Chat
Contact us
Close contact box
Connect ID #
298 569 797 4
Connect ID #
298 569 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kenwood Marine Bass Package Includes KFC-W250MRW 10" marine subwoofer and KAC-210MR amplifier (White KFC-W250MRW subwoofer)

Item # 113PWD250M

This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power...

This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power...

6 questions - 8 answers

Item # 113PWD250M

Shop all Kenwood Marine Subwoofers

About the Kenwood Marine Bass Package

Ken Nail

Bring better bass to your boat

This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power amplifier. It's a combo that's sure to shape up the bass in your boat.

Bring better bass to your boat

This Kenwood P-WD250MRW marine bass package includes a water-resistant 10" subwoofer and a compact power amplifier. It's a combo that's sure to shape up the bass in your boat.

Kenwood's KFC-W250MRW 10" marine subwoofer combines a strong, waterproof polypropylene cone with a rubber surround that'll hold up to humidity and UV exposure. A tough white plastic shell protects the basket and magnet against corrosion, and the sub's integrated white plastic grille matches the interior of many boats. The sub's dual-voice coil design ensures you'll get maximum power out of the amp.

Kenwood designed this marine subwoofer for free-air use, so it'll produce great bass when mounted into a panel or bulkhead — no box required. Stainless steel mounting hardware is included.

The KAC-210MR marine amplifier packs plenty of power into a small package, thanks to Kenwood's engineering expertise. Special coated circuit boards ensure the amp will keep the power flowing even after prolonged exposure to dampness. The amp's output is tailored to work perfectly with the subwoofer.

READ LESS

Product highlights:

  • package includes KFC-W250MRW marine subwoofer and KAC-210MR amplifier
KAC-210MR mono amplifier
  • 200 watts maximum power output
  • 80 Hz low-pass filter (12 dB/octave)
  • 15" power harness and 15" speaker wiring harness included (harnesses use special plugs — if extra wire length is needed, it must be spliced to the harnesses)
  • 7-11/16"W x 1-3/16"H x 6-1/8"D
  • warranty: 1 year
KFC-W250MRW 10" marine subwoofer
  • dual 1.5-ohm voice coils
  • pearl mica polypropylene woofer with rubber surround
  • power handling: 50-200 watts RMS
  • sensitivity: 91 dB
  • top-mount depth: 5-5/16"
  • designed for free-air use
  • warranty: 1 year
  • MFR # P-WD250MRW

What's in the box:

  • The Main box contains two smaller boxes (Subwoofer box/Amplifier box):
  •  The Subwoofer box contains:
  • 10" Marine subwoofer
  • White grille (attached)
  • 6 Stainless steel self-tapping screws
  • 6 Stainless steel speed clips
  • Instruction Manual (Eng/ Fren/ Span)
  • Template
  • The Amplifier box contains:
  • KAC-210MR Power amplifier
  • 15" Connector cord (has two in-line 5A fuses)
  • 15" Speaker cord
  • 2 Metal mounting brackets
  • 4 Self-tapping screws
  • 4 Machine screws (each screw has one flat washer and one lock washer)
  • Instruction Manual (Eng/ Fren/ Span)
  • Warranty Card

Customer reviews for Kenwood Marine Bass Package

Loading reviews...

Average review:

4.5 out of 5 stars
28 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kenwood Marine Bass Package

Pat M.
The Kenwood Marine Bass Package replaces these items:

Product Research

Subwoofer Features
Amp Features
Inputs and Outputs
Specifications

Subwoofer Features

Overview: This package includes a KFC-W250MRW dual voice coil marine subwoofer and a KAC-210MR mono amplifier designed for use with the subwoofer.

UV and Water Resistant: The subwoofer features a UV-resistant white grille, waterproof pearl mica polypropylene cone, rubber surround, and stainless steel mounting hardware. The tinsel leads are coated and the speaker terminals are gold-plated to guard against corrosion. The amplifier has a special coated circuit board to protect it against the marine environment.

Free-Air Subwoofer Design: The woofer is designed for mounting in an infinite baffle (free-air) application, so no enclosure is necessary.

