Chat
Contact us
Close contact box
Connect ID #
007 480 387 4
Connect ID #
007 480 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kenwood DPX308U CD receiver (New Stock)

Item # 113DPX308U

If you've got a double-DIN dash opening, take out that wimpy factory radio and slide in some Kenwood quality.

Find what Fits your vehicle

Remove

Checking fit...

If you've got a double-DIN dash opening, take out that wimpy factory radio and slide in some Kenwood quality.

Item # 113DPX308U

Shop all Kenwood Car Stereos

About the Kenwood DPX308U

Ken Nail
If you've got a double-DIN dash opening, take out that wimpy factory radio and slide in some Kenwood quality. The DPX308U CD receiver offers strong performance and useful features that'll make you wonder why you waited so long to replace your old radio.

If you've got a double-DIN dash opening, take out that wimpy factory radio and slide in some Kenwood quality. The DPX308U CD receiver offers strong performance and useful features that'll make you wonder why you waited so long to replace your old radio.

Ready to roll with your iPod®
Once you plug your player into the handy front-panel USB input, just press the "iPod" button to the left of the big control knob and you're ready to go. You'll feel right at home when you navigate your tracks and playlists, with the help of easy-to-use search tools like Alphabet Search. The dedicated "Search" and "Return" keys eliminate the need to work through menus when you're making a quick search.

You can also switch quickly to "passenger mode" to control your iPod® or iPhone® from the device — useful if you're listening to streaming content like Internet radio stations. Kenwood also includes a wireless remote so your passengers can control the entertainment while you worry about the driving.

Variable color options
Playing nice with your iPod is important, but you want a new receiver to look good, too. The DPX308U cuts a distinctive figure with its sleek styling, glossy exterior, and prominent control knob. To top it off, you can set the display and button colors to match your car's interior. You'll be looking forward to driving at night, when you can turn up the sound and the lights.

Sound quality to rock your ride
This Kenwood's built-in MOSFET amp will impress you with its clean power, so turn it up if you want. You can use the 3-band equalizer for precise adjustment of the highs, mids, and lows, while eight EQ presets allow quick shifts to a tone curve that matches your music. The Speaker Settings function tailors the output of the receiver to match the size and type of speakers you've got installed in your vehicle.

Want to keep your car's steering wheel audio controls?
In most vehicles, you can use an adapter to connect your vehicle's steering wheel controls to this Kenwood stereo. Connect a few wires, then program the adapter for your particular car and the Kenwood, and you'll retain the convenience of your steering wheel controls. Check the "Accessories" tab for compatible adapters.

iPod note: If you're going to use your iPod with this receiver, be sure to check "Details" for specific iPod model compatibility with this receiver or its optional iPod adapter.

READ LESS

Product highlights:

    General features:
    • CD receiver with AM/FM tuner
    • built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
    • plays CDs, CD-Rs, and CD-RWs, including discs loaded with MP3, WMA and AAC files
    • 13-digit variable-color display
    • wireless remote control
    Audio features:
    • 3-band parametric equalizer, plus 8 preset EQ curves
    • low-pass filter (sub preamp output)
    • 24-bit DAC
    Expandability:
    • iPod direct control via USB input — no adapter necessary, but adding Kenwood's optional cable lets you leave your iPod cable at home
    • inputs: front panel auxiliary and USB inputs
    • outputs: 4-channel preamp outputs (2-volt front, rear/sub)
    Other info:
    • compatible with most factory steering wheel audio controls (adapter required)
    • warranty: 1 year
    • MFR # DPX-308U

    What's in the box:

    • DD AM/FM CD receiver (with 10A fuse inserted in chassis)
    • Sleeve
    • Trim ring
    • Trim plate
    • Wiring harness
    • Wireless remote control (RC-405)
    • CR2025 3V lithium battery (installed in remote)
    • 2 Removal tools
    • 6 Pan-head ISO-mount screws
    • 6 Flat-head ISO-mount screws
    • 4 Strips of double-sided adhesive
    • Quick Start Guide (Eng/Fre/Spa)
    • Warranty Card

    Featured video:

    Customer reviews for Kenwood DPX308U

    Loading reviews...

    Average review:

    4.5 out of 5 stars
    67 reviews

    Thanks for submitting your review

    Filter by rating

    Customer photos

    Customer provided image, click to load a larger version.
    Customer provided image, click to load a larger version.

