This Kenwood "party pack" includes the KAC-1502S 2-channel amplifier and two KFC-W110S 10" subs — exactly the components you need to produce bold, punchy bass in your car. Just add an enclosure and wiring, and you'll enjoy strong low-frequency performance.

Loud and clear
Each KFC-W110S 10" subwoofer sports an injection-molded polypropylene cone with a thick urethane surround, a combination that promotes deep excursion and accurate bass response. Each sub handles up to 175 watts RMS, and can be mounted in a sealed or ported box.

Rugged power
Kenwood's tough KAC-1502S 2-channel amplifier powers the two subs comfortably with 150 watts in single-channel mode. A low-pass filter directs the correct frequencies to the subs, giving you plenty of bass without distortion. You'll finally hear and feel the low-frequency notes your car's full-range speakers can't play.

Important Note: The power of the amp in this bass package is significantly less than the manufacturer's recommended power handling for the included sub(s). It's OK to underpower your subs, as long as you set the amp's gain controls properly to avoid distortion. This diagram shows you how to wire up the sub(s) in this package.

Product Highlights:

  • package includes Kenwood KAC-1502S 2-channel amplifier and two KFC-W110S 10" subwoofers
KAC-1502S 2-channel amplifier
  • 60 watts RMS x 2 at 4 ohms (150 watts x 1 bridged at 4 ohms)
  • CEA-2006 compliant
  • fixed low-pass filter (80 Hz at 18 dB per octave)
  • preamp and speaker-level inputs
  • requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
  • 9-1/8"W x 2-3/16"H x 7-1/8"D
  • warranty: 1 year
KFC-W110S 10" 8-ohm subwoofers
  • injection-molded polypropylene woofer cone with high-roll urethane surround
  • black stamped-steel basket
  • power range (per sub): 45-175 watts RMS (700 watts peak power)
  • frequency response: 35-1,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 4-7/8"
  • sealed box volume (per sub): 1 cubic foot
  • ported box volume (per sub): 1-1/4 cubic feet
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • This Kenwood Amp/Sub Package contains three individually packaged items in one larger box: a KAC-1502S Amplifier and two KFC-W110S Subwoofers
  • The KAC-1502S Box includes:
  • 2-Channel amplifier
  • 25 amp ATO fuse (installed)
  • 7.5" Speaker-level input harness
  • Four 5/8" Self-tapping screws
  • Instruction manual (English/ French/ Spanish)
  • Warranty information
  • Each KFC-W110S Subwoofer box includes:
  • 10" SVC 8-ohm woofer
  • Eight 1" Self-tapping screws
  • Self-adhesive foam gasket
  • Instruction manual
  • Warranty information

Product Research

Amplifier
Subwoofers

Amplifier

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4-ohm load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range (for full range amplifiers) of 20 Hz to 20,000 Hz. Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). The Kenwood KAC-1502S under CEA-2006 regulations is rated at 60 Watts RMS x 2 channels with an 80 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 95 dB.

2-Ohm Stable: The amplifier can support a 2-ohm load in stereo; the 2-ohm power output is 75 watts RMS x 2 channels.

Bridgeable: This two-channel amplifier can be bridged to a 4-ohm mono load; the bridged output is 150 watts x 1 channel RMS.

Cast Aluminum Heat Sink: The KAC-1502S utilizes a cast aluminum heat sink design to ensure the amplifier stays cool.

Protection circuitry: The amplifier features protection circuits that will turn the amp off in case of the following events:

  • speaker output contacts ground
  • speaker wire short-circuits
  • unit malfunctions and DC is sent to speaker output

Power Indicator: When the amplifier is turned on the Power indicator (on top of the amp) lights up red. This indicator turns off with the amplifier, and will turn off if the amplifier goes into protect mode.

Gain Control: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-1502S features an adjustable gain control; 0.2-5.0 volts (RCA).

Low Pass Crossover: The amplifier has a fixed 80Hz, -18dB/oct low-pass filter which can be turned On or Off.

Power Connections: The power, ground, and remote turn-on connections are 0.35" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. Minimum 10 gauge wire is required for power and ground.

Speaker Outputs: The two pair of speaker outputs are 0.35" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Note: The speaker output terminals can be used in stereo or bridged mode.

Line Level Input: The line input is a pair of stereo RCA jacks.