Vented Voice Coil: The subwoofer's vented voice coil allows air to circulate in the voice coil gap, helping dissipate heat, resulting in greater power handling and increased reliability.

Subwoofer Mounting: The measurements in the Crutchfield database are taken without the grille. With the grille installed, the mounting height increases to 0.983" and the frame diameter increases to 10.766".

Amp Features

Matching Amplifier: The KAC-210MR mono amplifier is a special amplifier designed to handle the low impedance load of the subwoofer. The subwoofer has dual 1.5-ohm voice coils, and when connected in parallel to the amplifier, present a 0.75-ohm load to the amp.

Fixed Input Sensitivity: The amp has a fixed input sensitivity of 60mV (0.06 volts). There is no gain control on the amplifier.

Note: In order to control the volume of the subwoofer relative to the rest of the system, you will need a head unit with a variable volume control on the subwoofer preamp output, or an external remote level control (such as 136CLRLC).

Low-pass Filter: The amplifier has a low-pass filter with a fixed cutoff frequency of 80Hz.

Inputs and Outputs

Amp Unit:

  • Power: 10-pin jack for use with the supplied Connector cord
  • Subwoofer Output: 4-pin jack for use with the supplied Speaker cord
  • Line In: Stereo RCA audio jacks
Specifications

Amp Unit:

  • Maximum Output: 200 watts
  • Signal-to-Noise Ratio: 85 dB
  • Low-pass Filter Frequency: 80 Hz
  • Sensitivity/Input Impedance: 60mV / 10 kΩ
  • Output Impedance: 1.5 Ω + 1.5 Ω = 0.75 Ω

Loading accessories...

Customer Q&A

6 questions already asked

Q
I have a blue tooth bazooka 6 speaker sound bar on my ATV, and it has a 3.5mm output port for a subwoofer, or so bazooka says. If I were to get a 3.5mm - DUAL RCA output cord, would this amp and sub work with that as an input from the sound bar?
spgeno  Oct 10, 2017
1 answer
A
Based on the information you've provided, yes, that should work. You can use the 80Hz low pass crossover of the Kenwood amp to eliminate the mid-range & high frequencies from the subwoofer. I hope that helps. My Bio: https://www.crutchfield.com/bio/Ryan
ryan  Oct 19, 2017 (Staff)
Q
I installed this speaker and amp combo in my boat. When I energized the power the speaker was cutting in and out and the blue power light on the amp was flickering. The louder the music was turned up the less the speaker would work at all? I installed the system the same as the diagram showed and I am not sure why the amp is powering on and off. Any help will be greatly appreciated.
robert  May 09, 2017
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kristina  May 12, 2017 (Staff)
Q
Can this woofer be mounted in a sealed enclosure? I'm planning to purchase an want mount in a sealed speaker box under the passengers seat of my Polaris Ranger XP.
leathan  Jun 29, 2016
1 answer
A
iF YOU PLACE THIS SPEAKER "INSIDE" A COMPARTMENT, YOU WILL LOSE A LOT OF PUNCH. BUT YOU CAN DEFINATELY DO IT..
michael  Jun 29, 2016
Q
I am having this Kenwood sub. and amp. installed in my boat, and would like to know how much hollow space is needed behind it to make it sound best?
mike  May 04, 2016
3 answers
A
It is a free-air sub so you don't need hardly any space just make sure the magnet is not touching the boat in the back and you will be fine.
mark  May 05, 2016
A
I will say not much. I have mine installed in the bottom of my port side bench. Its also a storage compartment crammed with stuff so not much breathing room back there . It sounds really good. Im pleased. Its installed on a searay 240 sundeck.
michael  May 05, 2016
A
I Have about 12 inches and it sounds good.
chris  May 04, 2016
Q
What would be the best way to wire this set up ? Should I parallel or in series and should I bridge the amp ?
louis  Apr 15, 2014
1 answer
A
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss the best option for wiring. They will be able to pull up your gear and see how this will best integrate.
jeff  Apr 21, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound