This Kenwood "party pack" includes the KAC-1502S 2-channel amplifier and two KFC-W112S 12" subs — exactly the components you need to produce bold, punchy bass in your car. Just add an enclosure and wiring, and you'll enjoy strong low-frequency performance.

Loud and clear
Each KFC-W112S 12" subwoofer sports an injection-molded polypropylene cone with a thick urethane surround, a combination that promotes deep excursion and accurate bass response. Each sub handles up to 200 watts RMS, and can be mounted in a sealed or ported box.

Rugged power
Kenwood's tough KAC-1502S 2-channel amplifier powers the two subs comfortably with 150 watts in single-channel mode. A low-pass filter directs the correct frequencies to the subs, giving you plenty of bass without distortion. You'll finally hear and feel the low-frequency notes your car's full-range speakers can't play.

Important Note: The power of the amp in this bass package is significantly less than the manufacturer's recommended power handling for the included sub(s). It's OK to underpower your subs, as long as you set the amp's gain controls properly to avoid distortion. This diagram shows you how to wire up the sub(s) in this package.

Product Highlights:

  • package includes Kenwood KAC-1502S 2-channel amplifier and two KFC-W112S 12" subwoofers
KAC-1502S 2-channel amplifier
  • 60 watts RMS x 2 at 4 ohms (150 watts x 1 bridged at 4 ohms)
  • CEA-2006 compliant
  • fixed low-pass filter (80 Hz at 18 dB per octave)
  • preamp and speaker-level inputs
  • requires 10-gauge power and ground leads — wiring and hardware not included with amplifier
  • 9-1/8"W x 2-3/16"H x 7-1/8"D
  • warranty: 1 year
KFC-W112S 12" 8-ohm subwoofers
  • injection-molded polypropylene woofer cone with high-roll urethane surround
  • black stamped-steel basket
  • power range (per sub): 50-200 watts RMS (800 watts peak power)
  • frequency response: 28-800 Hz
  • sensitivity: 90 dB
  • top-mount depth: 5-9/16"
  • sealed box volume (per sub): 1-1/4 cubic foot
  • ported box volume (per sub): 1-1/2 cubic feet
  • warranty: 1 year
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • This Kenwood Amp/Sub Package contains three individually packaged items in one larger box: a KAC-1502S Amplifier and two KFC-W112S Subwoofers
  • The KAC-1502S Box includes:
  • 2-Channel amplifier
  • 25 amp ATO fuse (installed)
  • 7.5" Speaker-level input harness
  • Four 5/8" Self-tapping screws
  • Instruction manual (English/ French/ Spanish)
  • Warranty information
  • Each KFC-W112S Subwoofer box includes:
  • 12" SVC 8-ohm woofer
  • Eight 1" Self-tapping screws
  • Self-adhesive foam gasket
  • Instruction manual
  • Warranty information

Product Research

Amplifier
Subwoofers

Amplifier

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4-ohm load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range (for full range amplifiers) of 20 Hz to 20,000 Hz. Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). The Kenwood KAC-1502S under CEA-2006 regulations is rated at 60 Watts RMS x 2 channels with an 80 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 95 dB.

2-Ohm Stable: The amplifier can support a 2-ohm load in stereo; the 2-ohm power output is 75 watts RMS x 2 channels.

Bridgeable: This two-channel amplifier can be bridged to a 4-ohm mono load; the bridged output is 150 watts x 1 channel RMS.

Cast Aluminum Heat Sink: The KAC-1502S utilizes a cast aluminum heat sink design to ensure the amplifier stays cool.

Protection circuitry: The amplifier features protection circuits that will turn the amp off in case of the following events:

  • speaker output contacts ground
  • speaker wire short-circuits
  • unit malfunctions and DC is sent to speaker output

Power Indicator: When the amplifier is turned on the Power indicator (on top of the amp) lights up red. This indicator turns off with the amplifier, and will turn off if the amplifier goes into protect mode.

Gain Control: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-1502S features an adjustable gain control; 0.2-5.0 volts (RCA).

Low Pass Crossover: The amplifier has a fixed 80Hz, -18dB/oct low-pass filter which can be turned On or Off.

