About the Kenwood Marine Bass Package
Bring better bass to your boat
Bring better bass to your boat
This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power amplifier. It's a combo that's sure to shape up the bass in your boat.
Kenwood's KFC-W250MRW 10" marine subwoofer combines a strong, waterproof polypropylene cone with a rubber surround that'll hold up to humidity and UV exposure. A tough white plastic shell protects the basket and magnet against corrosion, and the sub's integrated white plastic grille matches the interior of many boats. The sub's dual-voice coil design ensures you'll get maximum power out of the amp.
Kenwood designed this marine subwoofer for free-air use, so it'll produce great bass when mounted into a panel or bulkhead — no box required. Stainless steel mounting hardware is included.
The KAC-210MR marine amplifier packs plenty of power into a small package, thanks to Kenwood's engineering expertise. Special coated circuit boards ensure the amp will keep the power flowing even after prolonged exposure to dampness. The amp's output is tailored to work perfectly with the subwoofer.
Product highlights:
- package includes KFC-W253MRS marine subwoofer and KAC-210MR amplifier
KAC-210MR mono amplifier
- 200 watts maximum power output
- 80 Hz low-pass filter (12 dB/octave)
- 15" power harness and 15" speaker wiring harness included (harnesses use special plugs if extra wire length is needed, it must be spliced to the harnesses)
- preamp-level inputs
- 7-11/16"W x 1-3/16"H x 6-1/8"D
- warranty: 1 year
KFC-W253MRS 10" marine subwoofer
- dual 1.5-ohm voice coils
- pearl mica polypropylene woofer with rubber surround
- power handling: 50-200 watts RMS
- sensitivity: 91 dB
- top-mount depth: 5-3/8"
- designed for free-air use
- warranty: 1 year
- MFR # P-WD253MRS
What's in the box:
Kenwood Marine Bass Package owner's manual
- 10" KFC-W253MRS Dual 1.5 ohm voice coil marine woofer
- Six 1-1/8" Self-tapping screws
- 6 Speed clips
- Woofer manual (English/ French/ Spanish)
- Woofer template
- KAC-210MR amplifier
- 2 Mounting brackets
- 15" Power harness
- 15" Speaker output harness
- Four M4x8mm Machine screws
- Four 5/8" Self-tapping screws
- Amplifier manual (English/ French/ Spanish)
- Amplifier warranty information
Customer reviews for Kenwood Marine Bass Package
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood Marine Bass Package
Product Research
Features
Inputs and Outputs
Specifications
Features
Overview: This package includes a dual voice coil subwoofer and a matched amplifier with a maximum output of 200 watts.
UV and Water Resistant: The subwoofer features a UV-resistant silver grille, waterproof polypropylene cone, rubber surround, and stainless steel mounting hardware. The tinsel leads are coated and the speaker terminals are gold-plated to guard against corrosion. The amplifier has a special coated circuit board to protect it against the marine environment.
Free-Air Subwoofer Design: The woofer is designed for mounting in an infinite baffle (free-air) application, so no enclosure is necessary.
Inputs and Outputs
Amp:
- Power: 10-pin jack for use with the supplied harness; the harness has two power leads, each with an in-line 5 amp fuse
- Subwoofer Output: 4-pin jack for use with the supplied harness
- Line In: left and right RCA audio jacks
Sub:
- Input Terminals: the speaker has quick-slide terminals and requires quick-slide connectors (not included) to attach the wire; the positive terminals are 0.25" wide and the negative terminals are 0.187" wide
Specifications
Amp:
- Maximum Output: 200 watts
- Signal-to-Noise Ratio: 85 dB
- Low-pass Filter Frequency: 80 Hz
- Output Impedance: 1.5Ω + 1.5Ω
- Dimensions:
- Width: 7.7" (9.1" including mounting bracket)
- Height: 1.25" (1.48" including mounting bracket)
- Depth: 6.125" (7.35" including wiring)
Sub:
- Maximum Power: 200 watts
- Impedance: 1.5Ω + 1.5Ω
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
I was looking for a sub to install in the driver kick panel of my boat that still sounded great. This sub/amp combo really thumps. It really rivals some of the top subs that you'd install in a custom enclosure. If space is an issue, this is a great solution.
dogbert from Austin, TX