    Sort reviews

    Sort by:
    Items per page:
    View page:

    Verified customer (What's this?)
    Verified employee review (What's this?)

    Reviewed on Samsung.com

    This review was collected as part of a promotion

    Pros:

    Cons:

    Crutchfield response
    Customer provided image, click to load a larger version.
    << >>

    More details on the Kenwood DPX308U

    Stacey B.

    Features & specs

    Expandability
    AUX Input Front
    Audio/video Input ---
    USB Input Front
    USB Port Power ---
    Backup Camera Input No
    Second Camera Input No
    CarPlay No
    Android Auto No
    Siri Control No
    Alexa Voice Control
    Android Control USB MSC protocol
    Memory Card Slot USB memory
    Bluetooth Compatible No
    Satellite Radio Ready No
    HD Radio No
    Navigation ---
    iPod Compatibility
    Full size Classic/5Gen
    Nano Nano6/Nano5/Nano4/Nano3/Nano2/
    Touch Touch4/Touch3/Touch2/Touch1
    iPhone Phone4S/Phone4/Phone3GS/Phone3
    General
    RMS Power (CTA-2006) N/A
    RMS Power (Manufacturer) ---
    Peak Output 50 watts
    RMS Power Bandwidth 20-20kHz
    Preamp Outputs 4-channel
    Sub Preamp Outputs No
    Switchable Rear Preamp Outputs Yes
    Video Screen No
    Navigation App Compatible (iOS)
    Navigation App Compatible (Android)
    Preamp Voltage 2 volts
    Screen Size ---
    Screen Type ---
    Display Color Variable
    Key Button Color Variable
    EQ Bands 3
    Wireless Remote Yes
    Steering Wheel Control Compatible Adapter required
    Parts Warranty 1 Year
    Labor Warranty 1 Year
    Tuner
    FM Sensitivity 11.2 dBf
    European Tuning No
    Seek/Scan Seek
    Radio Data System No
    File Playback
    Music File Playback MP3, WMA, AAC
    High-res Playback
    The Kenwood DPX308U replaces these items:

    Product Research

    Display Features
    Audio Section
    Radio Functions
    Disc Playback
    USB/iPod/Aux Connectivity
    Remote Control
    Optional Software

    Display Features

    2-DIN Chassis: The DPX308 has a 2-DIN chassis (also known as "Double DIN"), and will fit in many vehicles with a large dash opening. The unit can be ISO-mounted using factory brackets, or Euro-mounted using the supplied mounting sleeve.

    Note: As always, please consult the Crutchfield Car Selector to verify fit with your vehicle.

    1-Line, 13-Digit FL Display: The Kenwood DPX308U is equipped with a 1-line, 13-digit fluorescent display.

    Variable Color Illumination: The Kenwood DPX308U features variable color display and button illumination. You can choose from one of 24 preset colors, have the unit scan through all 24 preset colors continuously, or customize your own color (RGB: 0-9). The display and button illumination can be set to the same color or set independently.

    Dimmer: The dimmer function will dim this unit's display and button illumination automatically when you connect the orange/white Illumination wire of this player and the vehicle light switch is turned On. You can also choose to dim the display manually.

    Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed." In addition, while the unit is in Standby mode, you can turn the clock display on or off. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed." Pressing and holding the source button turns the unit off completely.

    Demo Mode: This unit features a Demo mode which can be turned "on" or "off" within the menu.

    Audio Section

    24 Bit D/A Converter: The Kenwood DPX308U utilizes a 24-bit digital to analog converter for superior CD sound quality.

    MOSFET Amplifier: The Kenwood DPX308U is equipped with a MOSFET amplifier. Compared to conventional power supplies, the MOSFET amplification circuit is smaller and more efficient, and it delivers increased power with less distortion and absolutely zero on/off switching noise. More power means louder and cleaner music at higher volumes because you're not pushing the limits of the amplification circuit. The power output specs for the DPX308U are as follows:

    • Full Bandwidth Power: 22 watts RMS x 4 channels (at 4 ohms, 20-20kHz, 1% THD)
    • Maximum Output Power: 50 watts x 4 channels (200 total watts)

    Rotary Volume Control: The CD receiver uses a rotary volume control that increases and decreases the volume of the stereo from 0 to 35. The rotary knob also controls other audio settings such as Balance, Fader, Bass, Mid, Treble and preset EQ settings. In addition, the rotary knob allows you to scroll through and select your music tracks when the Music Search function is activated.

