Skip Navigation

Kenwood Excelon KFC-X1730P

6-3/4" component speaker system — also fits many 6-1/2" openings

Item #: 113KX1730P

This item is no longer available.

Shop all Component Speakers

179.99

Overview

Our take on the Kenwood Excelon KFC-X1730P

Kenwood Excelon speakers incorporate technical know-how and advanced materials to give your music the full, rich sound it deserves. The KFC-X1730P component system features 6-3/4" woofers made from a carbon, glass fiber, and heat-resistant Nomex® hybrid material that offers extreme accuracy, especially at high volume levels. The butyl rubber surround resists weathering and provides reliable support that keeps your music playing, no matter what.

Kenwood Excelon speakers incorporate technical know-how and advanced materials to give your music the full, rich sound it deserves. The KFC-X1730P component system features 6-3/4" woofers made from a carbon, glass fiber, and heat-resistant Nomex® hybrid material that offers extreme accuracy, especially at high volume levels. The butyl rubber surround resists weathering and provides reliable support that keeps your music playing, no matter what.

Separate 1" silk dome tweeters deliver all the high-frequency details without sounding harsh. Because of their specially designed magnetic circuitry and neodymium magnets, these compact tweeters use less steel in their construction than most tweeters, so you hear more accurate response. The outboard crossovers utilize premium film capacitors that divide the sound between your tweeters and woofers without adverse coloration.

Note: Kenwood describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.

What's in the Box:

  • Two Woofers
  • 2 Woofer grilles
  • 2 Plastic grille rings
  • 2 Tweeters (each tweeter has a 5" Length of wire attached)
  • 2 Flush-mount tweeter housings (installed on tweeters)
  • 2 Flush-mount retaining clips
  • 2 OEM tweeter mounting brackets
  • 2 Multi-application woofer mounting rings
  • Twelve 1" Self-tapping screws
  • Four 5/8" Self-tapping screws
  • Eight 1/4" Screws
  • 2 Wing nuts
  • 8 Large speed clips
  • 4 Small speed clips
  • 8" Strip speaker grille putty
  • Installation instructions (English/ French/ Spanish)
  • Warranty information
  • Templates for woofers and tweeters are on the box

Product Highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-3/4" carbon/glass fiber/Nomex hybrid woofer
  • butyl rubber surround
  • 1" silk dome tweeter with multiple mounting options
  • external crossover with 3 tweeter levels (0, -2, -4 dB)
  • power range: 2-110 watts RMS (330 watts peak power)
  • frequency response 63-24,000 Hz
  • sensitivity: 86 dB
  • top-mount depth: 2-5/16"
  • includes adapter rings for 6-1/2" openings
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews
Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design 1" Dome
Tweeter Composition Silk
Woofer Composition Carbon-Glass Fiber-Nomex
Woofer Surround Butyl Rubber
Parts Warranty 2 Years
Labor Warranty 2 Years
Specifications
Sensitivity (1W at 1 meter) 86
Sensitivity at 2.83 volts N/A
Frequency Response 63 - 24k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 110
Peak Power Handling (Watts) 330
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 5/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5

Product Research

Woofers
Tweeters
Crossovers
Warranty

Woofers

Woofers: The 6-3/4" woofers use Carbon and Glass fiber Nomex hybrid cones and use rubber surrounds for added durability and bass response. The woofer basket is designed to fit a standard 4-hole 6-3/4" application. The included adapter rings expand the woofers' compatibility to include other 6-3/4" patterns used by GM and Chrysler, the standard 3-hole 6-1/2" pattern, and Ford's 4-hole 6-1/2" pattern. The woofers can also replace standard 6-1/2" speakers without using the adapter rings, but new screw holes will needed. Please check the Crutchfield Vehicle Selector to confirm compatibility with your vehicle.

Tweeters

Tweeters: The 1" soft dome tweeters offer smooth highs and low distortion.

Tweeter Mounting Options: The tweeters can be flush mounted using the supplied housings and metal retaining-clips. Once installed the tweeters can pivot in the housing, so their angle can be adjusted to obtain a better soundstage. The tweeters can also be top or bottom mounted in a factory tweeter location using the included brackets. The tweeters cannot pivot when installed in the OEM brackets. Once mounted in the appropriate housing, the tweeters have these dimensions:

  Flush Mount Factory Top Mount (remove bottom mount flanges) Factory Bottom Mount (remove top mount flanges)
Mounting Depth 1.231" mounting screw depth 1.027"
Mounting Height 0.670" 0.90" 0"
Cutout Diameter 1.763" 1.701" 1.701"
Frame Diameter 2.084" 2.630" 2.62"

Crossovers

Crossover Network: The 2-way crossovers have a 6 kHz high-pass filter for the tweeters and a 6 kHz low-pass filter for the woofers. The crossover has an automatically resetting tweeter protection circuit that reduces the tweeter volume when overloaded.

Connections: The passive crossovers' feature screw terminal inputs and outputs; they will accommodate bare wire or spade connectors up to 0.315" wide. Kenwood recommends using 12 gauge speaker wire (sold separately).

Tweeter Level: A jumper pin inside the crossover allows you to adjust the output level of the tweeter; choose 0 dB, -2 dB, or -4 dB.

Mounting: Each crossover can be mounted using two of the included screws through two holes in the casing. To connect and mount the crossovers, the plastic cover must be removed and then re-installed once connections and mounting is completed.

Dimensions:

  • Length: 4.57"
  • Width: 2.60"
  • Height: 1.34"

Warranty

Warranty Note: Although the information included with these speakers indicates a 1-year warranty, they are actually covered by the Kenwood eXcelon 2-year warranty.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library