About the T-Spec 0PK Installation Kit
Power up to specification
Power up to specification
This 0PK amplifier wiring kit from T-Spec helps deliver the power you need to drive your music to the highest level. The kit includes 1/0-gauge power and ground wires, an 18-gauge turn-on lead, 12-gauge speaker wire, a fuse holder, and an assortment of hardware useful for your installation. T-Spec Competition Rated Car Audio makes wiring products that meet all American National Standards Institute (ANSI) and Consumer Electronics Association (CEA) standards for size, strand-count, resistance, and insulation quality. With T-Spec wiring, your amps and speakers will get the energy they need to give you peak performance.
Oxygen-free virgin copper
Recycled copper often contains impurities that can impair conductivity, so T-Spec uses only oxygen-free non-recycled virgin copper in all their wire to maximize signal and power flow. The high strand count and special PVC blended jacket give T-Spec wire an extraordinary flexibility, making installation easier. The power and ground wires in this kit each come with a sturdy ring terminal machine-crimped to one end, ensuring a secure contact with your car's battery and chassis ground. T-Spec even pre-installed the fuse holder (with a 250-amp fuse included) inline on the power wire, for your safety and peace of mind.
This wiring kit does not include patch cables. You will need to purchase those separately, in order to complete your amplifier installation.
Product highlights:
- amplifier wiring kit
- all wires made of oxygen-free non-recycled copper
- wires meet all ANSI and CEA standards
- 17 feet of 1/0-gauge matte pearl power cable with ring terminal
- 3 feet of 1/0-gauge matte gray ground wire with ring terminal
- 12 feet of 12-gauge gray and white speaker wire
- 17 feet of 18-gauge blue turn-on lead wire
- brass ANL fuse holder with 250-amp fuse installed on power wire
- comes with an assortment of hardware including wire ties, a firewall bushing, and various crimp-on wire terminals
- warranty: 1 year
- MFR # V10-0PK
What's in the box:
- 17' v10 1/0 AWG OFC multi-strand power wire in a matte pearl white PVC blended jacket
- In-line v12 compact brass ANL fuse holder with a 250A ANL fuse (installed)
- 3' v10 1/0 AWG OFC multi-strand ground wire in a matte gray PVC blended jacket
- 17' 18 AWG OFC remote turn-on wire in a blue jacket
- 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket
- Two 1/0 AWG crimp-on spade terminals with white (power) and silver (ground) boots
- Four 12 AWG crimp-on spade speaker wire terminals (amplifier side)
- Four 12 AWG crimp-on quick-slide terminals (female)
- Red 18 AWG crimp-on spade terminal
- Red 18 AWG butt connector
- Firewall bushing for 1/0 AWG wire
- 8 Wire ties (6" length)
Customer reviews for T-Spec 0PK Installation Kit
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the T-Spec 0PK Installation Kit
Product Research
Features
Overview: This T-Spec v10-series amplifier wiring kit contains enough power and ground wire, speaker wire, turn-on wire, and connection accessories to install a single amplifier in most vehicles. The OFC (oxygen-free copper) wire included in this kit meets CEA-2015 and ANSI specification for wire gauge, and is BC-5W2 marine compliant. The high strand count gives you maximum flexibility and maximum conductivity to give your components the greatest current capability.
Contents: This v10-series amplifier kit contains the following:
- Power Wire: 17' v10 1/0 AWG OFC multi-strand wire in a matte pearl white PVC blended jacket. The wire has an in-line v12 compact brass ANL fuse holder with a 250A ANL fuse. The battery end of the wire is terminated with a nickel-plated crimp-on ring terminal with a white boot and an 8.5mm hole.
- Ground Wire: 3' v10 1/0 AWG OFC multi-strand wire in a matte gray PVC blended jacket. One end is terminated with a nickel-plated crimp-on ring terminal with a silver boot and an 8.5mm hole.
- Turn-On Wire: 17' 18 AWG OFC remote turn-on wire in a blue jacket. Both ends are un-terminated.
- Speaker Wire: 12' v10 12 AWG OFC speaker wire in a white/gray PVC blended jacket. The white jacketed conductor is square in shape, and is marked for positive (+) connection. The gray jacketed conductor is round in shape, and is unmarked.
- Installation Accessories:
- Two 1/0 AWG crimp-on spade terminals with white (power) and silver (ground) boots for amplifier connection
- Four 12 AWG crimp-on spade terminals for speaker wire connection (amplifier side)
- Four 12 AWG crimp-on quick-slide terminals (female) for speaker wire connection (speaker side)
- Red 18 AWG crimp-on spade terminals and red butt connector for remote turn-on wire connection
- Firewall bushing for 1/0 AWG wire
- 8 Wire ties (6" length)
The T-Spec 0PK Installation Kit replaces these items
StreetWires ZeroNoise 5 ZN5K00
- 1/0-gauge blue power and clear ground cables with ring terminals
- 16-foot turn-on lead
- fuse holder with 250-amp fuse
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I was shocked at the size of this wire, my advisor recommended this wire kit to wire my 1200watt pioneer amp, although it only called for a 4gauge, all is ok though I just used a branch on the end and now I have extra power in the back of my truck for anything I might add in the future.
Clint from Texas