    Volume Offset: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0 (-8 to +8 for Aux source).

    Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of 'SP-Off' (flat/off), 'SP-OEM' (for OEM factory speaker systems), 'SP-6x9/6' (for systems with 6" and 6"x9" speakers), or 'SP-5/4' (for systems with 4" and 5" speakers).

    System Q Sound Control: Eight EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. Each preset has its own level settings for bass (100Hz), midrange (1kHz), and treble (10kHz). You can choose from the following preset EQ curves - Rock, Pops, Easy, Top 40, Jazz, Natural, Game, and User.

    Detail Audio Control: The Kenwood DPX308U features independent Bass, Treble and Midrange control when the System Q Sound Control is in User mode. The Detail Audio Control allows you to adjust the following settings for the Bass, Treble and Mid frequency levels.

    3-Band EQ Detailed Audio Settings
    Center Frequency Q-Factor Bass Extension Level
    Bass 40, 50, 60, 70, 80, 100, 120, or 150 Hz 1.00, 1.25, 1.50, or 2.00 On/Off -8 to +8
    Midrange 0.5k, 1.0k, 1.5k, or 2.0k Hz 1.00 or 2.00 N/A
    Treble 10.0k, 12.5k, 15.0k, or17.5k Hz N/A N/A

    Bass Boost: In addition, The Kenwood CD receiver features a Bass Boost control that can be set to the following levels - LV1, LV2 or Off.

    Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings for each source (CD, Tuner, USB/iPod, and Aux).

    Supreme Setting: When MP3/WMA/AAC files encoded at a low bit rate (less than 96 kbps, 44.1k, 48kHz) are played, the Supreme Setting function restores their high frequencies so the sound quality is closer to files encoded at a high bit rate. The processing is optimized for the compression format and the bit rate used. When the Supreme Setting is Off, the unit plays the original sound stored in the audio file.

    Selectable 2V Preamp Outputs: The DPX308U features Front and Rear/SW preamp outputs. The Rear/SW preamp output allows you to adjust from a full-range rear speaker preamp output to a low-pass, non-fading subwoofer preamp output.

    Subwoofer Controls: The Kenwood DPX308U offers the following subwoofer controls, when you have the unit's subwoofer preamp output activated.

    • Low Pass Filter: The receiver features a built-in Low Pass Filter control for the preamp-output, when the output is set to Subwoofer. You can select from 85 Hz, 120 Hz, 160 Hz, or off.
    • Subwoofer Phase: You can adjust the phase of the subwoofer output between 180-degrees (Reverse) or 0-degrees (Normal).
    • Subwoofer Level: Once the Subwoofer preamp output is activated, you can independently control the subwoofer preamp output level (-15 to +15) from the CD receiver.

    Tel Mute: The DPX308U features a cell-phone mute wire (brown) in its harness that when hooked up to your car's phone system mute wire will automatically mute the receiver's audio signal when a call comes in.

    Key Beep: The in-dash head unit provides an audible beep to confirm button operation. This function can be turned On or Off.

    Radio Functions

    AM/FM Tuner: The Kenwood DPX308U features a built-in AM/FM tuner. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.

    Tuner Presets: The DPX308U's tuner features 3 FM banks (1, 2, 3) and 1 AM bank for storing presets. The Kenwood DPX308U offers two preset modes.

    • Normal: You can store 6 presets for each AM/FM bank giving you a total of 18 FM presets and 6 AM presets (total of 24).
    • Mix: A total of 6 stations can be assigned to a total of 6 preset buttons, regardless of AM/FM band. You can recall a preset station without switching between bands.

    Auto Memory Tuning: Not only does the CD receiver's tuner allow you manually enter your desired presets you can choose to have the unit automatically put stations with good reception in the memory banks automatically; this is a handy feature when traveling.

    Direct Access Tuning: Using the included remote control, you can directly enter a station's frequency from the remote's numeric keypad.

    Forced Mono: This function reduces the noise when stereo broadcasts are received as monaural.

    Disc Playback

    Disc Compatibility: The unit features a single disc player that will playback CD-Audio, CD-Text, and finalized CD-R/CD-RW audio discs.

