Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Woofers: The 6-3/4" woofers use Carbon and Glass fiber
Nomex hybrid cones and use rubber surrounds for added durability and bass response.
The woofer basket is designed to fit a standard 4-hole 6-3/4" application. The
included adapter rings expand the woofers' compatibility to include other 6-3/4"
patterns used by GM and Chrysler, the standard 3-hole 6-1/2" pattern, and Ford's
4-hole 6-1/2" pattern. The woofers can also replace standard 6-1/2" speakers
without using the adapter rings, but new screw holes will needed. Please check the
Crutchfield Vehicle Selector to confirm compatibility with your vehicle.
Tweeters: The 1" soft dome tweeters offer smooth highs
and low distortion.
Tweeter Mounting Options: The tweeters can be flush mounted using
the supplied housings and metal retaining-clips. Once installed the tweeters can pivot
in the housing, so their angle can be adjusted to obtain a better soundstage. The
tweeters can also be top or bottom mounted in a factory tweeter location using the
included brackets. The tweeters cannot pivot when installed in the OEM brackets.
Once mounted in the appropriate housing, the tweeters have these dimensions:
||Factory Top Mount (remove bottom mount
||Factory Bottom Mount (remove top
||mounting screw depth
Crossover Network: The 2-way crossovers have a 6 kHz high-pass
filter for the tweeters and a 6 kHz low-pass filter for the woofers. The crossover
has an automatically resetting tweeter protection circuit that reduces the tweeter
volume when overloaded.
Connections: The passive crossovers' feature screw terminal inputs
and outputs; they will accommodate bare wire or spade connectors up to 0.315" wide.
Kenwood recommends using 12 gauge speaker wire (sold separately).
Tweeter Level: A jumper pin inside the crossover allows you to
adjust the output level of the tweeter; choose 0 dB, -2 dB, or -4 dB.
Mounting: Each crossover can be mounted using two of the included
screws through two holes in the casing. To connect and mount the crossovers, the
plastic cover must be removed and then re-installed once connections and mounting
- Length: 4.57"
- Width: 2.60"
- Height: 1.34"
Warranty Note: Although the information included with these
speakers indicates a 1-year warranty, they are actually covered by the Kenwood
eXcelon 2-year warranty.