Power Connections: The power, ground, and remote turn-on connections are 0.35" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. Minimum 10 gauge wire is required for power and ground.

Speaker Outputs: The two pair of speaker outputs are 0.35" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Note: The speaker output terminals can be used in stereo or bridged mode.

Line Level Input: The line input is a pair of stereo RCA jacks.

Speaker Level Input: A harness is included for the speaker level input. The input harness is common ground; it will not accept floating ground outputs.

Fuse: The amplifier uses a 25-amp ATO blade-type fuse.

Subwoofers

Woofer: The cone is constructed of polypropylene which is lightweight, efficient, and durable.

Surround Material: The woofer utilizes a high excursion urethane foam for added durability and better bass performance.

Basket: The woofer features a black stamped-steel basket for added rigidity.

Enclosure Compatibility: The KFC-W112S can be mounted in either a sealed or ported enclosure:

  • Sealed Box Volume: The recommended sealed box sizes range from 0.8 cu/ft to 1.75 cu/ft, the ideal size being 1.25 cu/ft.
  • Ported Box Volume: The recommended ported box sizes range from 1.0 cu/ft to 2.0 cu/ft, the ideal size being 1.5 cu/ft using a 3" diameter x 7" long port.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Kenwood 150-watt Bass Package Reviews

Average Customer Review:

11 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $500 rewards card

(0)
(0)
(0)
(0)
(0)

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

adding bass

Written By BKL, B'ham, WA on Tuesday, April 08, 2014

Crutchfield Customer Review (What's this?)

while installing a new stereo I decided to add some bass & wow does this gear perform

Pros: not to hard to install and the sound is extra crisp & clean from the lowest sound levels right up to my pain threshold

Cons: 12" drivers can be difficult to mount in an ordinary car, but my Eurovan has plenty of spaces

Awesome

Written By frojay, kc mo on Sunday, April 06, 2014

Crutchfield Customer Review (What's this?)

This party pack had everything needed to get the great tunes antone would want.

Pros: It is easy to install.

Cons: It doesnt come with a speaker box

Kenwood 150-watt Bass Package

Written By Anonymous, Ukiah,ca on Tuesday, February 25, 2014

Crutchfield Customer Review (What's this?)

I liked my product. Got here quik. Installed a few days later. sounds great!!

Pros: Great product

Cons: Zero

Awesome deal

Written By Amber, Lagrange,ga on Monday, July 29, 2013

Crutchfield Customer Review (What's this?)

Awesome deal and great sound! Love it!

Nice Couple

Written By J.J., P.R. Bayamon on Thursday, May 09, 2013

Crutchfield Customer Review (What's this?)

Nice couple

This is what a call a nice couple full of bass, very sweet bass, not too much, not to little, but very clear and natural, good fidelity. But when you hit the gain, this couple takes out the madness and shakes the house. You will be surprise. Ask my Bronco II 88 they start to tare down the rust on her.

Best bang for your buck

Written By Dan, Gerry, Ny on Saturday, April 27, 2013

Crutchfield Customer Review (What's this?)

Bought this to put in my buddies 3500 quad cab. Built are own boxes to spec and these sound great. You cant get a better bang for your buck for what these cost. Thinking will be buying a set for my mustang next.

Pros: Super deal

Awesome package

Written By RonnyR, myrtle beach, SC on Tuesday, March 19, 2013

Crutchfield Customer Review (What's this?)

package is perfect subs hit very hard when bridged, amp is powerful enough to push these subs very hard. this is a great package and the price is great would definetly recommend to anyone and would definitly buy again!!

Pros: hit very hard

U get what u paid for....

Written By Albie808, Hawaii on Tuesday, June 19, 2012

Crutchfield Customer Review (What's this?)

Amp is under powered to push the subs so had to buy an other amp to push them. I install these subs in my benz nd when i try to listen to the bass it sounds like it was bugging out on low setting. It Does not hit hard, even a cheaper sub like jensens will hit harder then these things

Pros: Cheap to buy

Cons: Everything in the package is bad, keep away from this subs

Kenwood 150-watt Bass Package

Written By Zack M, Evansville, IN on Thursday, May 03, 2012

Crutchfield Customer Review (What's this?)