    MP3/WMA/AAC Playback: The DPX308U can play MP3 (8-320 kbps), WMA (32-192 kbps), and AAC (8-320 kbps) audio files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, Romeo, and Long file name formats. Each disc should have a maximum of 8 directory levels, 50 folders, and 255 files per folder with a maximum of 512 files and folders. During MP3/WMA/AAC  playback, the unit displays recorded ID3 Tag (ver. 1.x/2.x) information. The head unit will display up to 60 characters.

    Text Scroll: The DPX308U will display CD text or Audio file text. You can set the text scrolling feature to two different modes (Auto or Manual) to scroll longer titles across the screen.

    Music Search: The Kenwood AM/FM CD receiver features a Music Search feature which allows you to scroll through and select your MP3/WMA/AAC music folders and files, as well as scroll through your audio CD's music tracks using the head unit's rotary knob.

    Direct Music Search: The supplied IR wireless remote control (RC-405) allows you to search for music directly by entering the track number.

    Playback Modes: The Kenwood DPX308U features the following Repeat, Random, and Scan playback modes.

    • Repeat Play: Track, File, or Folder
    • Random Play: Disc or Folder
    • Scan Play: Track or File (plays the first 10-seconds of each music track on a disc or music file in a folder)

    Last Position Memory: If the unit is shut off or switched to the tuner mode while a CD is playing, the next time CD is selected as the source, playback will resume from the point where it left off.

    CD Read: This function sets the method for reading a CD disc. You can choose between two modes.

    • CD1: Automatically distinguishes between audio file disc and music CD when playing a CD or CD-R/RW disc.
    • CD2: When unable to play a special formatted CD, set this function to CD2 to force playing. Some music CD  discs may be unplayable even when set to this mode.

    Off Insert/Eject: A CD disc can be inserted or ejected with the power off. When a disc is inserted with the power off, the unit will automatically power up and begin playback.

    Auto Reload: The CD player will automatically reinsert the disc if it's ejected, but not removed for 20 seconds or more.

    USB/iPod/Aux Connectivity

    USB Port: The Kenwood DPX308U features a front-panel USB (1.1/2.0) type-A port that is hidden behind a sliding cover. The USB port enables connection and control of a portable USB mass-storage class device with MP3 (8-320 kbps), WMA (32-192 kbps), and AAC (8-320 kbps) music files. The USB port is compatible with all USB mass storage class devices that support the FAT16 or FAT32 file system. Your USB device should only have a maximum of 8 directory levels, 255 folders, and 255 files per folder with a maximum of 65,025 files and folders. During MP3/WMA/AAC playback, the unit displays recorded ID3 Tag (ver. 1.x/2.x)  information. The head unit will display up to 60 characters. The DPX308U will also charge your connected USB device's battery, when the head unit is powered up.

    Note: You cannot connect a USB device via a USB hub or Multi-Card Reader to this unit.

    iPod/iPhone Direct Connection: The DPX308U's front-panel USB port also acts as an iPod/iPhone high-speed direct connection when used with the optional Kenwood USB Direct Connection Cable (113KCIP102, sold separately) or the USB/iPod cable that comes with your iPod/iPhone. Using either cable allows audio playback, music navigation, information display, and charging of select iPod/iPhone models from the DPX308U.

    iPod/iPhone Audio Playback: The USB connection allows your iPod/iPhone's large music libraries to be loaded instantly to the head unit and sound quality to be maximized through the head unit's 24-bit D/A converter, allowing for a Signal to Noise ratio up to 110dB. The Kenwood head unit supports audio playback of music files and podcasts stored on your iPod or iPhone.

    iPod/iPhone Control: You can choose to control the iPod/iPhone from the head unit or from your iPod/iPhone's clickwheel or touchscreen.

