1.888.955.6000
crutchfield.com
Crutchfield

Kenwood Excelon XR-4S

4-channel car amplifier — 120 watts RMS x 4 at 4 ohms (New Stock)

Zoom
  • Kenwood Excelon XR-4S

    Front

  • Kenwood Excelon XR-4S

    Back

  • Kenwood Excelon XR-4S

Crutchfield OMC logo
We don't check this item for fit or compatibility.
Item #: 113XR4S
 

Review Summary

DISCONTINUED
 
This item is no longer available to purchase.
 
Contact us for other options
 
Call   Email  
 
Original price $349.99
We recommend this similar item, or shop all All Car Amplifiers
 
 
 
 
 

Our take on the Kenwood Excelon XR-4S

by Buck Pomerantz
Kenwood

My system has plenty of power. Who needs an amp?

You might think you don't need an amp because you have a 400-watt system in your car, or because your new stereo puts out 50 watts a channel. But those are peak wattage ratings, which may boil down to 15 or 20 watts per channel, using the more realistic RMS rating. An amp sends your speakers the power they need to deliver your music with clarity and impact, whether you're using factory speakers or high-performance components. And low-frequency reproduction requires lots of power, so an amp is an absolute must if you're adding a sub to your system.

You can add a dose of potent power to your system, thanks to the special design of the Kenwood Excelon XR-4S amplifier. Its dual power supplies and efficient Class D design let this amp deliver massive amounts of power to your speakers from a compact chassis that'll fit in more places than traditional amps can.

The XR-4S offers impressive versatility when it comes to setting up your system. You can use it in 4-channel mode to drive your front and rear speakers, with 120 watts RMS per channel. You can also set it to bi-amp mode when you're powering a component speaker system, and drive the tweeters with the front channels and the midrange speakers with the rear channels.

Got a sub? You can bridge the rear channels to drive a subwoofer, while the front channels power your full-range speakers. The built-in high- and low-pass filters let you tailor the amp's output so you can dial in the best possible performance for the speakers in your vehicle.

See more info on this item

Highlights:

  • 4-channel amplifier
  • 120 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
  • 300 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • variable high- and low-pass filters (50-200 Hz; 2.5K-10k Hz, 12 dB/octave)
  • Class-D amplifier design
  • frequency response: 20-20k Hz
  • preamp inputs
  • fuse rating: 30A x 2
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 9-1/4"W x 2-1/16"H x 7-9/16"D
  • warranty: 2 years
  • Our 60-day money-back guarantee

Hands-on research from the Crutchfield Labs (what are the Labs?)

Features and Specs
Performance
RMS Power Output (Watts x Channels)
Loading...
120 x 4
Peak Power Output (Watts x Channels)
Loading...
300 x 4
Power at 2 Ohms (Watts x Channels)
Loading...
150 x 4
Bridged Power (Watts x Channels)
Loading...
300 x 2
Minimum Impedance Bridged
Loading...
4
Minimum Impedance Unbridged
Loading...
2
Best Frequency Response
Loading...
20-20k Hz
THD at Rated RMS Power
Loading...
1%
Signal to Noise Ratio
Loading...
73 dB
Input Voltage
Loading...
14.4v
Features
Amplifier Class
Loading...
D
Low-Pass Crossover Frequency
Loading...
50-200Hz/2.5-10kHz
Low-Pass Slope (dB/octave)
Loading...
12 dB/oct
High-Pass Crossover Frequency
Loading...
50-200Hz/2.5-10kHz
High-Pass Slope (dB/octave)
Loading...
12 dB/oct
Bass Boost
Loading...
No
Bass Boost Frequency
Loading...
N/A
Fan Cooled
Loading...
Yes
Fuse Rating
Loading...
60
Speaker Level Inputs
Loading...
No
Preamp Outputs
Loading...
No
Width (inches)
Loading...
9-5/16
Height (inches)
Loading...
2-1/8
Depth (inches)
Loading...
8-9/16
Parts Warranty
Loading...
2 Years
Labor Warranty
Loading...
2 Years
Product Research
What's in the box?

