About the Jensen DUBS240
Big sound
Jensen incorporates the distinctive DUB look into the tweeter design, giving you a solid speaker that's stylish too.
Big sound
Jensen has partnered with DUB magazine to create special-edition speakers that deliver robust sound with an affordable price tag. Install these DUBS240 4" speakers, and you'll notice a significant improvement in the sound of your car's system. The DUBS240's rigid, injected-molded polypropylene woofer cone helps make this speaker so responsive, delivering midrange musical details the way they were meant to be heard. Jensen rounds out this 2-way speaker with a silk dome tweeter that keeps every high note smooth and clean.
The included DUB-designed grilles make a nice accessory for drivers looking to add a little flair to an average ride with a custom installation.
Highlights:
- 2-way car speakers (pair)
- 4" injection molded polypropylene woofer cone with NBR surround
- 3/4" silk dome tweeter
- power range: 2-45 watts RMS (180 watts peak power)
- frequency range: 65-35,000 Hz
- sensitivity: 87 dB
- top-mount depth: 1-15/16"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- MFR # DUBS240
What's in the box:
- Two 2-way speakers
- 2 Grilles
- Two 6" Lengths of speaker wire (each has female quick-slides on one end and bare wire on the other)
- Eight 1-1/8" Self-tapping Allen head screws
- 3mm Allen wrench
- 8 Speed clips
- 2 Strips of grille putty
- Instruction manual (English/ Spanish/ French)
- Template
Customer reviews for Jensen DUBS240
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Jensen DUBS240
Features & specs
General | ||
---|---|---|
Speaker Size | 4 | |
Design | 2-way | |
Tweeter Design | 20mm Dome (3/4") | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | IMPP | |
Woofer Surround | NBR | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87 | |
Sensitivity at 2.83 volts | 90 | |
Frequency Response | 65 - 35k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 45 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | 2 3/16 | |
Cutout Diameter or Length (inches) | 3 5/8 | |
Mounting Height (Inches) | 0.632 | |
Frame Width | 3.948 | |
Frame Length | 3.948 |
Product Research
Features
Woofers: The mica-reinforced Injection Molded Polypropylene (IMPP) woofer cones are rigid and lightweight. The Nitrile Butadiene Rubber (NBR) surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Dome Tweeter: Each speaker has a 20mm (3/4") silk dome tweeter with a neodymium magnet. Silk is lightweight and great for high frequency extension and efficiency. It is also designed for durability in the extreme automotive environment.
4/2 Hole Compatibility: Most 4" factory speakers use four mounting screws, however, in some vehicles, only two are used. The DUBs240's mounting tabs can be removed, allowing installation in 4-hole or 2-hole applications. Care should be taken handling the speaker after any tabs are removed because the broken edges may be sharp. Please check the Find What Fits Your Car application to confirm fit in your vehicle.
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...
Bought these speakers to replace the stock faring speakers on my '90 Tour Glide. They sound great, long overdue replacement.
Ernie_E from Florida