I put these in the trunk of my 2000 VW Beetle in a Sound Ordnance BB122-175V box. It was a pretty easy installation, and they sound great. I have a JVC ARSENAL KD-AHD79 deck. They definitely meet my expectations, and they were what I was looking for.

Pros: Good sound, nice thump

Cons: none

Kenwood Dual Sub Package

Written By Glenn, Westlake, OH on Monday, April 23, 2012

Crutchfield Customer Review (What's this?)

Wow for under $200 you can't beat the sound. These have great thump for the value. I put them in a Sound Ordnance box in the trunk of my family car. Just enough bass to beef up the richness of the music.

Pros: Great Value. Easy to mount. Put amp under passenger seat and fits well.

Cons: It would be nice to have grills be a part of the package. I would have paid more for them. Crutchfield does not carry Kenwood Grills so I have to find them elsewhere.

Kenwood 150-watt Bass Package

Written By RcDavid, Indiana on Tuesday, January 31, 2012

Crutchfield Customer Review (What's this?)

Good sounding starter Bass package at a great price. Very fast shipping and package included everything detailed on the website. Installing the subs within a good Box is key.

Pros: Good quality for the price

Get everything you’ll need to enjoy your new Kenwood 150-watt Bass Package

Kits make it easier and less expensive to install your new amplifier. Wiring not included with the amp.
You'll need high-quality speaker wire to connect your sub to your amp.
Dynamat helps reduce ambient road noise and your vehicle's "rattles," making it easier for you to hear your music better. Easy to install.
Protect your charging system and improve your bass with a capacitor. Ground cable and connectors required (not included).
Don't forget those little extras that enhance your sub box.
These tools will make the installation easier.
Get more info about having your new amplifier put in by a qualified professional in your area.
Patch cables take the music from your stereo to the amplifier. Some kits don't include them, and you can always get better quality cables like these separately.
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed dual 12" subwoofer enclosure (Model BB122-125S)

Item #: 777BB1222S

(22)

$79.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed single 12" subwoofer enclosure (Model BB12-125S)

Item #: 777BB1212S

(26)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported dual 12" subwoofer enclosure (Model BB122-175V)

Item #: 777BB1221V

(49)

$79.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported single 12" subwoofer enclosure (Model BB12-150V)

Item #: 777BB12150

(30)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Sealed single 12" subwoofer enclosure (Model BB12-95S)

Item #: 777BB1295S

(21)

$59.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported dual 12" subwoofer enclosure (Model BB122-125V)

Item #: 777BB1222V

(17)

$79.99
Add to Cart
Sound Ordnance™ Bass Bunker

Sound Ordnance™ Bass Bunker

Ported single 12" subwoofer enclosure (Model BB12-200V)

Item #: 777BB1220V

(45)

$69.99
Add to Cart
Rockford Fosgate RFK10i

Rockford Fosgate RFK10i

10-gauge amplifier power and signal wiring kit

Item #: 575RFK101

(40)

$49.99
Add to Cart
Rockford Fosgate RFK10

Rockford Fosgate RFK10

10-gauge amplifier power wiring kit

Item #: 575RFK10

(40)

$29.99
Add to Cart
EFX PA10BX Wiring Kit

EFX PA10BX Wiring Kit

10-gauge amplifier wiring kit — includes 2-channel patch cable

Item #: 142PA10BX

(1)

$29.99
Add to Cart
T-Spec 16-gauge Speaker Wire

T-Spec 16-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW16WB1

(13)

T-Spec 12-gauge Speaker Wire

T-Spec 12-gauge Speaker Wire

Black/white jacket — priced per foot

Item #: 120SW12WB1

(30)

Stinger PRO Series Speaker Wire

Stinger PRO Series Speaker Wire

Priced per foot (16 Gauge)

Item #: 541SPW516B

(51)

Dynamat Xtreme Wedge Pack

Dynamat Xtreme Wedge Pack

1 sheet, 4 square feet

Item #: 15410425

(7)