Download owner's manual

  • 4-Channel Excelon amplifier
  • Two 30-amp ATO fuses (installed)
  • 4 Self-tapping screws
  • Rubber terminal cover
  • 4mm Allen wrench
  • 2.5mm Allen wrench
  • Instruction Manual (English/ French/ Spanish)
  • Warranty Card

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team — they open the box, verify contents, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Features
Controls
Connections

Features

CEA 2006 Compliant: The XR-4S's power ratings are measured according to the strict standards dictated by the Consumer Electronics Association (CEA). These standards allow you to accurately compare the rated power output of all CEA 2006-compliant amplifiers. Manufacturers who adhere to the standards can display the CEA 2006 logo on their products and packaging. The amplifier features the following power specifications:

  • 4-Ohm RMS Power Rating: 120 watts x 4-channels into 4-ohms, measured from 20-20 kHz, at 14.4 volts, with no more than 1% THD+noise
  • Bridged RMS Power Rating: 300 watts x 2-channels into 4-ohms at 1 kHz with 1% THD
  • 2-Ohm RMS Power Rating: 150 watts x 4-channels into 2-ohms at 1 kHz with 1% THD
  • Max Power Output: 1200 watts (300 watts x 4-channels) Peak

Class D Amplifier: Class D amps are very efficient and their small size offers installation flexibility. Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Class-D amplifiers transform very little power into heat, so a higher percentage of the power supply is transformed into the load. This results in a very compact amp which needs less input power to produce very high output power.

Dual Power Supply: This design provides one power supply for positive current and one power supply for negative current. The result is a cleaner voltage source, fewer failures due to short circuit, less power loss due to variances in transformer tolerances, and less transformer noise even when the positive and negative loads are unstable.

Cooling Fan: There is a cooling fan and vents on each side of the amplifier to help dissipate heat and ensure cool, reliable operation. Make sure not to block these vents or the fan when you install the amplifier.

Protection circuitry: The XR-4S features protection circuits that will turn the amp off in case of the following events:

  • Speaker wire short-circuits
  • Speaker output contacts ground
  • Amp overheats
  • Unit malfunctions and DC is sent to speaker output

Controls

Input Sensitivity: The XR-4S features two gain controls, one for each 2-channel section of the amplifier (A and B). The input sensitivity of each is adjustable from 0.2 volts to 5.0 volts.

Input Select: Set the input select to AB when using both line inputs; set to A when using only one set of inputs to feed all four amplifier channels.

Filter Switch: The A and B sections of the amplifier have individual switches to set the crossover to low-pass, off (full range), or high-pass.

Frequency Range: The A and B sections of the amplifier have individual switches to set the crossover frequency range to high (2.5 kHz to 10 kHz) or low (50 Hz to 200 Hz).

Filter Frequency: The continuously variable crossover frequency range changes depending on the setting of the Frequency Range switch; 50 Hz to 200 Hz in the low position, 2.5 kHz to 10 kHz in the high position. The filter frequency is individually adjustable for the A and B sides of the amplifier.

Connections

Power And Ground Terminals: The amplifier features Allen head set-screw Power and Ground terminals that will accommodate up to 4 gauge wire. 6 gauge minimum is recommended.

Remote Turn-On Terminal: The remote turn-on is an Allen head set-screw terminal that will accommodate up to 8 gauge wire.

Speaker Terminals: The four speaker terminals are Allen head set-screw terminals that will accommodate up to 8 gauge wire. 12 gauge minimum is recommended.

RCA Inputs: The amplifier features two pair of gold-plated RCA input connections.

Fuse: The amplifier contains two 30-amp fuses.

 
Review this product
Great Gear Giveaway rewards card

Submit a review and then enter to win a $500 rewards card

Kenwood Excelon XR-4S Reviews

Average Customer Review:

8 people say:

Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left
Filter by rating:
5 out of 5

Excellent

Written By iows, Las Vegas on Friday, April 19, 2013
Crutchfield Customer Review (What's this?)
 
Purchased as part of a complete system upgrade for a 1979 MGB. Kenwood BT955HD, Polk MM6501, Polk MM691, Kenwood KSC-SW11 sub woofer. Class D was chosen because they draw less current and run cooler which is a concern in Las Vegas. Exceeds expectations. I love the sound.
Pros:
Lower current demand than AB amps. Lower temperatures. Class D in theory are over 90% efficient, Class AB somewhere over 60% efficient, waste is heat.
Cons:
It does run hotter than expected. Very warm to the touch BUT NOT painfully hot to the touch like the previous AB amps. Previous amps ( 2 amps, 2X100RMS ) worked fine but were both over 10 years old and it seemed a good time to replace them.
Was this review helpful?    Yes | No
 
5 out of 5

Great amp at a great bargain!

Written By Brian P, Menifee, CA on Sunday, February 24, 2013
Crutchfield Customer Review (What's this?)
 
I got this amp for my son's car and it sounds great! I got it as a refurbished product and paid half the cost. I have it running in a 2008 Scion XB running the front channel on the front speakers and the back channel running a JL Audio bass tube. Sounds great!
Pros:
Great size and power! Takes up less space.
Cons:
None so far
1 out of 1 people found this helpful
Was this review helpful?    Yes | No
 
4 out of 5

Great Amp!

