitting go with something else or a bigger sub!

Get everything you’ll need to enjoy your new JBL MS Series MS-10SD2

We've verified that these enclosures are a good match for this subwoofer.
It's critical to have good wire, and none is included with the sub.
Reduce ambient road noise and your vehicle's "rattles," for better sound inside your car.
These can be useful if you are building a custom box.
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed single 10" subwoofer enclosure (Model BB10-75S)

Item #: 777BB1075S

(14)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed dual 10" subwoofer enclosure (Model BB102-75S)

Item #: 777BB1027S

(18)

$79.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported dual 10" subwoofer enclosure (Model BB102-125V)

Item #: 777BB1021V

(31)

$79.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(52)

Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
Dynamat Xtreme Trunk Kit

Dynamat Xtreme Trunk Kit

5 sheets, 20 square feet

Item #: 15419405

(14)

$169.99
Add to Cart
Dynamat 19100

Dynamat 19100

License Frame Kit

Item #: 15419100

(15)

$14.99
Add to Cart
Dynamat Xtreme Wedge Pack

Dynamat Xtreme Wedge Pack

1 sheet, 4 square feet

Item #: 15410425

(7)

$39.99
Add to Cart
Dynamat Dynaliner

Dynamat Dynaliner

One 54" x 32" sheet (1/8" thick)

Item #: 15411101

(6)

$69.99
Add to Cart
Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCRB

(13)

Metra Box Carpet

Metra Box Carpet

Carpet roll (54" x 5 yards) — available in 3 colors (Black)

Item #: 120TL3015

(24)

$39.99
Add to Cart
Corner Protectors

Corner Protectors

Item #: 1251536

(5)

Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCRS

(6)

Rubber Feet

Rubber Feet

Item #: 125F1692

(4)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCSB

(7)

Springback Handle

Springback Handle

Item #: 125H1051K

(2)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCSS

(7)

Port Tube

Port Tube

3" diameter, 4-1/2" long

Item #: 125M1702

(2)