From the studio to your home

JBL floor-standing loudspeakers deliver studio-quality sound in your home listening environment. The Studio 570 towers take advantage of technology developed by JBL engineers for pro-audio applications, and use it to bring powerful, accurate sound into your living room. Their versatile design makes them equally impressive whether you're watching movies or listening to music. And their modestly sized footprint means you can enjoy their dynamic, full-bodied performance in small- to medium-sized rooms. Pick up a pair for stereo music, or use them as your front left and right speakers in a full JBL Studio home theater setup.

Grille off

High-frequency horn for precise sound

All JBL Studio speakers feature a 1" high-frequency compression driver to achieve lower distortion and wider dynamic range than conventional speaker designs. This tweeter design uses a durable one-piece diaphragm and surround assembly fitted with a 1" voice coil to reproduce sparkling clear highs. Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them toward your ears. JBL places their tweeter inside a flared opening, known as a "horn," which directs sound to the listener with pinpoint accuracy, and helps eliminate reverberations, sound reflections off walls, and other artifacts. JBL's advanced glass-filled ABS bi-radial horn design delivers your movie soundtracks and music with professional-level realism.

Ribbed PolyPlas™ woofers for deep, satisfying bass

The Studio 570 towers use dual JBL 5-1/4" PolyPlas woofer cones to deliver accurate low-frequency sound. The woofer's ribbed design helps improve strength and resist flexing while reducing distortion. JBL wraps all of this driver technology up in a rigid, heavily braced enclosure with non-parallel surfaces to eliminate sound interference and prevent unwanted resonance. The result is tight, articulate bass you can feel as well as hear.

Got wire?

Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.

Product Highlights:

  • frequency response: 45-40,000 Hz (-6dB)
  • recommended amplifier power: up to 150 watts
  • sensitivity: 88 dB
  • impedance: 6 ohms
  • 1" compression driver with neodymium magnet and one-piece Teonex® diaphragm on a glass-filled ABS Bi-Radial® horn
  • dual 5-1/4" PolyPlas™ cast aluminum frame woofers with symmetrical field geometry (SFG) magnet structures and rubber surrounds
  • bass-reflex (ported) design
  • black finish
  • dual gold-plated speaker binding posts (bi-wire capable)
  • port tube inserts included for attenuating bass in the 50-100Hz region to compensate for room placement
  • 8-7/16"W x 34-1/16"H x 11-3/16"D
  • warranty: 5 years
  • Our 60-day money-back guarantee

Floor-standing speakers — still standing tall

Sure, floor-standing tower speakers buck the industry trend toward smaller, visually inconspicuous speakers, but they're hard to beat if great sound is your primary goal. Tower speakers produce powerful sound with excellent bass, making them a great choice for serious music lovers and for folks who want high-impact home theater.

Hands-on research

What's in the box?

Download owner's manual

  • Floor-standing loudspeaker
  • Removable cloth grilles (installed)
  • Horn cover
  • Port tube insert
  • 4 Spiked feet
  • Owner's Manual
  • Warranty sheet

Features and Specs

Enclosure Bass Reflex
Finish Vinyl
Color Black
Tweeter Horn
Tweeter Size (inches) 1
Midrange Size (inches) N/A
Woofer Size (inches) 5.25
Woofer Composition PolyPlas
Woofer Surround Rubber
Built-in Powered Sub No
Video-Shielded Yes
Connector Type 5-way post
Bi-amp Inputs Yes
Parts Warranty 5 Years
Labor Warranty 5 Years
Power Range 150
Frequency Response 45-40,000 Hz
Sensitivity 88 dB
Impedance (Ohms) 6
Amplifier Power ---
Height (inches) 34-3/8
Width (inches) 10-15/16
Depth (inches) 11-1/8
Weight 34.4 lbs

Product Research

Driver Technology
Enclosure Design
Mounting Options

Driver Technology

JBL Studio Series: The JBL Studio 570 floor-standing speaker shares critical design characteristics with the JBL's Professional loudspeakers you find and hear in movie theaters and concert venues. The JBL Studio Series loudspeaker offers dynamic realism & dimensional accuracy that closely duplicates the experience of a movie theater or musical live performance.

