Skip Navigation

Kenwood KCA-WR10

Wired remote bass boost

4 Reviews

Item #: 113KCAWR10

This item is no longer available.

Original Price: $24.99

Shop all Amplifier & Processor Remotes

Add to Cart

Kenwood KCA-WR10

Overview

Our take on the Kenwood KCA-WR10

Apply the proper bass tones to your music with Kenwood's optional bass boost remote controller, designed exclusively for the KAC-X1R, KAC-X10D, and KAC-X20 Excelon amplifiers. You can dial in up to 18 dB of boost for a formidable kick, then adjust the center point of the boost between 40 and 200 Hz to find the sweet spot in your vehicle.

Apply the proper bass tones to your music with Kenwood's optional bass boost remote controller, designed exclusively for the KAC-X1R, KAC-X10D, and KAC-X20 Excelon amplifiers. You can dial in up to 18 dB of boost for a formidable kick, then adjust the center point of the boost between 40 and 200 Hz to find the sweet spot in your vehicle.

The wired remote includes a 19.5-foot plug-in cable. Dimensions: 2-3/4"W x 1-1/4"H x 2-1/16"D. Warranty: 1 year.

Product work GREAT!!!!!

Anonymous, Westminster California

What's in the Box:

  • Wired bass boost remote controller
  • 19.5' Remote cable with RJ-11 connectors on each end
  • Mounting bracket
  • 2 Self-tapping screws
  • INstruction Manual (English
  • French
  • Spanish)
  • Warranty Card
Reviews

Kenwood KCA-WR10 Reviews

Average Customer Review:

4 Reviews

Kenwood KCA-WR10

Written by: Anonymous from Westminster California on June 11, 2012

Crutchfield Customer Review (What's this?)

Product work GREAT!!!!!

Pros:

Cons:

Kenwood KCA-WR10

Written by: James from Charleston, SC on September 25, 2010

Crutchfield Customer Review (What's this?)

Great product a must have for the kenwood mono block amp

Pros:

Cons:

No good

Written by: Sean from Southwest Wisconsin on March 24, 2010

Crutchfield Customer Review (What's this?)

This is a one band parametric EQ. This does not boost all frequencies evenly. It only boosts the freq that you have dialed in on the freq dial. This changes the response of your system. Any bass line that uses more that one note will have one freq stick out louder than the rest. Your better off using an inline potentiometer with a small line level amp to give you a boost.

Pros:

Cons:

Perfect!

Written by: Anonymous from Lathrop, MO on February 6, 2010

Crutchfield Customer Review (What's this?)

My old bass knob was shorting out. It was a little different but I replaced it with this model and it workes great. Even sounds better than my old bass knob when it was new. Definatley recomend it!

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Kenwood KCA-WR10 manual

  • Wired bass boost remote controller
  • 19.5' Remote cable with RJ-11 connectors on each end
  • Mounting bracket
  • 2 Self-tapping screws
  • INstruction Manual (English
  • French
  • Spanish)
  • Warranty Card

Product Research

Features

Overview: The Kenwood KCA-WR10 is an optional bass boost wired remote controller designed exclusively for the Kenwood's KAC-1XR, KAC-X10D, KAC-X20, X1200M eXcelon amplifiers. The wired remote controller comes with a 19.5' remote cable so you have enough cable length to run from your amplifier that is mounted in the rear of your vehicle to the KCA-WR10 that will be mounted in the front of your vehicle. The wired remote controller also comes supplied with its own mounting bracket that is held in place by two self-tapping screws.

Compatibility: The KCA-WR10 is compatible with the following Kenwood eXcelon amplifiers.

  • KAC-1XR
  • KAC-X10D
  • KAC-X20
  • X1200M

Bass Boost Adjustment: The Kenwood KCA-WR10 wired remote controller features a rotary bass boost level adjustment from 0 to +18dB and a rotary bass boost frequency adjustment from 40 to 100Hz.

LED: The KCA-WR10 features a power indicator LED recessed in the center of the wired remote control unit.

Connection: The wire remote controller is equipped with a RJ-11 input jack on the back of the unit to connect the 19.5' remote cable. The other end of the cable is plugged into the RJ-11 input jack of your compatible Kenwood eXcelon amplifier.

Mounting: The Kenwood KCA-WR10 comes supplied with a metal mounting bracket that is secured to a flat surface of your vehicle with two self-tapping screws and then slides into a clip on top of the controller.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Library