Written By Michael, Hillsboro, OR on Friday, August 19, 2011
 
I recently upgraded the audio system in my 2007 Dodge Ram MegaCab and purchased this amp after having it recommended to me by a friend who loves his tunes. The first amp I used did not meet my needs or expectations.

I power a Hertz HSK-165 2-way component speaker system for the front stage. The rear door speakers are Alpine SPR 60's that are powered by the head unit for rear fill. To top it off, I have an older Focal 33A sub driven by a Blaupunkt amp.

This amp matches up very nicely with the HSK's. The soundstage is wall to wall and up in front. The frequency response and tonal quality of the HSK's really shine with this amp. There is no distortion at higher volumes and the sound reproduction is crisp, clear and clean.

While this amp is not necessarily top of the line equipment for the audiophile, I would definitely recommend this amp to anyone who wants to get the best out of their system, especially if you have upgraded to a nice set of component speakers.
Was this review helpful?    Yes | No
 
4 out of 5

Nice power in a small package!

Written By Riveted1, Gilbert, AZ on Sunday, June 26, 2011
Crutchfield Customer Review (What's this?)
 
Does what it's supposed to do. Amplifies the sound without any discernable coloration. Crossovers work well. Way more efficient than my previous class A/B amp. Tiny, so it's easy to hide away. Can't really say anything negative about it!
2 out of 4 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great Amplifier/Little Money

Written By bobbyg, Flagstaff, AZ on Friday, June 24, 2011
Crutchfield Customer Review (What's this?)
 
I Purchased this amplifier a couple of weeks ago as a refurbished unit. I had some reservations about buying a refurbished unit but the price is really great and you have a 90 day period to shake out problems. The Amp works great in my 2009 Chevrolet 3500 crew cab. I mounted the Amp along with another Amp for subs along the back wall of the truck cab. The hardest part there is removing the back seat, (a two person job). I also replaced all of the door speakers with high quality alpine componet speakers. I run the amp through the factory stereo with a clean sweep prosesser, There is no compairison between the new stereo set up vs. the factory system. Take then time to get your amps adjusted properly for clean sound. Once you reinstall the back seat, your access to the amps goes away! I am really happy with the set up!
Was this review helpful?    Yes | No
 
4 out of 5

Ignore Negative Comments

Written By JohnnyDeluxe, Miami, Fl on Monday, May 02, 2011
 
Given that I had a full JL Audio setup in my previous vehicle, I had something to compare this setup with.

Before purchasing, I read numerous reviews and had mixed feelings about these Kenwood digital amps (XR-1S for bass) but I got a great deal through another distributor so I took the plunge.

Speaker selection for the XR-4S is a pair of Hertz HSK165 Comps up front (wow!) and my old JL XR650 Coax's rear (and yes, they're struggling to keep up).

Speaker selection for the XR-1S is a pair of JL 10W1v2's.

Pros: *These amps produce a lot of clean power. *Bi-Amp connection (A&B), great feature for independent tweaking. *VIF (XR-1S only), another great feature. *Bass (XR-1S) is tight and punchy *Small footprint.

Cons: *Pricey *Adjustment settings are very sensitive. *They get hot. *Bass Boost on XR-1S (accessory pt # KCA-WR10 is nearly insignificant. (these are all small issues)

The results thus far have been quite satisfying. Sure, they're not my old JL Audio system BUT they are far more than what I initially expected!
Ultimately I didn't give 'em 5 stars because sound quality just slightly diminishes when operating at peak output, HOWEVER THIS MAY BE DUE TO MY OLD, TIRED JL COAX's IN THE REAR (I'll change 'em out in the future and post updated results).

*Side Notes: *Sound deadening material and high quality cables (StreetWires O/F) were used throughout, including battery grounding cable upgrade (as suggested by other reviewer), enhancing sound quality significantly.
3 out of 3 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

great amp if you do 2 things

Written By thomas, seattle. wa on Monday, July 05, 2010
 
I had this amp professionally installed and was not happy with it until i tweaked it.
controls are easy to access and adjust. Just remember to follow the manufacturers installation notes. Set the input to match the maximum preamp output voltage of the head unit (do not set the input "by ear" as many professionals will attempt).
Next, upgrade the ground wire from the battery to the grounding point on the vehicle. This changed the amp from an ok sounding amp to a great sounding amp (another step the professionals felt was unnecessary)
6 out of 8 people found this helpful
Was this review helpful?    Yes | No
 
5 out of 5

Great Little Amp

Written By Chris, Montclair, NJ on Wednesday, May 13, 2009
 
This is a great little amp. Period. It is well made, just as nice as the Alpine PDX, and the Pioneer Premier ICE, only this one is even more compact. Sound is extremely clear and spacious, whatever Kenwood did they did it right. The XR-4S does not sound like a class D amplifier at all; no audible distortion to speak of.