Two-Way Floor-Standing Speaker: The JBL Studio 570 floor-standing loudspeaker features two 5.25" low-frequency woofers and a high-frequency compression driver surrounded by a glass-filled Bi-Radial horn; a combination that delivers crisp, focused, dimensionally accurate sound.

High Frequency Compression Driver/Horn System: The JBL Studio 570 floor-standing loudspeaker features a 1" compression driver with a neodyminium magnet and one-piece Teonex diaphragm on a glass-filled ABS Bi-Radial horn.

  • 1" High-Frequency Compressions Driver: The Studio 570 floor-standing loudspeaker's high-frequency compression driver lowers distortion and provides a wider dynamic range than is possible from conventional high-frequency and midrange drivers. The tweeter includes a one-piece Teonex diaphragm/surround assembly fitted with a 1" voice coil that can deliver enhanced vocal articulation.
  • Glass-Filled ABS B-Radial High-Frequency Horn: Horn-shaped loudspeaker designs optimize high-frequency output by directing the sound to the listener with pinpoint accuracy, thereby eliminating reverberations, reflections off walls, and other artifacts. The Studio 570 floor-standing loudspeaker features a glass-filled ABS Bi-Radial high-frequency horn that delivers professional-level sound to your home.

Dual Low Frequency Woofers: The JBL Studio 570 floor-standing loudspeaker features dual PolyPlas cone woofers with Symmetrical Field Geometry (SFG) magnet structures, cast-aluminum frames, and rubber surrounds.

  • Two 5.25" Ribbed PolyPlas Woofers: The Studio 570 floor-standing loudspeaker delivers accurate low-frequency sounds from dual 5.25" ribbed PolyPlas woofer cones. The ribs improve strength while reducing distortion. The result is rich, articulate bass.
  • Symmetrical Field Geometry (SFG) Magnet Assembly: Thanks to a heavy-duty Symmetrical Field Geometry (SFG) magnet assembly, the Studio 570 floor-standing loudspeaker's low-frequency woofer delivers highly focused bass. The result is pristine, articulate sound.
  • Non-Resonant Cast-Aluminum Frame: Each 5.25" woofer features a non-resonant cat-aluminum frame for clean, powerful bass response.
  • Rubber Surrounds: The ribbed PolyPlas woofer cones employs a rubber surround for long cone excursion and extended bass response.

Low-Loss, Two-Way Crossover Network: The Studio 570 floor-standing loudspeaker's low-loss, two-way crossover network ensures a clean transition for sound coming from individual low-frequency and high-frequency drivers, thereby reducing distortion while improving clarity.

Voice Matching: Engineered and voice matched to other speakers in the JBL Studio 5 Series, the Studio 570 floor-standing speaker is powerful, accurate, and styled to make a dramatic design statement in any listening environment.

Enclosure Design

Sturdy 3/4" MDF Enclosure: The JBL Studio 570 floor-standing loudspeaker utilizes a rigid, heavily-braced enclosure with non-parallel surfaces to reduce unwanted resonance.

Bass Reflex Design: The Studio 570 floor-standing loudspeaker employs a bass reflex (ported) design cabinet with a rear-facing bass port that increases output and extends bass response. There is a port tube insert included to decrease the amount of bass output (50Hz-100Hz) from the cabinet.

Detachable Grille: The floor-standing loudspeaker can be used with or without its detachable cloth grille. A plastic cosmetic cover is provided when not using the cloth grille.

Colors: The 570 floor-standing speaker is available in a black or cherry wood-grain vinyl finish (both contain black grilles).


Dual Gold-Plated Binding Posts: The JBL Studio 570 floor-standing loudspeaker will work with various power amplifiers and home receivers, with single single-wire or bi-wire operation. The Studio 570 floor-standing loudspeaker is fitted two sets of gold-plated 5-way binding posts connected by gold-plated jumpers. Using the dual 5-way binding posts, you can bi-amp or bi-wire the speaker. The gold-plated 5-way binding posts will accept bare wire, pin connectors, spade connectors, or banana plugs (single/dual).

