About the JBL Studio 570
From the studio to your home
From the studio to your home
JBL floor-standing loudspeakers deliver studio-quality sound in your home listening environment. The Studio 570 towers take advantage of technology developed by JBL engineers for pro-audio applications, and use it to bring powerful, accurate sound into your living room. Their versatile design makes them equally impressive whether you're watching movies or listening to music. And their modestly sized footprint means you can enjoy their dynamic, full-bodied performance in small- to medium-sized rooms. Pick up a pair for stereo music, or use them as your front left and right speakers in a full JBL Studio home theater setup.
High-frequency horn for precise sound
All JBL Studio speakers feature a 1" high-frequency compression driver to achieve lower distortion and wider dynamic range than conventional speaker designs. This tweeter design uses a durable one-piece diaphragm and surround assembly fitted with a 1" voice coil to reproduce sparkling clear highs. Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them toward your ears. JBL places their tweeter inside a flared opening, known as a "horn," which directs sound to the listener with pinpoint accuracy, and helps eliminate reverberations, sound reflections off walls, and other artifacts. JBL's advanced glass-filled ABS bi-radial horn design delivers your movie soundtracks and music with professional-level realism.
Ribbed PolyPlas woofers for deep, satisfying bass
The Studio 570 towers use dual JBL 5-1/4" PolyPlas woofer cones to deliver accurate low-frequency sound. The woofer's ribbed design helps improve strength and resist flexing while reducing distortion. JBL wraps all of this driver technology up in a rigid, heavily braced enclosure with non-parallel surfaces to eliminate sound interference and prevent unwanted resonance. The result is tight, articulate bass you can feel as well as hear.
Got wire?
Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.Shop our selection of speaker wire.
Product highlights:
- frequency response: 45-40,000 Hz (-6dB)
- recommended amplifier power: up to 150 watts
- sensitivity: 88 dB
- impedance: 6 ohms
- 1" compression driver with neodymium magnet and one-piece Teonex® diaphragm on a glass-filled ABS Bi-Radial® horn
- dual 5-1/4" PolyPlas cast aluminum frame woofers with symmetrical field geometry (SFG) magnet structures and rubber surrounds
- bass-reflex (ported) design
- cherry finish
- dual gold-plated speaker binding posts (bi-wire capable)
- port tube inserts included for attenuating bass in the 50-100Hz region to compensate for room placement
- 8-7/16"W x 34-1/16"H x 11-3/16"D
- warranty: 5 years
- MFR # STUDIO 570CH
What's in the box:
- Floor-standing loudspeaker
- Removable cloth grilles (installed)
- Horn cover
- Port tube insert
- 4 Spiked feet
- Owner's Manual
- Warranty sheet
Customer reviews for JBL Studio 570
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JBL Studio 570
Features & specs
General | ||
---|---|---|
Enclosure | Bass Reflex | |
Finish | Vinyl | |
Color | Cherry | |
Tweeter | Horn | |
Tweeter Size (inches) | 1 | |
Midrange Size (inches) | N/A | |
Woofer Size (inches) | 5.25 | |
Woofer Composition | PolyPlas | |
Woofer Surround | Rubber | |
Built-in Powered Sub | --- | |
Dolby Atmos Drivers | ||
Connector Type | 5-way post | |
Bi-amp Inputs | Yes | |
Parts Warranty | 5 Years | |
Labor Warranty | 5 Years | |
Specifications | ||
Power Range | 150 | |
Frequency Response | 45-40,000 Hz | |
Sensitivity | 88 dB | |
Impedance (Ohms) | 6 | |
Subwoofer Amp Power | --- | |
Height (inches) | 34-3/8 | |
Width (inches) | 10-15/16 | |
Depth (inches) | 11-1/8 | |
Weight | 34.4 lbs |
Product Research
Driver Technology
Enclosure Design
Connections
Mounting Options
Driver Technology
JBL Studio Series: The JBL Studio 570 floor-standing speaker shares critical design characteristics with the JBL's Professional loudspeakers you find and hear in movie theaters and concert venues. The JBL Studio Series loudspeaker offers dynamic realism & dimensional accuracy that closely duplicates the experience of a movie theater or musical live performance.
Two-Way Floor-Standing Speaker: The JBL Studio 570 floor-standing loudspeaker features two 5.25" low-frequency woofers and a high-frequency compression driver surrounded by a glass-filled Bi-Radial horn; a combination that delivers crisp, focused, dimensionally accurate sound.
High Frequency Compression Driver/Horn System: The JBL Studio 570 floor-standing loudspeaker features a 1" compression driver with a neodyminium magnet and one-piece Teonex diaphragm on a glass-filled ABS Bi-Radial horn.
- 1" High-Frequency Compressions Driver: The Studio 570 floor-standing loudspeaker's high-frequency compression driver lowers distortion and provides a wider dynamic range than is possible from conventional high-frequency and midrange drivers. The tweeter includes a one-piece Teonex diaphragm/surround assembly fitted with a 1" voice coil that can deliver enhanced vocal articulation.
- Glass-Filled ABS B-Radial High-Frequency Horn: Horn-shaped loudspeaker designs optimize high-frequency output by directing the sound to the listener with pinpoint accuracy, thereby eliminating reverberations, reflections off walls, and other artifacts. The Studio 570 floor-standing loudspeaker features a glass-filled ABS Bi-Radial high-frequency horn that delivers professional-level sound to your home.
Dual Low Frequency Woofers: The JBL Studio 570 floor-standing loudspeaker features dual PolyPlas cone woofers with Symmetrical Field Geometry (SFG) magnet structures, cast-aluminum frames, and rubber surrounds.
- Two 5.25" Ribbed PolyPlas Woofers: The Studio 570 floor-standing loudspeaker delivers accurate low-frequency sounds from dual 5.25" ribbed PolyPlas woofer cones. The ribs improve strength while reducing distortion. The result is rich, articulate bass.
- Symmetrical Field Geometry (SFG) Magnet Assembly: Thanks to a heavy-duty Symmetrical Field Geometry (SFG) magnet assembly, the Studio 570 floor-standing loudspeaker's low-frequency woofer delivers highly focused bass. The result is pristine, articulate sound.
- Non-Resonant Cast-Aluminum Frame: Each 5.25" woofer features a non-resonant cat-aluminum frame for clean, powerful bass response.
- Rubber Surrounds: The ribbed PolyPlas woofer cones employs a rubber surround for long cone excursion and extended bass response.
Low-Loss, Two-Way Crossover Network: The Studio 570 floor-standing loudspeaker's low-loss, two-way crossover network ensures a clean transition for sound coming from individual low-frequency and high-frequency drivers, thereby reducing distortion while improving clarity.
Voice Matching: Engineered and voice matched to other speakers in the JBL Studio 5 Series, the Studio 570 floor-standing speaker is powerful, accurate, and styled to make a dramatic design statement in any listening environment.
Enclosure Design
Sturdy 3/4" MDF Enclosure: The JBL Studio 570 floor-standing loudspeaker utilizes a rigid, heavily-braced enclosure with non-parallel surfaces to reduce unwanted resonance.
Bass Reflex Design: The Studio 570 floor-standing loudspeaker employs a bass reflex (ported) design cabinet with a rear-facing bass port that increases output and extends bass response. There is a port tube insert included to decrease the amount of bass output (50Hz-100Hz) from the cabinet.
Detachable Grille: The floor-standing loudspeaker can be used with or without its detachable cloth grille. A plastic cosmetic cover is provided when not using the cloth grille.
Colors: The 570 floor-standing speaker is available in a black or cherry wood-grain vinyl finish (both contain black grilles).
Connections
Dual Gold-Plated Binding Posts: The JBL Studio 570 floor-standing loudspeaker will work with various power amplifiers and home receivers, with single single-wire or bi-wire operation. The Studio 570 floor-standing loudspeaker is fitted two sets of gold-plated 5-way binding posts connected by gold-plated jumpers. Using the dual 5-way binding posts, you can bi-amp or bi-wire the speaker. The gold-plated 5-way binding posts will accept bare wire, pin connectors, spade connectors, or banana plugs (single/dual).
Note: Make sure to remove the gold-plated jumpers when bi-wiring/bi-amping the speaker.
Color-Coded: The dual 5-way binding posts terminals are color-coded (red/black) for easy identification between positive and negative.
Mounting Options
Placement: For the best results, place the speakers 6' to 10' apart. Angling the speakers toward the listening position can improve the stereo imaging. The speakers will produce the most accurate stereo soundstage when the angle between the listener and the speakers is between 40° and 60°. Generally, bass output will increase as the speaker is moved closer to a wall or corner. For the best performance, JBL recommends that you place the speakers at least 20" away from the side walls.
Rubber Feet: The JBL Studio 570 floor-standing loudspeaker comes with 4 rubber feet already installed. The rubber feet are used when placing the speaker on a hard surface, such as your hardwood or tile floor.
Metal Floor Spikes: Four metal spikes are supplied for use when you place the floor-standing speaker on a carpeted surface. Using the spikes decouples the subwoofer from the floor and prevents unwanted acoustic damping. The metal spikes add 0.1875" to the height of the speaker. The rubber feet must be removed before installing the spiked feet.
Magnetically Shielded: The speaker is magnetically shielded, allowing you to place it near any television without distorting the picture.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...