Chat
Contact us
Close contact box
Connect ID #
183 946 387 4
Connect ID #
183 946 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Jensen DUBa2100 2-channel car amplifier — 80 watts RMS x 2

Item # 110DUB2100

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first...

Find what Fits your vehicle

Remove

Checking fit...

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first...

3 questions - 5 answers

Item # 110DUB2100

About the Jensen DUBa2100

Bob Bihlmayer

Jensen + DUB

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first high-efficiency loudspeaker and the first aftermarket car speaker.  Now Jensen has partnered with DUB® magazine, the leading publication in the urban automotive lifestyle market, to introduce DUB Edition speakers and amplifiers which feature DUB-designed cosmetics and co-designed components.

Jensen + DUB

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first high-efficiency loudspeaker and the first aftermarket car speaker.  Now Jensen has partnered with DUB® magazine, the leading publication in the urban automotive lifestyle market, to introduce DUB Edition speakers and amplifiers which feature DUB-designed cosmetics and co-designed components.

Good news for your cruise

The DUB Series DUBa2100 stereo amplifier will send 80 watts RMS to each of your speakers, while its variable frequency filters and bass boost let you zoom in on the sound you want. The DUBa2100 can also be wired to drive a single channel at 235 watts for a 4-ohm load, making it a good choice for driving a subwoofer as well. This Class AB amp uses a MOSFET power supply and high-current output transistors to deliver strong, reliable power, and it features full short-circuit, DC offset, and thermal protection, so the music won't stop until you want it to. And why would you want it to? You've got DUB on the case. 

READ LESS

Product highlights:

  • 2-channel car amplifier
  • 80 watts RMS x 2 at 4 ohms (120 watts RMS at 2 ohms)
  • 235 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • Class AB amp technology
  • variable low-pass filter (40-300 Hz, 12 dB/octave)
  • variable high-pass filter (40-300 Hz, 12 dB/octave)
  • variable bass EQ: 0-12 dB at 45 Hz
  • fuse rating: 25A x 1
  • 8-gauge power and ground leads recommended—wiring and hardware not included with amplifier
  • dimensions: 11-5/16"W x 2"H x 8-1/8"D
  • frequency response: 10-60,000 Hz
  • weight: 4.6 lbs
  • warranty: 1 year
  • MFR # DUBa2100

What's in the box:

  • 2-Channel Class AB amplifier with one 25A ATO fuse installed
  • Spare 25A ATO fuse
  • 2 End caps (installed)
  • 4 Machine screws for end caps (M3 x 6mm)
  • 4 Self-tapping screws (Length=15mm)
  • 4 Flat washers
  • 4 Split lock washers
  • Installation & Operation Manual
  • Performance Certification card

Customer reviews for Jensen DUBa2100

Loading reviews...

Average review:

5.0 out of 5 stars
1 review

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

Product Research

Features
Controls
Connections

Features

Overview: The Jensen DUB Edition amplifiers offer performance and value for your vehicle's sound system. With a MOSFET power supply and high-current Toshiba bi-polar output transistors, the DUB amps provide lots of power and control to give your music impressive punch and clarity. The Class AB design reduces idle current and minimizes distortion.

Power Output: The DUBa2100 2-channel amplifier delivers the following power output:

  • CEA Specifications: RMS power output @ 1% THD+N, 20-20kHz, 14.4 VDC:
    • 80 watts x 2 @ 4 ohms
    • 120 watts x 2 @ 2 ohms
    • 235 watts x 1 bridged mono @ 4 ohms
  • RMS Power Output @ 2% THD+N, 1 kHz, 14.4 VDC:
    • 85 watts x 2 @ 4 ohms
    • 125 watts x 2 @ 2 ohms
    • 240 watts x 1 bridged mono @ 4 ohms

Protection Circuitry: The amplifier features protection circuitry for thermal overload, DC-offset, and short circuits. The LED on the top of the amp glows yellow if a fault is detected.

