About the Kenwood Excelon XR-W10F
The Kenwood Excelon XR-W10F 10" subwoofer produces serious bass output in the hard-to-fit areas of your compact car or truck. This shallow-mount sub measures just over 3" deep, so you can really get creative with your installation.
Big cone, big bass
The extremely light glass-fiber cone is 25% larger than last year's model, employing a honeycomb pattern that delivers quick response in demanding conditions without flexing. More cone surface area means this sub can move more air, so this design gives you powerful, accurate bass out of an extremely compact speaker. It's like getting an 11" sub in a 10" frame.
Innovative design
The sturdy butyl rubber surround helps to control the cone, so this woofer can rock hard without losing its punch. The cast aluminum basket offers a unique design that vents air out from the back and all sides of the subwoofer for exceptional heat dissipation. Pair this sub with the right amp and enclosure, and you'll get some powerful bass without losing too much space in your vehicle.
Subwoofer Wiring Diagrams
To see sample wiring diagrams for all common subwoofer/amplifier combinations, check out this informative article.
Product highlights:
- 10" 4-ohm shallow-mount subwoofer
- carbon-glass fiber composite cone with butyl rubber surround
- spring post terminals handle up to 8-gauge wire
- cast aluminum basket
- power range: 50-350 watts RMS
- peak power: 1,200 watts
- frequency response: 41-200 Hz
- sensitivity: 83.5 dB
- mounting depth: 3-1/8"
- grille not included
- warranty: 2 years
- MFR # XR-W10F
What's in the box:
Kenwood Excelon XR-W10F owner's manual
- One 10" SVC Woofer
- Eight 1-1/8" Self-tapping screws
- Cardboard template
- Instruction manual (English/ French/ Spanish/ Portuguese)
- Warranty information
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Kenwood Excelon XR-W10F
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood Excelon XR-W10F
Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | 4 | |
Cone Material | Carbon-glass fiber | |
Surround Material | Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
83.5 dB at 1 watt | |
Frequency Response | 41 - 200 Hz | |
Max RMS Power Handling | 350 | |
Peak Power Handling (Watts) | 1200 | |
Top Mount Depth (inches) | 3 3/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 3/16 | |
Frame Width | 10.811 | |
Frame Length | 10.811 | |
Vas (liters) | 32.9 | |
Fs (Hz) | 36 | |
Qts | 0.783 | |
Xmax (millimeters) | 7.5 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.6 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Flat Subwoofer: The Kenwood Excelon flat subwoofer design is approximately 40% slimmer (less deep) than a standard subwoofer. This makes it ideal for installation in tight spaces, such as behind or under the seat of a pickup truck.
Carbon-Glass Fiber Cone: The carbon-glass fiber cone uses a honeycomb design which is simultaneously efficient and durable.
Rubber Surround: The woofer features a smooth linear rubber surround for added durability and increased excursion resulting in exceptional deep bass response.
Heat Transfer System: The XR-W10F features a dual ventilation system designed specifically for its slim-design.
Aluminum-Cast Basket: The woofer is housed in a die-cast aluminum basket for increased rigidity and long-lasting reliability.
Spring Terminals: The spring post terminals on one side of the woofer connect to your amplifier's wiring. The posts will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Enclosure: Kenwood recommends a sealed box with an internal volume of 0.6 ft³.
Additional Measurements:
- Frame: the speaker frame doesn't have a uniform diameter; at the widest points the diameter is 12.408", at the narrow points it's 10.811"
- Woofer Displacement: 0.028 ft³ (0.8 liters)
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
These subs surprised me. They were installed in a shallow subwoofer enclosure designed for my Ram 1500 crew cab, pushed via a Kicker mono amp. Great, accurate performer to say the least! I've had deeper mount subs that didn't thump like these.
Aris from Rex, GA