About the Kenwood eXcelon KFC-X468C
You can bank on the quality that you'll get from the Kenwood eXcelon line. The KFC-X468C has a PBO (an ultra-rigid crystal polymer) advanced fiber cone woofer for quick response and high resistance to moisture and heat.
A PEI (polyetherimide) film balanced dome tweeter is extremely light and responsive for smooth high-frequency response. Thanks to its weather-resistant butyl rubber surround, this top-notch 4"x6" will perform superbly for years to come.
Priced per pair
Product Highlights:
- PBO (polyphenylenebenzobisoxazole) advanced fiber woofer with butyl rubber surround
- 1" PEI (polyetherimide) film balanced dome tweeter
- sensitivity 90 dB
- frequency response 40-32,000 Hz
- recommended power range 2-25 watts RMS
- peak power handling 100 watts
- top-mount depth 1-13/16"
- 2-year warranty
- MFR # KFC-X468C
What's in the box:
Kenwood eXcelon KFC-X468C owner's manual
- Two 2-way speakers
- Two 9.5' lengths of speaker wire (each has female quick-slides on one end and bare wire on the other end)
- 2 Strips of self-adhesive foam
- 8 Self-tapping screws
- 8 Speed clips
- 8 Tinnerman clips
- Warranty Card
- Important Safeguards
Customer reviews for Kenwood eXcelon KFC-X468C
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood eXcelon KFC-X468C
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Balanced dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Polyetherimide | |
Woofer Composition | PBO advanced fiber | |
Woofer Surround | Butyl rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 40 - 32k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 25 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 1 13/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.346 | |
Frame Width | 4.019 | |
Frame Length | 6.227 |
Product Research
Woofers: The woofer cones are PBO advanced fiber. PBO is a high-performance fiber that has superior strength, thermal stability and very low moisture retention. Since PBO resists flexing and is heat-resistant, the speaker has lower distortion and improved power handling. The low moisture retention allows the speaker to retain its original performance for a longer period of time without being changed by the elements. For a smoother response and improved durability, each speaker uses a butyl rubber surround.
Tweeters: Each speaker uses a 1" PEI balanced-dome tweeter. PEI (Poly-Ether Imide) is a polymer film that has ideal sound characteristics, making it perfect for use as a tweeter. A PEI balanced-dome tweeter produces a wide soundstage for superior imaging.
Warranty Note: Although these speakers come with a 1 year warranty card, they are covered by the Kenwood eXcelon 2 year warranty.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I bought these speakers to replace the factory front door speakers in a 1996 Cavalier and they are a big improvement. Clean crisp highs and nice sounding lows. They sound great even with the sound turned up high.
BRIAN from BUENA PARK, CA