Inputs and Outputs
Overview: This package includes
a KFC-W250MRW dual voice coil marine subwoofer and a KAC-210MR mono amplifier
designed for use with the subwoofer.
UV and Water Resistant:
The subwoofer features a UV-resistant white grille, waterproof
pearl mica polypropylene cone, rubber surround, and stainless steel mounting
hardware. The tinsel leads are coated and the speaker terminals are
gold-plated to guard against corrosion. The amplifier has a special coated
circuit board to protect it against the marine environment.
Free-Air Subwoofer Design: The
woofer is designed for mounting in an infinite baffle (free-air) application, so
no enclosure is necessary.
Vented Voice Coil:
The subwoofer's vented voice coil allows air to circulate in the voice coil gap,
helping dissipate heat, resulting in greater power handling and increased
Subwoofer Mounting: The
measurements in the Crutchfield database are taken without the grille. With the
grille installed, the mounting height increases to 0.983" and the frame diameter
increases to 10.766".
Matching Amplifier: The KAC-210MR mono amplifier is a special
amplifier designed to handle the low impedance load of the subwoofer. The
subwoofer has dual 1.5-ohm voice coils, and when connected in parallel to the
amplifier, present a 0.75-ohm load to the amp.
Fixed Input Sensitivity: The amp has a fixed input sensitivity of 60mV
(0.06 volts). There is no gain control on the amplifier.
Note: In order to control the volume of the subwoofer relative to the
rest of the system, you will need a head unit with a variable volume control
on the subwoofer preamp output, or an external remote level control (such as
Low-pass Filter: The amplifier has a low-pass filter with a fixed
cutoff frequency of 80Hz.
Inputs and Outputs
10-pin jack for use with the supplied Connector cord
- Subwoofer Output: 4-pin
jack for use with the supplied Speaker cord
- Line In: Stereo
RCA audio jacks
- Maximum Output: 200 watts
- Signal-to-Noise Ratio: 85
- Low-pass Filter Frequency:
- Sensitivity/Input Impedance: 60mV / 10 kΩ
- Output Impedance: 1.5 Ω + 1.5 Ω = 0.75
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.