Things to like: nice feel, heavy, has a cooling fan, full range class D, simple and easy set up. Things to not like: crossover is not variable full range, it can either be set for highs (bi amp to tweeters) or lows (bi amp to woofers or tri amped to subwoofer), or off for full range sound. Would like a little more control here, but I have some flexiblity through the tuning capabilities of my Alpine head unit, so this is not a problem for me.

The amp has two side vents covered by silver grills for flow through ventilation, on the front side where the crossover and input controls are located is also where the fan is located. The unit runs very cool, so far I have really pushed the amp and have not see the fan kick on or the high temperature light come on.

The amplifier is so small and compact it looks like a toy until you pick it up. It is supposed to weight seven pounds, it makes my old 50 watts x 4 seem like a toy. But this Kenwood if good for 120 watts x 4.




17 out of 20 people found this helpful
Was this review helpful?    Yes | No
 

Add accessories for the Kenwood Excelon XR-4S

You'll need an amp wiring kit to install your new amplifier, as wiring is not included. See all categories & accessories

EFX PA4BX Wiring Kit 4-gauge amplifier wiring kit — includes 2-channel patch cable
1 person says
Your Price: $79.99
Add to Cart
Kicker PK4 4-gauge amplifier power wiring kit
Your Price: $129.99
Add to Cart
Rockford Fosgate RFK4 4-gauge amplifier power wiring kit
10 people say
Your Price: $114.99
Add to Cart
Rockford Fosgate RFK4X Complete 4-gauge amplifier wiring kit
Includes patch cable and speaker wire
12 people say
Your Price: $159.99
Add to Cart
T-Spec 16-gauge Speaker Wire Black/white jacket — priced per foot
11 people say
Your Price: $0.69
Add to Cart
T-Spec 12-gauge Speaker Wire Black/white jacket — priced per foot
27 people say
Your Price: $1.99
Add to Cart
Stinger PRO Series 16-gauge Speaker Wire Black jacket — priced per foot
46 people say
Your Price: $0.39
Add to Cart
T-Spec 2-Channel RCA Patch Cables Available in 7 different lengths (17-foot)
23 people say
Your Price: $19.99
Add to Cart
7 people say
Your Price: $29.99
Add to Cart
52 people say
Your Price: $9.99
Add to Cart
EFX CFHG4 Fuse Holder In-line AGU fuse holder accepts 4- to 8-gauge wire
Your Price: $9.99
Add to Cart
Rockford Fosgate RFFAGU Fuse Holder Platinum-plated AGU fuse holder
Fits 4- or 8-gauge cable
25 people say
Your Price: $10.99
Add to Cart
T-Spec Capacitor 1.5-farad capacitor with red LCD meter
9 people say
Your Price: $79.99
Add to Cart
Metra Crimp Tool and Connectors Package contains crimp tool and over 150 pieces
15 people say
Your Price: $19.99
Add to Cart
S&G Wire Cutter/Stripper Tool Cuts and strips 12- to 22-gauge wire
14 people say
Your Price: $19.99
Add to Cart
S&G Tool Aid 87650 Door Trim and Panel Removal Tool
66 people say
Your Price: $9.99
Add to Cart
Pro.Fit Wire Worm Installation tool helps route wiring through tight spaces
28 people say
Your Price: $12.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
51 people say
Your Price: $24.99
Add to Cart
Skewdriver Pro SPK4042 Ratcheting straight and offset screwdriver set with 40 bits (Skewdriver Pro with ratchet handle, pictured)
8 people say
Your Price: $49.99
Add to Cart
Bojo Trim Panel Tools Set of 6 pry tools — helps remove interior and exterior trim and door panels
2 people say
Your Price: $29.99
Add to Cart

Why choose SquareTrade?

The #1-Rated Protection Plan

Thousands of people have reviewed SquareTrade Protection Plans — and made us #1.

5-Day Service Guarantee & Free Shipping

We'll repair or replace your item in five business days or less after we've received it, or your plan is free. And, as always, we pay for all shipping.

Protection from Normal, Everyday Use

Repairing your average mechanical or electrical failure can cost as much as buying a new device. With SquareTrade, you're covered — including parts and labor.

3 Year Protection Plan
3 Year Protection Plan
Your Price: $49.99
Add to Cart

For a more in-depth review and enhanced detailed information on the Kenwood Excelon XR-4S, please visit the Crutchfield website product page (/ISEO-rccbcspd/p_113XR4S/Kenwood-Excelon-XR-4S.html ).