Note: Make sure to remove the gold-plated jumpers when bi-wiring/bi-amping the speaker.

Color-Coded: The dual 5-way binding posts terminals are color-coded (red/black) for easy identification between positive and negative.

Mounting Options

Placement: For the best results, place the speakers 6' to 10' apart. Angling the speakers toward the listening position can improve the stereo imaging. The speakers will produce the most accurate stereo soundstage when the angle between the listener and the speakers is between 40° and 60°. Generally, bass output will increase as the speaker is moved closer to a wall or corner. For the best performance, JBL recommends that you place the speakers at least 20" away from the side walls.

Rubber Feet: The JBL Studio 570 floor-standing loudspeaker comes with 4 rubber feet already installed. The rubber feet are used when placing the speaker on a hard surface, such as your hardwood or tile floor.

Metal Floor Spikes: Four metal spikes are supplied for use when you place the floor-standing speaker on a carpeted surface. Using the spikes decouples the subwoofer from the floor and prevents unwanted acoustic damping. The metal spikes add 0.1875" to the height of the speaker. The rubber feet must be removed before installing the spiked feet.

Magnetically Shielded: The speaker is magnetically shielded, allowing you to place it near any television without distorting the picture.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

JBL Studio 570 Reviews

Average Customer Review:

1 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

JBL Studio 570

Written By Anonymous, Ohio on Monday, January 06, 2014

Crutchfield Customer Review (What's this?)

The studio 570 series speakers have just broken in. Probably about 50 hours or so of use. The speakers are very revealing, open and detailed. For the money they are an incredible value. Strings, piano, vocals and horns are very accurate. If you have a large room these will not fill it with bass however. I added a 10" sub and set crossover at 110. Blended nicely and sounds great with tight responsive bass. I drive the system with an HK 990 integrated amp. You won't be disappointed if you purchase. I'm liking JBL!

Pros: 1971 fairway dr uniontown 44685 accuracy.

Cons: Horns can be a bit forward sounding.

Get everything you’ll need to enjoy your new JBL Studio 570

You'll need speaker wire to connect your speakers to your amp or receiver. No wire is included with this speaker.
Add connectors to your bulk speaker wire for a neater, easier, and more reliable installation.
Cut your speaker wire to the exact length you need.
Original Monster Cable

Original Monster Cable

With gold pin connectors (15-foot pair)

Item #: 119OMC1515


Add to Cart
Monster Cable SuperFlat™ Mini

Monster Cable SuperFlat™ Mini

Decor-friendly speaker cable with gold pin connectors (50-foot spool)

Item #: 119SFLM50


Add to Cart
AudioQuest Type 4

AudioQuest Type 4

Speaker cables with pre-attached banana connectors (10-foot pair)

Item #: 703T410BFS


Add to Cart
AudioQuest Rocket 33

AudioQuest Rocket 33

Bi-wire speaker cables with pre-attached banana plugs (10-foot pair)

Item #: 703R33BW10


Add to Cart
Monster Twist-on Mini Banana Connectors

Monster Twist-on Mini Banana Connectors

2 pair, 16-gauge

Item #: 119MTTMH2


Add to Cart
Monster Twist-on Banana Connectors

Monster Twist-on Banana Connectors

2 pair, 12-gauge

Item #: 119MTTRH2


Add to Cart
AudioQuest X2 Speaker Cable

AudioQuest X2 Speaker Cable

14-gauge cable, connectors optional (30 feet, Gray)

Item #: 703X230G


Add to Cart
AudioQuest G2 Speaker Cable

AudioQuest G2 Speaker Cable

16-gauge cable, connectors optional (30 feet, Gray)

Item #: 703G230G


Add to Cart
Monster XPHP™ MKII

Monster XPHP™ MKII

Speaker cable with clear jacket (100 feet)

Item #: 119XPHP100


Add to Cart
Monster XP®

Monster XP®

Speaker cable with clear jacket, connectors optional (100 feet)

Item #: 119XPMS1H


Add to Cart
Monster XP® Navajo White MkII

Monster XP® Navajo White MkII

Speaker cable (50 feet)

Item #: 119XPNWS50


Add to Cart