Pass-thru RCAs: The DUBa2100 has a pair of RCA connectors that allow you to connect additional amplifiers without having to use a Y-adapter. The line output is unfiltered, providing the same signal as the RCA input.

End Caps: The DUB Edition amps include end caps to cover the wiring and controls for a clean installation. The end caps can be painted to match your vehicle, if desired. The end cap brackets can be removed if you wish to install the amp without the end caps.

Controls

Input Level: The DUBa2100's rotary gain control let you match the amp's input sensitivity to the output of the source unit. The input sensitivity range of the amplifier is continuously variable between 400mV and 5V. A small screwdriver (not included) is required to set the gain.

Crossover: The amp features a 12 dB/octave crossover that is adjustable from 40 to 300 Hz. A 3-way switch lets you configure the crossover for high-pass or low-pass operation, or switched to full-range to defeat the crossover.

Bass EQ: The DUBa2100 has a 0 to 12dB bass EQ, centered at 45Hz. This is useful for varying the amount of bass if you're running the amp in bridged mono for a subwoofer. Ported and Bandpass enclosures should be limited to approximately +6dB to +9dB of boost, while sealed enclosures should be able to accept the full +12dB of boost.

Mono/Stereo Switch: The Mono/Stereo switch should be set to Stereo when you have a 2-channel input from the head unit. If there is only a single input from the source unit, you can drive both channels of the amp from the single input by switching to Mono.

Connections

Terminals: The Jensen DUBa2100 uses screw terminals for the +12V power, ground, turn-on (remote) lead, and speaker outputs. The screws can be tightened/loosened with a Phillips-head or flat-head screwdriver (not provided).

Power/Ground: The +12V Power and Ground terminals will accept spade connectors up to 7/16" (0.4375") wide. It is recommended that you use an 8 AWG power wire to the battery, with an in-line 25A fuse installed no more than 18" from the battery terminal. An 8 AWG ground wire (minimum) should be used, and attached to a metal area close to the amplifier.

Remote Turn-On: The Remote screw terminal will accept a spade connector up to 5/16" (0.3125"). Typically, an 18 AWG turn-on lead is included in an amplifier wiring kit.

Low-Level Input: The amplifier is equipped with a pair of RCA inputs for connecting a stereo RCA patch cable from the head unit to the amp. A stereo RCA line output is also provided for daisy-chaining another amplifier without requiring a Y-adapter.

Speaker Outputs: The amp features two positive and two negative screw terminals for connecting two speakers in stereo. To bridge the amp, you should connect the left + and the right - terminal to the speaker. The terminals will accept a spade connector up to 5/16" (0.3125") wide. It is recommended that you use a minimum of 12 AWG wire.

Tri-Mode: The amp is capable of being connected in Tri-Mode to drive a pair of full-range speakers and a subwoofer. A passive Tri-Mode crossover (or capacitors and inductors) should be connected to high-pass the full-range speakers and low-pass the subwoofer.

Loading accessories...

Customer Q&A

3 questions already asked

Q
Hi, how do I wire this to drive one channel?
av3ryfr33m4n  Nov 25, 2015
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the install. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kristina  Nov 25, 2015 (Staff)
Q
I connected the amp of to my car and every time I turn on the car the amp light is yellow and does not work. What does that mean?
joel  Oct 12, 2015
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kristina  Oct 12, 2015 (Staff)
Q
Will this work with my infinity 62.11i speakers I just bought from here? Or is this amp too powerful or not powerful enough? I would only use it to connect the pair of speakers
joel  Oct 05, 2015
3 answers
A
Depends. What is the RMS power rating on the speakers?
chad  Oct 06, 2015
A
I would think this amp would be perfect for those speakers. I have this amp driving a pair of Infinity tweeters by themselves right now with the expectation of adding larger speakers up front later. Plenty of power and the low noise works well with mid to high frequency speakers.
adam  Oct 05, 2015
A
I'm using the amp to power 2 6x9 for rear Channel. The RMS is close to the same, I believe the infinty can handle the power not sure what the watts are in the infinity
shaun  Oct 05, 2015

Loading articles...

Compare the sound