    • Music Browsing: The Kenwood head unit allows you to navigate your iPod's music by Playlist, Artists, Album, Genre, Composer, Song, or Podcast. You can search these categories alphabetically or using a percentage search (0.5%, 1%, 5%, 10%).
    • Playlists: You can create your own custom iPod/iPhone playlist (up to 10 songs) from the head unit.
    • Related Search: You can browse for music of the same artist or genre as the one being currently played. You can select between the following Related Search modes.
      • Search Artist: displays albums of the same artist
      • Search Album: display music in the album in which the one being played is included
      • Search Genre: displays artists of the same genre
      • Search Composter: displays albums including music created by the same composer
    • Repeat & Random: The head unit supports Repeat (file) & Random (folder/all) playback functions of your connected iPod/iPhone.

    iPod/iPhone Display: The DPX308U will display your iPod/iPhone's music file information when you are controlling your iPod or iPhone from the Kenwood head unit. The head unit will display Track number, Elapsed playing time, Artist name, Song title, and Album label. If you choose to operate your connected iPod/iPhone via its clickwheel or touchscreen controls, the DPX308U will not display your iPod/iPhone's music information (the head unit will instead display iPod MODE).

    iPod/iPhone Charging: While connected and the ignition switch is set to ACC or ON, the head unit's USB connection will power and charge your iPod/iPhone.

    Note: If your iPod/iPhone has no initial battery charge, then the unit will not recognize it.

    iPod/iPhone Compatibility Chart: The Kenwood DPX308U is "Made for iPod/iPhone" compatible and supports the following iPod/iPhone model features (as of November 2011):

    iPod/iPhone Model Generation Tested Version Media Type Control Type Display Type Charge
    Audio Video Head Unit iPod/iPhone Song/Artist Text Track Info
    dock connector 3rd N/A N N N N N N N
    clickwheel
    color
    4th N/A N N N N N N N
    mini 1st N/A N N N N N N N
    2nd N/A N N N N N N N
    video 5th 1.3 Y N Y N Y Y Y
    classic 80GB 1.1.2 Y N Y Y Y Y Y
    120GB 2.0.1 Y N Y Y Y Y Y
    160GB 2.0.4 Y N Y Y Y Y Y
    nano 1st 1.3.1 Y N Y N Y Y Y
    2nd 1.1.3 Y N Y Y Y Y Y
    3rd 1.1.3 Y N Y Y Y Y Y
    4th 1.0.4 Y N Y Y Y Y Y
    5th 1.0.2 Y N Y Y Y Y Y
    6th 1.1 PC Y N Y Y Y Y Y
    touch 1st 2.2.1 Y N Y Y Y Y Y
    2nd 4.2.1 Y N Y Y Y Y Y
    3rd 5.0.1 Y N Y Y Y Y Y
    4th 5.0.1 Y N Y Y Y Y Y
    iPhone 2G 3.1.3 Y N Y Y Y Y Y
    3G 4.2.1 Y N Y Y Y Y Y
    3GS 4.3.5 Y N Y Y Y Y Y
    4 5.0.1 Y N Y Y Y Y Y
    4S 5.0.1 Y N Y Y Y Y Y

    Note: Apple iPod/iPhone software updates may change functionality results. If you download a newer software version, you may need to reset the head unit and your iPod/iPhone to regain functionality. If this doesn't work, you may need to wait until a newer software update is available.

    Aux In: The unit is equipped with a front panel 3.5mm minijack auxiliary input that can be used to input audio from a portable audio source, such as a portable MP3 player. The Aux input must be turned on to function. The DPX308U allows you to select the source type displayed when using the auxiliary input. You can choose from AUX, DVD, Portable, Game, Video, or TV.

    Remote Control

    Wireless Remote Control: The DPX308U comes with an IR remote control (RC-405) for wireless operation of the head unit. The remote will control Audio, CD, USB, and Tuner functions. It is powered by a single CR2025 3V lithium-cell battery (supplied).

    • Numeric Keypad: The wireless remote control features a numeric keypad (0-9) which allows direct track access of your music tracks & files (from CD or USB), as well as AM/FM presets.
    • Attenuator: The CD receiver features an Attenuator button on the supplied remote control that turns the volume down very quickly with one touch of the button.

    Steering Wheel Remote Compatibility: The head unit also features an OEM steering wheel remote control input wire (blue/yellow) within the included wiring harness that lets you keep your vehicle's factory radio steering wheel remote controls when used with the optional PAC SWI-RC Steering Wheel Control Interface Adapter (541SWIRC, sold separately);  or the optional Metra ASWC Steering Wheel Control Interface Adapter (120ASWC, sold separately).

    Note: Please consult Crutchfield's Outfit My Car to see if your vehicle is compatible.

    Loading accessories...

    Customer Q&A

    Loading articles...

    Compare the sound