Speaker Level Input: A harness is included for the speaker level input. The input harness is common ground; it will not accept floating ground outputs.

Fuse: The amplifier uses a 25-amp ATO blade-type fuse.

Subwoofers

Woofer: The cone is constructed of polypropylene which is lightweight, efficient, and durable.

Surround Material: The woofer utilizes a high excursion urethane foam for added durability and better bass performance.

Basket: The woofer features a black stamped-steel basket for added rigidity.

Enclosure Compatibility: The KFC-W110S can be mounted in either a sealed or ported enclosure:

  • Sealed Box Volume: The recommended sealed box sizes range from 0.6 cu/ft to 1.5 cu/ft, the ideal size being 1.0 cu/ft.
  • Ported Box Volume: The recommended ported box sizes range from 0.75 cu/ft to 1.75 cu/ft, the ideal size being 1.25 cu/ft using a 3" diameter x 7" long port.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kenwood 150-watt Bass Package Reviews

Average Customer Review:

6 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great bang for the buck

Written By Dantrin, Falconer, NY on Sunday, April 13, 2014

Crutchfield Customer Review (What's this?)

Was looking for a little upgrade on the cheap for my 2005 mustang and it was well worth the money.

Pros: Good bass from a couple of 10 inch subs and amp.

Cons: Didn't work so well on mine with speaker level input, had to switch over to RCA jacks then it worked great.

Kenwood 150-watt Bass Package

Written By Anonymous, Greensboro nc on Friday, February 21, 2014

Crutchfield Customer Review (What's this?)

Great value for the money and sounds great

Pros: Cheap nice stuff

Cons: None

Reviews for the Kenwood 150-watt Bass Package

Written By William R, Rowlett, Texas on Thursday, June 06, 2013

Crutchfield Customer Review (What's this?)

My !8 year old grand son and I , both being rookies, installed this with a new receiver. The receiver installed without any complications. We new we would have many question about installing the two subs and amp. We were not disappointed by the several Crutchfield techs that were readily available to assist with answer to questions. The Crutchfield staff (techs, advisers, sales,switchboard ) made this a very good experience. One tech, Vince, determined that one sub was defective and immediately sent a replacement. All companies should be so very conscientious. Crutchfield provides amazing Customer service.

Pros: Great value and performance.

Cons: None

Audio

Written By Jim, Adak, AK on Thursday, May 23, 2013

Crutchfield Customer Review (What's this?)

Excellent qulity made very well sounds great.

Kenwood 150-watt Bass Package

Written By Springer, El Paso, TX on Thursday, May 02, 2013

Crutchfield Customer Review (What's this?)

Awesome punch! Fits great in my 2010 Dodge Ram 2500 crew cab. Installed sub box under rear seats

Pros: Packs plenty of power for the money. You won't be disappointed.

Cons: None

More than expected!

Written By TaylorB, Bismarck, ND on Tuesday, April 23, 2013

put it in my 2009 chevy 1500 crew cab and i wasnt expecting much right away but i played with some settings and i couldnt be happier! i listen to metal and hard rock and it kept up so well with the fast double bass and everything. it is what i wanted in a system!

Pros: sounds amazing at an incredible price!

Get everything you’ll need to enjoy your new Kenwood 150-watt Bass Package

Kits make it easier and less expensive to install your new amplifier. Wiring not included with the amp.
It's critical to have good wire, and none is included with the subs.
Dynamat helps reduce ambient road noise and your vehicle's "rattles," making it easier for you to hear your music better. Easy to install.
Protect your charging system and improve your bass with a capacitor. Ground cable and connectors required (not included).
Don't forget those little extras that enhance your sub box.
These tools will make the installation easier.
Get more info about having your new amplifier put in by a qualified professional in your area.
Patch cables take the music from your stereo to the amplifier. Some kits don't include them, and you can always get better quality cables like these separately.
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed dual 10" subwoofer enclosure (Model BB102-75S)

Item #: 777BB1027S

(18)

$79.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed single 10" subwoofer enclosure (Model BB10-75S)

Item #: 777BB1075S

(14)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported dual 10" subwoofer enclosure (Model BB102-125V)

Item #: 777BB1021V

(31)

