About the Kenwood KFC-W3012
Kenwood's KFC Series high-performance subwoofers pound out big, full-bodied bass without sacrificing sound quality. Textured polypropylene cones offer extra rigidity for accurate bass output, while durable urethane foam surrounds facilitate long cone excursion for deeper low notes.
The KFC-W3012 12" subwoofer features a single 4-ohm voice coil, handling up to 400 watts RMS. Silver-plated push terminals provide clean contact points for your wiring. You can explore different mounting options with the reversible trim ring.
Product highlights:
- 12" 4-ohm subwoofer
- textured polypropylene cone with urethane foam surround
- power range: 50-400 watts RMS
- peak power handling: 1,200 watts
- frequency response: 39-300 Hz
- sensitivity: 86 dB
- top-mount depth: 6-1/4"
- sealed box volume: 0.75-1.75 cubic feet
- ported box volume: 1.0-2.0 cubic feet
- warranty: 1 year
- MFR # KFC-W3012
What's in the box:
Kenwood KFC-W3012 owner's manual
- One 12" woofer
- Self-adhesive foam strip
- 8 Mounting screws (3/16" x 1-3/8")
- Instruction Manual with cutout template (Eng/Span/Fren)
- Warranty Card
Customer reviews for Kenwood KFC-W3012
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KFC-W3012
Features & specs
Features and Specs | ||
---|---|---|
Size | 12 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Urethane foam | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
86 dB at 1 watt | |
Frequency Response | 39 - 300 Hz | |
Max RMS Power Handling | 400 | |
Peak Power Handling (Watts) | 1200 | |
Top Mount Depth (inches) | 6 1/4 | |
Bottom Mount Depth (inches) | 7 | |
Cutout Diameter or Length (inches) | 11 | |
Frame Width | 12.75 | |
Frame Length | 12.75 | |
Vas (liters) | 62 | |
Fs (Hz) | 31 | |
Qts | 1.012 | |
Xmax (millimeters) | 13.8 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.25 | |
Minimum Sealed Box Volume (cubic feet) | 0.75 | |
Maximum Sealed Box Volume (cubic feet) | 1.75 | |
Ideal Ported Box Volume (cubic feet) | 1.5 | |
Minimum Ported Box Volume (cubic feet) | 1 | |
Maximum Ported Box Volume (cubic feet) | 2 |
Product Research
Features
Enclosure Compatibility
Features
Woofer: The cone is constructed of polypropylene with a cosmetic fiber texture.
Surround Material: The woofer utilizes a high excursion urethane foam for added durability and better bass performance.
Super Linear Spider: The woofer features a Super Linear Spider design. In this design, the Spider roll gradually becomes higher towards the center enabling this area to withstand more stress with less stretching. This design transfers up and down movement outward to reduce stretching the center area of the woofer. Because the spider's outward portion has more surface area to better dissipate stress from the center, this helps to reduce mechanical damage during increased excursion and enables the subwoofer to withstand more power.
Long Stroke Design: The pole piece has been extended to provide a more linear magnetic field for woofer operation. This lowers distortion and provides the woofer with better low frequency response.
Double Stacked Magnet: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.
Spring Post Assembly: The woofer features a compression input terminal assembly that will accept up to 8-gauge speaker wire.
Enclosure Compatibility
Sealed Box Volume: The sealed box sizes recommended by Kenwood range from 0.75 cu/ft to 1.75 cu/ft. Within this range, the ideal size recommended by Kenwood is 1.25 cu/ft.
Vented Box Volume: The vented box sizes recommended by Kenwood range from 1.0 cu/ft to 2.0 cu/ft. Within this range, the ideal size recommended by Kenwood is 1.5 cu/ft. The enclosure recommended by Kenwood has a slot port, 1-3/8" wide, 12-11/16" high, and 18-7/8" long.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great pair of subs. I have a real "BUDGET" setup. I used this sub to replace an old sony xlpod subwoofer..... big difference! Very clean sounding bass running from an xplod amp bridged @ 500rms watts @4 ohm, sounds better than two 12's in many other setups. The sub handles power really well!
icecold5003 from miami, fl