About the Audiovox CMOS2
Audiovox's CMOS2 rear-view camera adds safety and convenience to your vehicle. And with five different mounting options and included hardware, you're sure to find a good spot for installing your camera.
Connect the CMOS2 to your in-dash monitor, and you automatically see what's behind your car or truck when you shift into reverse. The 170-degree wide-angle view gives you a great view of potential trouble spots. The camera comes with a 7-foot cable, so you'll need a composite video cable to route through your vehicle to your in-dash monitor. Warranty: 1 year.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
Product highlights:
- rear-view camera with five different mounting options
- 170-degree wide-angle view
- normal- or reverse-view mode
- warranty: 1 year
- MFR # CMOS2
What's in the box:
- Rear-view camera (with attached 7' power/signal cable)
- 1A AGU fuse (installed on power cable)
- Trim-ring
- Locking-ring
- Slim-angle ring
- Fat-angle ring
- Surface-mount bracket
- Short butterfly mounting bracket
- Long butterfly mounting bracket
- 2 Self-tapping screws
- 2 Machine screws
- 2 Nuts
- 2 Wire-crimps
- Instruction Manual
Customer reviews for Audiovox CMOS2
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Audiovox CMOS2
Features & specs
Features and Specs | ||
---|---|---|
Camera Type | Rear or Front | |
Resolution | 250,920 | |
Parking Guidelines | No | |
Lux Rating | Not given | |
Selectable Views | N | |
Reversed Image | Both | |
Horizontal Viewing Angle | 170 deg | |
Vertical Viewing Angle | Not given | |
Wireless | No | |
Plug type | Composite video |
Product Research
Features
Overview: The CMOS2 5-in-1 high-resolution rear-view camera kit can be installed 5 different ways and will improve your ability to see what is behind your car, SUV, truck, or mini-van.
Composite Video Connector: The camera features a female composite video output jack attached to the camera by a 7' cable. You will need a composite video cable to connect the rear-view camera to your in-dash monitor's composite video camera input.
Adjustable Viewing Mode: The CMOS2 rear-view camera has a selectable image view, Normal or Mirror (cut the Monitor Control wire loop to change the view).
Wide Angle View: The camera lens features a 170-degree wide angle view.
Mounting Options: The CMOS2 camera can mount five different ways - Surface, Drilled, Snap-in, Short Butterfly, or Long Butterfly.
Paintable: The trim of the rear-view camera can be painted any color to match your vehicle's exterior color. The body of the rear-view camera should not be painted.
Power Supply: The CMOS2 features a 7' power/ground lead with an in-line 1A AGU fuse on the power lead. The red power lead hardwires to your vehicle's reverse lamp (+12V) power wire. The black ground lead should be grounded to the metal chassis of your vehicle.
The Audiovox CMOS2 replaces these items
Alpine HCE-C155
- rear-view camera with standard RCA connection
- automatic image adjustment
- wide viewing angle (horizontal 190° and vertical 150°)
Boyo VTK200
- universal rear-view camera
- bolts to your license plate mounts
- 160-degree view
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...