$39.99
Add to Cart
Dynamat Xtreme Trunk Kit

Dynamat Xtreme Trunk Kit

5 sheets, 20 square feet

Item #: 15419405

(13)

$169.99
Add to Cart
Dynamat 19100

Dynamat 19100

License Frame Kit

Item #: 15419100

(15)

$14.99
Add to Cart
Dynamat SuperLite Tri-Pak

Dynamat SuperLite Tri-Pak

Triple package — 3 sheets, 12 square feet (Model #10612)

Item #: 15410612

(17)

$69.99
Add to Cart
Dynamat Dynaliner

Dynamat Dynaliner

One 54" x 32" sheet (1/8" thick)

Item #: 15411101

(6)

$69.99
Add to Cart
T-Spec Capacitor

T-Spec Capacitor

1.5-farad capacitor with red LCD meter

Item #: 12015DDC

(11)

$79.99
Add to Cart
Polyester Fiber Stuffing

Polyester Fiber Stuffing

Make your subwoofer think it's in a bigger box (1-pound pack)

Item #: 027808

(35)

$12.99
Add to Cart
Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCRB

(13)

Metra Box Carpet

Metra Box Carpet

Carpet roll (54" x 5 yards) — available in 3 colors (Black)

Item #: 120TL3015

(24)

$39.99
Add to Cart
Corner Protectors

Corner Protectors

Item #: 1251536

(5)

Port Tube

Port Tube

3" diameter, 4-1/2" long

Item #: 125M1702

(2)

Metra Speaker Terminal

Metra Speaker Terminal

Round terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCRS

(6)

Rubber Feet

Rubber Feet

Item #: 125F1692

(4)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with binding post connectors (for do-it-yourself box builders)

Item #: 120TCSB

(7)

Springback Handle

Springback Handle

Item #: 125H1051K

(2)

Metra Speaker Terminal

Metra Speaker Terminal

Square terminal cup with spring clip connectors (for do-it-yourself box builders)

Item #: 120TCSS

(7)

Grille Clamps

Grille Clamps

(Front/top mount clamps)

Item #: 125G727KIT

(15)

Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6NGL

(52)

$24.99
Add to Cart
Metra Crimp Tool and Connectors

Metra Crimp Tool and Connectors

Package contains crimp tool and over 150 pieces

Item #: 120CRIMPKT

(15)

$19.99
Add to Cart
Pro.Fit Wire Worm

Pro.Fit Wire Worm

Installation tool helps route wiring through tight spaces

Item #: 042DM4533

(33)

$12.99
Add to Cart
S&G Wire Cutter/Stripper Tool

S&G Wire Cutter/Stripper Tool

Cuts and strips 12- to 22-gauge wire

Item #: 18119100

(15)

$19.99
Add to Cart
S&G Tool Aid 87650

S&G Tool Aid 87650

Door Trim and Panel Removal Tool

Item #: 18187650

(69)

Skewdriver Pro SPK4042

Skewdriver Pro SPK4042

Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)

Item #: 180SPK4042

(8)

$49.99
Add to Cart
Bojo Trim Panel Tools

Bojo Trim Panel Tools

Set of 6 pry tools — helps remove interior and exterior trim and door panels

Item #: 126CR6LNGL

(2)

$29.99
Add to Cart
DEI Heat Shrink Tubing

DEI Heat Shrink Tubing

Black 4-foot length (Assortment)

Item #: 696010839

(7)

$24.99
Add to Cart
InstallCard: Amp or Equalizer

InstallCard: Amp or Equalizer

Prepaid professional amplifier or EQ installation

Item #: 597421003

(18)

$79.99
Add to Cart
T-Spec 2-Channel RCA Patch Cables

T-Spec 2-Channel RCA Patch Cables

Available in 7 different lengths (20-foot)

Item #: 120RCA202

(27)

$20.99
Add to Cart
EFX 17-foot RCA Patch Cable

EFX 17-foot RCA Patch Cable

Item #: 142A17C

(55)

$7.99
After $2.00 Savings Add to Cart