$79.99
Add to Cart
Sound Ordnance BB10-1V

Sound Ordnance BB10-1V

Ported single 10" subwoofer enclosure

Item #: 777BB101V

(2)

$69.99
Add to Cart
Sound Ordnance BB10-64S

Sound Ordnance BB10-64S

Sealed single 10" subwoofer enclosure

Item #: 777BB1064S

(11)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported single 10" subwoofer enclosure (Model BB10-125V)

Item #: 777BB1012V

(9)

$79.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported single 10" subwoofer enclosure (Model BB10-75V)

Item #: 777BB1075V

(24)

$59.99
Add to Cart
Rockford Fosgate RFK10i

Rockford Fosgate RFK10i

10-gauge amplifier power and signal wiring kit

Item #: 575RFK101

(41)

$49.99
Add to Cart
Rockford Fosgate RFK10

Rockford Fosgate RFK10

10-gauge amplifier power wiring kit

Item #: 575RFK10

(40)

$29.99
Add to Cart
EFX PA10BX Wiring Kit

EFX PA10BX Wiring Kit

10-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA10BX

(8)

$29.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(31)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(53)

Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
Dynamat 19100

Dynamat 19100

License Frame Kit

Item #: 15419100

(15)

$14.99
Add to Cart
Dynamat Xtreme Wedge Pack

Dynamat Xtreme Wedge Pack

1 sheet, 4 square feet

Item #: 15410425

(7)

$39.99
Add to Cart
Dynamat Xtreme Trunk Kit

Dynamat Xtreme Trunk Kit

5 sheets, 20 square feet

Item #: 15419405

(14)

$169.99
Add to Cart
Dynamat Dynaliner

Dynamat Dynaliner

One 54" x 32" sheet (1/8" thick)

Item #: 15411101

(6)

$69.99
Add to Cart
T-Spec Capacitor

T-Spec Capacitor

1.5-farad capacitor with red LCD meter

Item #: 12015DDC

(11)

$79.99
Add to Cart
Polyester Fiber Stuffing

Polyester Fiber Stuffing

Make your subwoofer think it's in a bigger box (1-pound pack)

Item #: 027808

(36)

$12.99
Add to Cart
Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCRB

(14)

Metra Box Carpet

Metra Box Carpet

Carpet roll (54" x 5 yards) — available in 3 colors (Black)

Item #: 120TL3015

(24)

$39.99
Add to Cart
Corner Protectors

Corner Protectors

Item #: 1251536

(5)

Port Tube

Port Tube

3" diameter, 4-1/2" long

Item #: 125M1702

(2)

Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCRS

(6)

Rubber Feet

Rubber Feet

Item #: 125F1692

(4)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCSB

(7)

Springback Handle

Springback Handle

Item #: 125H1051K

(2)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCSS

(7)

Grille Clamps

Grille Clamps

(Front/top mount clamps)

Item #: 125G727KIT

(15)

Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(54)

$24.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(34)

$12.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(17)

$19.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(71)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(4)

$29.99
Add to Cart
Install Bay 3320

Install Bay 3320

Auto-ranging digital multimeter

Item #: 1203320

$39.99
Add to Cart
Install Bay IB35400

Install Bay IB35400

Premium door panel and trim tool

Item #: 12035400

$15.99
Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(8)

$24.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart
T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (20-foot)

Item #: 120RCA202

(28)

$20.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Reference Series Multi-Core RCA patch cables — available in 5 different lengths (25-foot)

Item #: 142RR25

$31.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Elite Series Braided Multi-Core RCA patch cables — available in 5 different lengths (3-foot)

Item #: 142RE3

$39.95
Add to Cart
EFX 2-Channel RCA Patch Cables

EFX 2-Channel RCA Patch Cables

Core Series Twisted RCA patch cables — available in 5 different lengths (25-foot)

Item #: 142RCT25B

$17.95
Add to Cart

Questions & Answers Ask the community. Share your knowledge.

1 question already asked

If you use the speaker foam that you stuff inside of the Sub-Woofer enclosure, then you'll get better deeper bass response. It will fake out the woofer and it will work and sound great. R. [ RICKY  Feb 06, 2014 ]
Yes, you can, it will raise the system "Q" but you shouldn't notice the difference, unless you're measuring with audiophile instruments like an RTA. [ CARLFRED A  Feb 03, 2014 ]