About the Diamond Audio D374
You hit the highway and crank the stereo, but your factory speakers just can't keep up. Diamond Audio designed D3 speakers to deliver strong performance in your car — you'll hear power and impact in your music that makes for a very entertaining ride, even if it's just across town.
Removable 1" aluminum tweeters
These D374 6"x8" convertible speaker system features sizeable 1" aluminum dome tweeters that give you exceptional clarity — you'll be able to hear sparkling detail in your music, even when the bass gets heavy. You can mount these speakers as 2-ways in your factory openings, or you can remove the tweeters from the woofers and mount them in a spot that'll create the best soundstage in your ride.
Mineral fortified cone
Diamond Audio uses injection-molding to create a light, stiff graphite copolymer cone that offers consistent strength. A butyl rubber surround secures the woofer for linear cone movement, so you can count on strong, accurate performance. External crossovers send the right frequencies to the woofer and tweeter, so vocals and instruments sound well-defined and natural. The Rear Fill outputs on the crossover networks allow you to tie in a pair of rear speakers without affecting impedance.
Non-resonant frame resists distortion
Diamond uses a unique energy-absorbent ABS composite frame that resists unwanted resonance better than steel or aluminum, so your favorite music sounds just as the artist intended.
Product highlights:
- 6"x8" 2-way convertible speaker system — includes two woofers, two tweeters, and two crossover networks
- graphite-fortified copolymer woofer cone with rubber surround
- non-resonant ABS composite frame
- 1" aluminum dome tweeter (can be mounted in woofer or separately)
- outboard crossover network with Rear Fill outputs
- power range: 6-60 watts RMS (120 watts peak power)
- frequency response: 52-20,000 Hz
- sensitivity: 90 dB
- top-mount depth: 2-5/16"
- warranty: 1 year
- MFR # D374
What's in the box:
Diamond Audio D374 owner's manual
- 2 Woofers
- 2 Tweeters (coaxially mounted on the woofers)
- 2 Phase plugs
- 2 Crossovers
- 2 Flush-mount tweeter mounting cups
- 2 Metal spring clips for flush-mount tweeter cups
- 2 Surface-mount tweeter housings
- 2 Adhesive backed woofer gaskets
- Two M4x30mm Machine screws
- Four 1/2" Self-tapping screws
- Twelve 3/4" Self-tapping screws
- 12 Speed clips
- Grille putty
- 4 Crimp-on 0.110" quick slides
- Owner's Manual
Customer reviews for Diamond Audio D374
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Diamond Audio D374
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Graphite Inject Copolymer | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 90 | |
Frequency Response | 52 - 20k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | 2 9/16 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.841 | |
Frame Width | 5.51 | |
Frame Length | 8.65 |
Product Research
Features
Woofers: The Diamond Audio D374 convertible component system includes 5"x7" woofers with graphite injected molded copolymer cones. This design results in uniform cone thickness for superior linearity and clarity. It also has a low weight to rigidity ratio for decreased distortion and improved bass response. The speakers are shipped with the tweeters coaxially mounted to the woofers, but they can be removed and mounted separately, as a component set. When the tweeters are removed the woofer's mounting height decreases to 0.32" (if bottom mounted the tweeter protrusion decreases to 0.062").
Magnet Cover: The speakers are shipped with rubber magnet covers installed. If needed, the covers can be removed, effectively making the magnet diameter approximately 1/4" smaller.
Tweeters: Each speaker uses a Ferro fluid cooled 1" aluminum dome tweeter with a neodymium magnet. When coaxially mounted the tweeters are angled and swivel so you can direct them toward the listening positions.
Mounting Options: When removed from the woofers, the tweeters can be surface mounted or flush mounted using the included housings.
Tweeter Dimensions:
Frame Diameter | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|
Flush Mount | 2.0" | 1.74" | 0.43" | 0.24" |
Angled Surface Mount | 1.7" | N/A | 1.0" | Screw Depth |
Crossover:
- Tweeter Output: The crossovers offer two tweeter output level settings, selectable via an internal jumper: flat and -2 dB.
- RAF: In addition to the woofer and tweeter outputs, each crossover has a third output for a Rear Acoustic Fill (RAF) speaker. The RAF speakers are powered by the same 2-channel amp as the component set and are apportioned 15%-20% of the total power. The RAF output is full range.
- Barrier Strips: Each crossover's connections are screw terminals that will accommodate spade connectors up to 0.375" wide.
- Dimensions: The crossover has the following
dimensions:
- Width: 4.73"
- Height: 1.35"
- Depth: 3.55"
- Connection Note: The component system comes with no speaker wire (other than the 7" length attached to each tweeter).
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...