About the Diamond Audio D162.5
Listening to music on factory speakers is about as exciting as math homework. Diamond Audio designed D1 speakers to bring out the best in your favorite tunes — you'll hear lots of musical detail that makes for a very entertaining ride, even if it's just across town.
Built for accuracy
This D162.5i 6-3/4" component speaker system features copolymer woofer cones that are injection-molded for consistent strength across the cone area. A resilient rubber surround secures each light, responsive woofer for precise cone movement, so you'll hear plenty of punch from the guitar and drums. The brushed titanium finish on the woofer cones give this component system a glossy, high-end look.
Clear, articulate aluminum tweeters
Instead of plastic film tweeters, Diamond Audio uses aluminum dome tweeters for sparkling, extended highs, so all the rich musical detail in your tunes reaches your ears. Separate crossovers use an advanced design to send the high notes to the tweeters and low notes to the woofers for the cleanest, most natural sounding vocals and instruments. The heavy-gauge stamped steel basket gives the woofers the strength and stability they need to rock hard for the lifetime of your system.
Product highlights:
- system includes two 6-3/4" woofers, 2 tweeters, and 2 crossovers
- copolymer woofer cone with rubber surround
- 1" aluminum dome tweeter
- external 2-way crossovers with tweeter protection
- power range: 5-50 watts RMS (100 watts peak power)
- frequency response: 55-20,000 Hz
- sensitivity: 85 dB
- top-mount depth: 2-1/2"
- warranty: 1 year
- MFR # D162.5
What's in the box:
Diamond Audio D162.5 owner's manual
- 2 Woofers
- 2 Tweeters
- 2 Crossovers
- 2 Woofer grilles
- 2 Woofer grille frames
- 2 Flush-mount tweeter mounting cups
- 2 Metal spring clips for flush-mount tweeter cups
- 2 Surface-mount tweeter housings
- 2 Adhesive backed woofer gaskets
- Two M4x30mm Machine screws
- Four 1/2" Self-tapping screws
- Twelve 3/4" Self-tapping screws
- 12 Speed clips
- Putty for woofer grilles
- 4 Crimp-on 0.110" quick slides
- 4 Crimp-on 0.187" quick slides
- Owner's Manual
Customer reviews for Diamond Audio D162.5
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Diamond Audio D162.5
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Injection molded Polymer | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 85 | |
Frequency Response | 55 - 20k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 2 1/2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 5/16 | |
Mounting Height (Inches) | 0.238 | |
Frame Width | 6.515 | |
Frame Length | 6.515 |
Product Research
Features
Woofers: The Diamond Audio D162.5 component system includes woofers with injection molded polymer cones. This design results in uniform cone thickness for superior linearity and clarity.
Woofer Size: Diamond Audio refers to the D162.5 as a 6-1/2" speaker. The 5.3" cutout diameter, however, fits the industry standard for a 6-3/4" speaker. Please confirm fit using the Crutchfield Vehicle Selector before purchasing.
Magnet Cover: The woofers are shipped with rubber magnet covers installed. If needed, the covers can be removed, effectively making the magnet diameter approximately 1/4" smaller.
Tweeters: Each speaker uses a Ferro fluid cooled 1" aluminum dome tweeter with a neodymium magnet.
Mounting Options: The tweeters can be surface mounted or flush mounted using the included housings.
Tweeter Dimensions:
Frame Diameter | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|
Flush Mount | 2.0" | 1.74" | 0.40" | 0.24" |
Angled Surface Mount | 1.7" | N/A | 1.1" | Screw Depth |
Crossover:
- Tweeter Output: The crossovers offer two tweeter output level settings, selectable via an internal jumper: flat and -2 dB.
- Barrier Strips: Each crossover's connections are screw terminals that will accommodate spade connectors up to 0.29" wide.
- Dimensions: The crossover has the following
dimensions:
- Width: 2.6"
- Height: 1.45"
- Depth: 4.75"
- Connection Note: The component system comes with no speaker wire (other than the 10" length attached to each tweeter).
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
All the bang for your buck! Outstanding sound and quality.
Brad from Moore, OK