Overview: The MZ7TFT 7" Touch-Screen Multi-Zone Monitor allows you to
add a touch-screen monitor to your MZ-TFT compatible Jensen multimedia headunit
in the rear of your vehicle. The MZ7TFT touch-screen monitor is only compatible
with a Jensen receiver which features a MZ-TFT output connector.
Compatibility: The MZ7TFT 7" touch-screen monitor is compatible with
the following Jensen multimedia headunits featuring a MZ-TFT output connector -
VM9018, VM9022, VM9412, VM9512, and VM9512HD.
7" Touch-Screen Monitor: The MZ7TFT features a 7" color, TFT, LCD,
touch-screen monitor with a resolution of 234 x 1440 pixels. The MZ7TFT connects
to your compatible Jensen receiver, and controls the rear zone in your
multi-zone setup. The touch-screen monitor offers the following settings.
- Video Image: You can set the video image to Normal or Mirror.
- Display Mode: You can set the unit's display mode to either
Normal or Full.
- Picture Adjustment: You can adjust the monitor's brightness,
color, contrast or tint from -15 to 15.
- Auto Dimming: You can set the unit to automatically dim during
nighttime viewing from 0 to -30.
- Auto Backlight: The unit's LCD backlight will turn off after 10
seconds without signal input.
Headrest Mounting Bracket: The MZ7TFT 7" touch-screen monitor comes
supplied with a headrest mounting bracket which allows you to mount the
touch-screen monitor to your vehicle's headrest.
2 Channel IR Transmitter: The MZ7TFT features a built-in two-channel
IR transmitter for listening to optional wireless IR headphones.
Remote Compatible: The in addition the MZ7TFT's touch-screen controls,
the monitor will also operate from your compatible Jensen multimedia headunit's
IR wireless remote control.
Connections: The MZTFT touch-screen monitor features a 9" cable
terminated by a proprietary connector which plugs into the supplied 15'
audio/video/power connector cable. The connector cable features the following
- Power Wire: The red wire connects to the factory accessory or
ignition wire, which receives power when the vehicle's key is turned
- Ground Wire: The black wire connects to the factory ground wire
on your headunit or to a clean, unpainted metal part of your vehicle's
- Audio/Video RCAs: The composite video and stereo RCA inputs
connect the audio/video outputs of your compatible Jensen multimedia
headunit. This connection provide video to the monitor and audio to a set of
optional IR wireless headphones.
- TS Module: The TS Module RCA connector plugs into the MZ-TFT
connector on the back of your compatible Jensen receiver. This connection
allows the touch-screen monitor to operate your Jensen headunit.
A/V Input Jack: The MZTFT also features a front-panel 3.5mm
audio/video input for connecting an external audio/video source directly to the
Expansion Module: The MZ7TFT 7" touch-screen monitor comes with an
expansion module which allows you to connect three MZ7TFT monitors (two
additional) to your compatible Jensen multimedia headunit.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.